Project: Hobby Desk
-
No worries :D
Hopefully I should have the lamp back up and running next week, so maybe by next weekend, I might be able to finally get a play with it.
It looks like I need to grind my own lathe tools, but there is some stock included, and I've got a few simple milling tools for it now too - a few dinky little endmills in HSS, and a carbide slot drill. I'll probably fudge anything else I need to do with dremel tools for now. I only need to do some simple rebating and thicknessing to start with anyway.
-
@MadPlumbarian said:
Here’s what I’m starting on with a very small hint..
JRI'll look forward to updates

-
Dang that took 2-1/2hrs, of course if I had a bench grinder it would have cut the time in a 1/4, and yet with a lathe probably down to 10min, but here it is, a duct tape keychain, not big and not heavy. I did something a while back using a cotter pin which worked great, only problem was it started to fall because there was nothing to support it.
Anyway, here you can see the carriage bolts head will support the tape as it hangs, but on mine the two nuts that I jammed together to create the end isn’t as wide as the head so you can see the edge of the tape, and over time might get a little ripped up, unlike that other one I posted, that’s kinda what I was aiming for,
JR

-
Nice work!

-
@AimlessWanderer said:
Nice work!
Thanks, not bad, it will do it’s job, but definitely not the best!
It will hold 18-24” of duct tape depending on what brand, that’s gorilla tape and since it’s so thick only 18”, but if it was regular stuff then easily another 6”.. but as you can see in that one pic the two other ones are two diff sizes, and I can say it’s come in handy!
JR -
I tried doing some commentary for that Gerber mod video.
I can't do it

I've stood on stage in front of a couple or three hundred faces, no problem. In fact I found it more nerve wracking, the fewer people were in front of me. Talking . into a microphone with nobody else there ... :ahhh too weird!
I think I need to overcome this somehow, as commentary will make it MUCH easier for the audience to follow along on some of the future videos.
-
@AimlessWanderer said:
I tried doing some commentary for that Gerber mod video.I can't do it

I've stood on stage in front of a couple or three hundred faces, no problem. In fact I found it more nerve wracking, the fewer people were in front of me. Talking . into a microphone with nobody else there ... :ahhh too weird!
I think I need to overcome this somehow, as commentary will make it MUCH easier for the audience to follow along on some of the future videos.
Don’t feel so bad, I can’t do it myself, I can’t do crowds, heck even if we have company my big thing is reading, I was never good in reading especially being dyslexic and if we’re playing one of these games that you got to read a card out loud and I don’t know the word and I have to try to pronounce I’ll freeze, tense up, the face turns red, that’s normally when someone says “you mean _____”? Yeah yeah that’s it. I’m horrible!
JR -
Al, remember, everyone thinks they sound weird through a microphone.
I thought I sounded like a squeaky annoying guy. :D And most of them are wrong.
Why not upload a little demo clip? -
Think of it as warm up.

-
I watched the video. Glad you made it. I think a script would make talking for the video flow better. For any good video production set the parameters before hand so you know you're always in frame without relying on the viewfinder. Music is always something viewers either like or not. I didn't love the combination. I always appreciate a speed up when something repetitious takes place. We get the gist of whats happening while not needing to see the whole process.
While many comments are regarding his voice his channel is popular and has grown. He gives some good tips IMO.
Spoiler:
-
Ok, I’m set.
The men’s three must needs at all times, knife, flashlight, and duct tape!
JR
-
Slick set up.

-
-
@Aloha007 said:
I watched the video. Glad you made it. I think a script would make talking for the video flow better. For any good video production set the parameters before hand so you know you're always in frame without relying on the viewfinder. Music is always something viewers either like or not. I didn't love the combination. I always appreciate a speed up when something repetitious takes place. We get the gist of whats happening while not needing to see the whole process.While many comments are regarding his voice his channel is popular and has grown. He gives some good tips IMO.
Spoiler:
Many thanks for the feedback
interesting video too 
Yes, there's much to learn from that first outing. In a way i'm glad it was so far off the mark, as that's a kick in the derriere to get some improvements made. Framing was better than I expected, but lighting, white balancing, editing, and sound choices all need serious work.
I did try scripting the commentary, but the discomfort of doing it at all made any benefits irrelevant. Hopefully that will ease though, and i'll get a bit desensitised to it.
As my vids won't be reviews, but modding vids, very often there'll only be one chance to get it right, and then that little part of the job is done. As such, I need to accept that at least in this early stage, my clips will be significantly inferior to others. I'm not out to make a "commercial" channel though, as I wouldn't be able to produce vids frequently enough for a start, but if I can make them enjoyable for you guys (and not have 90 seconds of turning a bolt), i'll call that a win for now :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



