Do I need a sharpening system?
-
So I love my Lansky system sharpener
but as a kind of response to JRs sharpening question I had an ideaWhat if you only want to sharpen a knife or two and didn't want to buy an expensive system
After all you might only need to sharpen once or twice a year inbetween honeing
So looking at the sharpening systems,
in the simplest terms you need something to hold the knife edge to the 'grinding' surface at a fixed angle,
Either the cutting edge or the grinding surface should be stationary as the other movesThat sounds easy :D
So take a fairly flat piece of wood and glue some fine sand paper (wet&dry, emery cloth) to one or both sides
I'm using 240 & 400 grit

With a screw and washer (two would be more stable) secure the blade to a small scrap of wood,
screw that to the edge of a bench, table or board
Colour in the edge of the blade with a sharpie
Prop the far end of the sharpening stick on a brick, 2x4 or book.
Move the prop backwards until the stick is at the same angle as the cutting edge
Gently start to sharpenA few pictures to explain


So long as you can hold the blade steady nothing needs to be complicated


Then remove the blade screw flip the knife over and start again without moving the prop

-
Perfect example of the KISS philosophy

-
Nice work

If you want better accuracy in the future you could have the prop on a threaded bar adjuster to change the angle
-
Yep, but I was trying to make it cheap and simple, nothing special needed except some 'sand paper'
(If you listen carefully you can hear old blokes rolling in their graves, saying 'sand paper? Sand Paper? that's for budgies cages'
) -
Got to try this.

-
Hmm
interesting..
JR -
This isn't just for JR it's for anyone who wants to try some sort of jig/system
If you like it you can upgrade the prop to a nice bit of wood and insert some dowels for different angles
Make more sanding sticks with different grades of paper
Replace the sticks with diamond 'stones'
Up size it for bigger knivesEverythings adjustable ;)


400grit wrapped around my diamond stone

-
Nice idea Tony

Have you considered putting some of your ideas on the you tubes? They would make excellent 'how to's'
-
Sounds a bit like hard work to me Mate

Although it has been said I do look like a movie star from some angles

-
@Sparky415 said:
Sounds a bit like hard work to me Mate
Although it has been said I do look like a movie star from some angles

Horror movies?

-
Now that’s interesting to get the right angle..
JR -
Sounds a bit like hard work to me Mate

Although it has been said I do look like a movie star from some angles

Horror movies?

cough Elephant man cough cough
-
@Pablo O'Brien said:
Sounds a bit like hard work to me Mate

Although it has been said I do look like a movie star from some angles

Horror movies?

cough Elephant man cough cough
Is it weird that I instantly understood what you meant?
I thought Rocky Dennis from Mask,,
JR -
@Pablo O'Brien said:
[quote author=Sparky415 link=topic=76719.msg1671599#msg1671599 date=1522856903]
Sounds a bit like hard work to me Mate
Although it has been said I do look like a movie star from some angles

Horror movies?

cough Elephant man cough cough
Is it weird that I instantly understood what you meant?
I thought Rocky Dennis from Mask,,
JR
[/quote]
Nope that’s not it. This case was much older and different, in Victorian times. -
I was really curious to see what alternatives to a sharpening system I would discover here.
...Only to find a DIY sharpening system
-
@MadPlumbarian said:
Now that’s interesting to get the right angle..
JRDo you mean the uni-strut 'prop' JR?
Again you just move it forwards until you have the desired angle -
I was really curious to see what alternatives to a sharpening system I would discover here.
...Only to find a DIY sharpening system
But it's a system you can make for yourself, it can be as simple or as complicated as you like

I just always thought using a stone was a way to get a sharp edge, but I guess 1000grit paper on a block is the same as a 1000grit stone..
JR -
Now that’s interesting to get the right angle..
JRDo you mean the uni-strut 'prop' JR?
Again you just move it forwards until you have the desired angleYeah, move it down to the lower hole to narrow the pitch
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login