CRKT Technician
-
Thanks so much!

Great write-up. Kind of bummed out by this one. I was hoping it would be better. Many areas for potential improvement.
I hope they do not give up on this. See what criticisms people make, and tune things to meet market demands. -
The pricing on this in my country puts it into the same ballpark as the lower end Leatherman products; I think I want one to leave in my workshop for my bikes. If the feeler gauge and magenetic pickup works that enough to justify it for me.
I see the gauge has both mm and inch markings on it, should be useful setting my bikes spark plug to 0.6mm or 0.028" looking at the graduations.
On a bike the reach is fine, usually just to the bash plate or in a small recess.
Scraper looks handy.Could you use normal hex bits in it or will they slide in too deep?
-
You could put two standard hex bits in there. But it's not magnetic.
-
@David Bowen said:
The tool in the closed position is 4.375 inches and 6 tools are available on the outside of the tool. Outside opening tools are a major convenience and a lot of companies don't go to lengths to give customers this benefit. On one side of the tool we have a a one hand opening blade that's 2.5 inches in length and made out of a wonderful 5cr15mov. Why don't l sound excited? The blade steel is the Chinese equivalent of 440a. This blade steel will sharpen up rather quickly but dull in short order. For a tool that's being used for various duties that a multitool does I would have like to have seen at least 420hc. A positive note is the blade is slip-joint style; this is great for our folks who live where knife laws are a bit on the tough side.I would expect 440A to have superior edge holding ability to 420HC. 5Cr15MoV has nominally 0.5% Carbon, which is about the same as Latrobe's 420HC, but outside the AISI range for 440A.
http://zknives.com/knives/steels/steelgraph.php?nm=420HC%2C440A%2C5Cr15MoV&ni=789,510,830&hrn=1&gm=0

-
The tool in the closed position is 4.375 inches and 6 tools are available on the outside of the tool. Outside opening tools are a major convenience and a lot of companies don't go to lengths to give customers this benefit. On one side of the tool we have a a one hand opening blade that's 2.5 inches in length and made out of a wonderful 5cr15mov. Why don't l sound excited? The blade steel is the Chinese equivalent of 440a. This blade steel will sharpen up rather quickly but dull in short order. For a tool that's being used for various duties that a multitool does I would have like to have seen at least 420hc. A positive note is the blade is slip-joint style; this is great for our folks who live where knife laws are a bit on the tough side.
I would expect 440A to have superior edge holding ability to 420HC. 5Cr15MoV has nominally 0.5% Carbon, which is about the same as Latrobe's 420HC, but outside the AISI range for 440A.
http://zknives.com/knives/steels/steelgraph.php?nm=420HC%2C440A%2C5Cr15MoV&ni=789,510,830&hrn=1&gm=0
I know the carbon and chrome content is higher but it doesn't feel it. Maybe it's not heat treated well or the info I found on the internet for comparison isn't quite right.
I also have to add that this is my second Technician. First one I had to return because the pliers head had a lot of play in it. Side to side was bad, teeth wouldn't line up and would not cut wire well. On my current tool the magnet in the telescopic tool came out. I took it out of the sheath and it was stuck between the handles of the tool. It's glued back in place with some super glue now. CRKT has had a lot of wins over the years and have produced some awesome stuff, Lord knows I've owned a bunch of it. But quality control seems to be am issue with various companies when they try to hit a particular price point.
Sent from my SM-T377V using Tapatalk
-
This seems like a good concept--I love the idea of keeping one in a motorcycle tank bag--but one not executed well. I get the sense that form won out over function.
Thanks for a good review, David. I think you saved me some money.

-
Nice review

I think I'll get one of those sometime
-
To me it looks like the handles would be a bit more ergonomic if they were swapped over.
-
-

There is room for another one or two barrels to make the magnet longer.
You could always open just one handle, to get even more reach though.

If the handles stay open like Leatherman tools, you could go with both handles half open, for maximum reach.

True, I tool this into consideration. Is just a pity that when extended it's only about twice the size when it's collapsed. Somewhere I have one that goes in a shirt pocket and it's 3 inches long not including the magnet and ed expands to like 4 times it's length. Yes I'm sure it could bend easy and fragile, but extended reach could have been more.
Sent from my SM-T377V using Tapatalk
-
The only English review on it so far:
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

