Work gloves
-
There's a lot of forums that this topic could fit into, but as these are tools that protect your hands when working with tools, I thought Hand Tools might be the best place to be. :D
I am a huge fan of work gloves, and, more specifically, the thinner, lighter mechanic style gloves that keep the restriction of your fingers to a minimum. After all, they are no good to you if you have to keep taking them off to do things, a problem I have had for years at work with both work gloves and regular cold weather gloves. The big red/yellow set you see below are heavy duty insulated work gloves, great for doing heavy work outdoors in cold weather, but aren't so great when it comes to finer jobs. I started wearing the mechanic gloves years ago and they allowed me to write notes and do other things that I needed to do without removing them, and that was great- except that they aren't very warm.
To help out, since I have thin fingers, I would get the small thin wool glove liners and wear them underneath and that still allowed me to do most things, and when it got really cold I would put a small chemical heater in between the liner and mechanic glove and that made a world of difference, at least for a few hours at a time. These are available in two styles- small bags meant for gloves and pockets, which are good for 8 hours, and smaller, flatter ones meant for the inside of your boot, and good for 4-5 hours. I went with the smaller, flatter ones as there wasn't a lot of space left in the mechanic glove, and the things were cheap enough- I think I paid something like $12 for a box of 20 of them at Costco.
But, even in warm weather I like to wear gloves when I am working- perhaps it stems from the time I worked in kitchens in my youth, where clean hands were always stressed and turned me into the compulsive hand washer I am today. Either way, I am glad for them as I have slipped with tools many times and the damage to my hands was either avoided or, at least minimized thanks to the glove I was wearing. I still believe that my glove resisted a lot of tearing when I dropped the trailer on my finger last year, and may have contributed significantly to why I still have that finger today.
Anyways, here are a few of the pairs of gloves that I had handy for a photo. I told you about the yellow and red ones above. I don't use them for much, and the "insulation" consists largely of cotton just shoved in the fingers, and it gets pulled out often when taking them off. It then gets tangled or rips off so it's not there when you need them next. Still, for heavy gloves, they are hard to beat- I have used them for everything from hauling busted and splintery wood to old jagged steel to fending off dog bites.
The yellow and black pair are typical vented leatherette (don't think it's real leather) work gloves with plastic armor on the backs of the fingers. These are great for turning wrenches and screwdrivers in tight areas because they provide a lot of knuckle protection.
The red and black ones are a little softer and lighter than the yellow and black ones and don't have the armor on the fingers. They are better at fine work, but are also a tough enough fabric to withstand all kinds of accidents. They are the ones I was wearing when I dropped the trailer on my finger for example. Yes, some of the other gloves may have offered more protection, but I still have my finger and it still works, so I'll take it. :D
It's sad to say, but I tend to spend more time worrying about putting on gloves than I do eye protection.

Anyone else a work glove aficionado?
Def

-
Great thread idea, Grant!

It's like an interesting public service announcement.I use the Harbor freight mechanic's gloves most of the time. The cheap ones for general use and the premium ones for splintery work/steel wool work/metal working :)
For chemicals, I use disposable nitrile. 5mil for stain and clear coating. 9mil for stripping and harsh chemicals(acetone for example). Sometimes I use restaurant grade dish-washing gloves for using degreaser and harsh cleaners.
-
I have many pairs of gloves because I can usually never find a pair when I need them....

But yeah, I have a case of disposable gloves for dirty stuff like painting and staining etc. Went through a lot of them while working on my kayak this summer.
Def
-
I always have a few pairs of Mechanix Originals and Fast Fit for general purpose jobs.
I have heavy leather gloves for hauling out crap I cut out of the fenceline in the spring and summer. We have these awful thorn trees that grow very quickly and you do not want to grab a handful of those without some tough gloves. -
though here isn't often so cold to have to wear gloves at any time of the year (even in Winter), I like having them close.
I mostly carry them for work, but also carry an additional pair of Gardening Gloves in the EDC bag/man purse because I've found them useful on occasion for repairs, grabbing oily or dirty or sharp things, using tools, applying torque, or saving my hands in one way or another.

The ones I carry as a backup on my bag are like these.


