All things paddling
-
Here are a few pics of some of the Lamontagne Fleet.


The yellow/orange one is the Point 65 XO13 that Megan usually paddles. When I got it, it had gas pedal style foot pedals to control the rudder, but with my messed up ankles, the gas pedal style doesn't work for me. The gas pedal style rotates around a pivot point, so I changed it to L style brackets that push back and forth. Those are a simpler, cheaper options and not a lot of manufacturers offer them any more as they seem pretty basic.
The blue and white one is my father's Riot Tourlite 15, a thermoformed plastic skin on frame design similar to my big fiberglass boat. Instead of fiberglass (or kevlar or carbon fiber etc) the Tourlite uses a plastic sheet that is heated and moulded over a frame to create a multi chine hull for added stability. The design didn't last long, likely because of the expense of making it, but makes for a nice boat that combines the (almost) lightweight factor of fiberglass and the added resiliency of the plastic, which is less brittle than fiberglass. Unfortunately it is a bigger pain in the arse to repair than fiberglass so you have to be really careful with it. The skin on frame design allows for a much sharper keel, which you notice when paddling in rougher water. This boat, like my big fiberglass one, tends to punch through waves and pop out smoothly on the other side, while the rotomoulded plastic boats have a flatter hull that tends to go over the waves instead of through them.
Speaking of rotomoulded boats, like the Point 65 boat above, the green one is my brother's rotomoulded plastic Current Designs Whistler 14. It's a nice boat with a rudder and is a bit more compact than the Point 65, despite being a foot longer. The forward deck is a lot lower, while the Point 65 deck feels like it was moulded with a beach ball in the cockpit. My brother also has an MEC (Mountain Equipment Co Op) Aegir deck bag. I originally got one for my own kayak, but it got in my way more than it helped, so I gave it to my father, who liked it so much that he also got one for my brother. :D
Rotomould boats are usually stronger and more stable than skin on frame designs, but they unfortunately weigh almost twice as much due to the thickness of the plastic. In fact, my 17 foot boat weighs in around 40 pounds, while the Point 65 13 foot boat weighs 52 pounds. The flip side is that a fiberglass boat costs 2-3 times as much as a rotomoulded one, and a kevlar of CF boat can be double that of a fiberglass one.

These are also part of the Lamontagne Fleet- a trio of Pelicans, made by the same folks that do the Pelican boxes, flashlights etc. The Canoe is a Pelican Explorer 14.6 DLX and included moulded in seats and cargo box/center seat. It is a nice, robust boat that suffers from being quite heavy. I have paddled this boat and I like it a lot, although this isn't one you want to paddle by yourself due to the weight.
The red and white one is a Pelican Summit 100, a ten foot molded plastic boat using Pelican's proprietary RAM-X plastic that is surprisingly strong despite it's thinness. It has no frame- it is just two molded halves heat sealed together and weights all of about 35 pounds. It's short, being only ten feet long but is also remarkably wide, making it super stable. I have one just like it in my garage in Halifax that I picked up brand new from Canadian Tire for under $300. This particular one belongs to my older nephew.
The blue one is an older version of the Summit, made from a thicker plastic and is a rotomould. It is also the boat that is responsible for all of the other boats in the Fleet. This is the boat my father started paddling in, when friends visited with a pair of them. He tried it and liked it, then when they decided to upgrade, sold him this one, which he paddled for a couple of years before upgrading to the Riot. My brother and I paddled this Pelican for years until I got my big fiberglass boat and my brother got the Whistler. Then I got the Point 65, my brother's wife wanted the canoe and so on and so on. My younger nephew now paddles this boat, and is a lot more interested in paddling than his older brother.
These are inexpensive boats, good for farting around at the cottage, but are not so good for actually covering any distance. They are short and wide and track terribly compared to every other boat in the Fleet. They are stable though, which is great as both boys like to stand up in them and jump off them to go swimming. When the boys get older I have no doubt they will graduate to bigger boats, but at this point they are still unable to keep up with the rest of us on the longer trips the rest of us like to go on.
I hope to add another canoe to the mix soon. I am looking for a decent deal on an old Sports Pal canoe, which is a Canadian brand built not far from here in a city called North Bay. They make them out of aluminum and the boats are extremely light- a 12 foot aluminum canoe will weigh as little as 35 pounds! And, they are very resistant to puncture, but when you do, there is a proud Canadian tradition of repairing them with tree sap and beer cans. :D
Def
-
Some nice equipment here.
Im running some rather simple equipment and gear, really. A 10 foot Wilderness Systems Pamlico, or a 9.5 foot Islander Swifty. They are both about 10 years old and have been repaired with an old Frisbee and a heat gun. An Extra Sport life vest, and some Field & Stream branded paddles. I keep a rope with me, a knife, and whatever I need for lunch and water. I usually just cruise, sometimes blast to one side of a lake and back, sometimes I fish. Scout the ThunderBeagle has been known to accompany me, and I keep him clipped to a harness which is clipped to the seat. He likes to stand at the bow scouting for seabirds or watching for other dogs and animals along the shore, and will alternately jump in and then ask to be hoisted out of the drink.
-
Kayaks on the Jeep WJ a little late in the season...

-
^^^ Wasn't ready to give up for the season...
-
Looking good! I have similar kayakholders on my wj [emoji3]
Here are some pics from yesterday's trip paddling around in Gothenburg

Through an amusement park



[It's not failure if you learn something from it]
-
Great pics guys!
As for being too late in the season, be careful, I got my boats out too early this year and winter wasn't quite done with us.... :ahhh


Def
-
@kottskrapa said:
Looking good! I have similar kayakholders on my wj [emoji3]Here are some pics from yesterday's trip paddling around in Gothenburg

Through an amusement park



[It's not failure if you learn something from it]
Nice gear, Kotts! And what an enchanting place in which to be paddling!
Yeah, my WJ has done well by me. A lot of people don't know that they have the same motor and same Dana 35c and Dana 30 axles that were in the CJ and Wranglers all the way up to 2006. So when wrangler driver look askance at my ride, I like to remind them I have the same power and gearing they have, with more passenger and storage, and more tow capacity.
I originally wanted an XJ, but settled on this. I like it
This very day, I am installing Iron Rock Off Road 2 inch lift springs, with new isolators, new Pro Comp shocks, and new Moog anti sway bar links. We will see what it needs from there.
I'm stoked about it
-
@Grant Lamontagne said:
Great pics guys!As for being too late in the season, be careful, I got my boats out too early this year and winter wasn't quite done with us.... :ahhh


Def
Nice one, Def. We seem that much more rugged (or daft) to the rest of the world when they see our kayaks with frost and icicles on them
-
Sometimes winter makes me wonder what the hell I am doing here too....
But that only lasts between December and April....

Def
-
Looking good! I have similar kayakholders on my wj [emoji3]
Here are some pics from yesterday's trip paddling around in Gothenburg

Through an amusement park



[It's not failure if you learn something from it]
Nice gear, Kotts! And what an enchanting place in which to be paddling!
Yeah, my WJ has done well by me. A lot of people don't know that they have the same motor and same Dana 35c and Dana 30 axles that were in the CJ and Wranglers all the way up to 2006. So when wrangler driver look askance at my ride, I like to remind them I have the same power and gearing they have, with more passenger and storage, and more tow capacity.
I originally wanted an XJ, but settled on this. I like it
This very day, I am installing Iron Rock Off Road 2 inch lift springs, with new isolators, new Pro Comp shocks, and new Moog anti sway bar links. We will see what it needs from there.
I'm stoked about it
Some pics when done I hope?
[It's not failure if you learn something from it]
-
Some excellent stuff here folks. Grant pointed out this thread (great run down on the paddles BTW mate) and I though I should add some pics of my own.



-
I'm pretty new to paddling only started a few years ago. Pictured below is my "fleet" - 3 x Dagger Stratos 14.5s

These boats were all bought new as second hand paddling gear is like hens teeth here. Why did I choose this particular boat ?
Well, ideally I'd love a nice 17 footer expedition type sea boat - not gonna happen mostly cos I can't afford one :D. I choose the dagger for a few reasons - i've used their river boats and liked them, found them to be good quality; because of finances I was constrained to getting a touring boat and the dagger seemed the best bang for my buck. Finally, the first one I got (the yellow one) i got a real good deal on. It is relatively small (14.5 foot) but handles very nice, has quite a rocker so is maneuverable but that in turn impacts it's handling over long distances. However, most of my paddling now days is day trips. It is light (about 25kg) so I can put it on the roof of my van by myself.
The yellow one is mine.Link to the manufacturer - https://www.dagger.com/eu/en/kayaks/stratos-145-s
Also pictured are some of the paddles we use - Werner Shuna, Werner Tybee and the splits are an aluminium set I got off amazon. I've paddled with them and they're good enough to get one of us out of trouble.
We generally use Palm BA's and we carry an FAK, 2 tow ropes, mobile phone(s) and a VHF, and a knife per BA as well as other miscellaneous kit. If anyone is interested in pics of the BA's and the rest of the gear I can take some.
-
My brother has a set of Werner paddles that he loves. I couldn't tell you the model of them though, but they are a beautiful set. I think the only reason I don't have any Werner paddles is because the place I get the deals on mine doesn't carry Werner and I can't afford to get them at regular price! :P
I have also had a set of cheap Carlisle paddles with an aluminum shaft, but I gave those away years ago when I decided I was never going to use them again. Actually they were on an extended loan until someone else could replace the even worse Pelican flat bladed paddles they had.
https://www.pelicansport.com/ca_en/standard-kayak-paddle
These things are dangerous- I have almost flipped kayaks using paddles like these because they get out of alignment in your hand and then provide no resistance in the water.
These are the Carlisle paddles I had:
When I discovered fiberglass and carbon shafts I never went back to aluminum! :ahhh
Meanwhile, my father prefers these Carlisle paddles:
They are also very nice and extremely light, but the blades are fiberglass and I am a little too rough on paddles to do fiberglass blades myself. They wouldn't last too long.... :ahhh
Def
-
I couldn't help myself- last night I added to the Lamontagne Fleet.
I am justifying it because my big fiberglass boat is taking too long to finish, and the guy that was going to clear coat it for me in in the hospital and won't be able to get at it for another month, and the season is almost over and I am missing paddling too much! :ahhh