Not heavy duty but enough for mosts tasks to prevent injury, damage or nasty results on your bare skin and hands
, mostly small blisters, skin pinching, scratches and small cuts 
Except for this time, when the blade went through the glove :P (mildly graphic)Spoiler:

-
Vinyl disposable gloves for painting and messy stuff and for work If I wear any it's the thin rubber coated kind these day. They give some protection and you can still pick up and hold nails and screws.
-
@Grant Lamontagne said:
I have many pairs of gloves because I can usually never find a pair when I need them....
But yeah, I have a case of disposable gloves for dirty stuff like painting and staining etc. Went through a lot of them while working on my kayak this summer.
Def
So true. Same with safety goggles. I don't beed them, I am tripping over piles of them. I desperately need safety goggles and bone are to be found. :ahhh
@ThePeacent said:
I mostly carry them for work, but also carry an additional pair of Gardening Gloves in the EDC bag/<u>man purse</u> because I've found them useful on occasion for repairs, grabbing oily or dirty or sharp things, using tools, applying torque, or saving my hands in one way or another.
The way I imagine you look has changed drastically.

-
Annnd cue photo of Grant in a dress......
-
I prefer thin, supple, leather gloves. I still need to be careful when dealing with thorny issues.

-
I mostly carry them for work, but also carry an additional pair of Gardening Gloves in the EDC bag/<u>man purse</u> because I've found them useful on occasion for repairs, grabbing oily or dirty or sharp things, using tools, applying torque, or saving my hands in one way or another.

The way I imagine you look has changed drastically.

it's this one


-
Careful amigo, you may lose the Spirit carrying it like that!
I also have several pairs of gloves like the orange ones you picture above- the fabric with the rubber on them. I find them very handy, but I tend to consider them as more or less disposable types, only using them a time or two, and not really keeping them around afterwards. Perhaps that is because I tend to use them for dirtier jobs involving harsh cleansers, resins and things like that. I do keep a pair like them in my work bag as well, and I usually buy them in multi- pack at Home Depot or Costco when I need them.
I have a nice pair of gloves that are similar, only the rubber covers them all the way up to the cuff, making them waterproof, which is great for working in the rain as they keep my hands dry. With the inner glove and occasionally the heater pack, they are ideal for working in the sub zero rain!
Def
-
@Grant Lamontagne said:
Careful amigo, you may lose the Spirit carrying it like that!don't worry Boss, it was just for the pic. Nothing is outside, too much attention they'd draw :ahhh
amd they are almost disposable to me as well, I buy them in 5 or 10 pair-packs for 8-12€
and go though several of them every season 
-
I also buy those in bulk. They can be reused, but when doing something really dirty can be taken off and simply disposed.
I have a spot in my landscaping that has poison ivy, so I have carefully disposed of several pair.
-
I use nitrile medical gloves for handling biohazardous materials and general filth, but those are obviously not suited for a lot of jobs.
At my actual work, in a medical facility, we use vinyl gloves.
-
Some of the glove types I have available from my employer There are nitrile coated gloves too.

-
@ThePeacent said:
it's this one

Nice setup, TP! I am now picturing you using that. Originally I always imagined you had a Batman belt of tools/knives.

-
I use single layer leather gloves sold with 4x4'ing in mind simply because they are comparatively cheap, they come in XL........and I go through them like TP while smithing!

Too funny to see how the fingers shrivel up from the heat, and inevitably I dunk my hand in water several times during a forging session, so when they dry out it's even more fun......
-
it's this one


Nice setup, TP! I am now picturing you using that. Originally I always imagined you had a Batman belt of tools/knives.

well I do have a "batman belt on me" :D but not that big or loaded
Usually I have at least one MT, SAK, Light and knife on the belt, and oftentimes a second of some of those or all.
The bag is mostly for backups, FAK; hygiene, etc. or additional tools
-
I will have to get a picture of my work gloves. Finally found a new job that I love and gloves are a must.
-
Looking forward to seeing them!
I keep at least one pair of work gloves in the Jeep at all times, as well as the ones at home and in my various work bags. There are two things that give me great joy in this world, and those are getting dirty with some good old fashioned mechanical work, and keeping my hands clean. One of these days a qualified therapist is going to make a fortune on the book they will write about me, but in the meantime I will keep getting dirty while trying to remain as clean as possible.

Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login