Its a Sun Flight model, produced by Riot, a formerly Canadian company that went out of business a few years ago, and was bought up by a Chinese company. Riot is the same company that made my father's blue and white boat above. As you can see, the color and sizing very closely matches the Point 65 XO13 that Megan paddles.

This one is 12.5 feet long and is a hybrid whitewater boat, meaning that it (supposedly) works well in whitewater and as a light touring model. We will see, I haven't gotten it into the water yet, so I will reserve judgement until I do. But, I have been wanting a whitewater boat, so I am glad that I found this one. And, I was glad for the price- only $300 and it included a dry bag, skirt and paddle!

For that price, you may be wondering what is wrong with it.... well, it's not perfect. The seller told me he paid $1275 for it, and that may be true, but I can tell you that he got ripped off for it if he did. This is the cheapest version of the boat available. It has a cheap seat (to which they have added a seat pad) and the front storage hatch is molded in but was never cut open for use. The shock cord fore and aft of the cockpit is pathetically cheap and saggy, but I will replace that in minutes. The back hatch is complete, but there are no bulkheads, so the entire interior of the boat from bow to stern is open, with no dry storage, which is probably why they had a skirt and dry bag with it.



And perhaps the most obvious reason this was a cheap boat (well, ok, second most obvious, after the uncut front hold!) is that it was designed for use with a rudder, and yet one was never installed.

You can see the line holes that were molded in but never drilled (that's the teardrop shaped holes on either side) and the two holes in the molded in triangle where one would mount the blade rest, also never drilled, and the two screws in the stern for mounting the rudder housing. This is great because it will allow me to add a rudder later on if I so choose, but I may not as I am also well used to paddling without a rudder since I don't have one on my big boat.
With all that is "wrong" with the boat, what is right with it? Well, for one, the price was absolutely right for it. You'd have a hard time finding any boats for that kind of money, and even the cheap Pelicans usually go for that or more. For another, I like that I can shoot rapids and other whitewater with it. It will also be fun to surf in it when I get back to the ocean. It has a multi chined hull (exclusive design to Riot) that supposedly increases secondary stability and helps it track like a much larger boat- I will post pics of it later, but it's funny because it looks like a certain part of the female anatomy and that amuses the 12 year old in me. Also the length and color matching the Point 65 is also kind of neat. I'm not 100% in love with the color schemes on either of them, but it is cool that they sort of match... and in the end, color don't make it go no faster. :D
I'm going to clean it up today, and if all goes well, maybe get it into the water, and I will let you all know how it goes afterwards.
Def
-
Congratulations on the new boat, Def.
It's kinda nice to have a 'beater' kayak.
I prefer a rudderless kayak myself. I like using the foot pegs to brace against and can steer just fine with the paddle. But, I do like sealed bulkheads fore and aft--less water to pump out after a rollover and a bit more flotation. Still, dry bags can give you the same benefits.
Enjoy the new 'yak!

-
Great stuff Grant.
Now get it in the water quickly before it all turns to ice. ;) -
I'd be in the water right now if it weren't for the impending thunderstorm.

Def
-
These are the new paddles.

They are 230cm Seaclude paddles from Aquabound and they are absolutely mint. I doubt they have been used more than a couple of times. They have a really nice blade but since they have an aluminum shaft they are virtually worthless to me, even though these are roughly $100 paddles. I am tempted to try and swap the blades with the chipped ones on my bent shaft paddles, but I'll probably just list them for sale locally. I'd love to pass them to a forum member, but the shipping would be a killer. I am willing to look into it though, should anyone want them.
Def
-
Good job Grant best of luck with the new boat.
Did you get to paddle it yet ?Rudders don't seem overly common in Europe most boats I've paddled have skegs instead and probably because I learned to paddle without a rudder I dislike them.
-
Not yet, although it is raining so hard this morning that I could almost paddle down the street! :ahhh
I am hoping to get out later today, even if it's a short paddle.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




