Cull Update
-
The Leatherman Wave was one of the most awesome tools on the market, until it too got afflicted with the indexable cutters overhanging the main gripping area (a major deal breaker for me), and was one of my most carried tools when I was running an engineering facility.
As that phase of my life came to a close, and I moved into lighter production facilities (ironically working with and visiting MUCH heavier engineering facilities), I wanted to move the tool to a knifeless format, so I could carry it more often. I also wanted to have the dedicated drivers from the Blast family, instead of the bit drivers.
In fairness, this modification could still do with a couple more tweaks, the diamond file and saw are a little tricky to get out since I moved them to the knife slots to make space for thescissors and prybar, and the handles are left very slightly open with the pliers folded away. However, it's still a very good tool, and one I'm pleased to have around, when I want something a little more tool heavy.

-
The TurboDiesel is one of the least modified tools. It only lost the knife and lanyard rind to make way for the blade exchanger. It was one of the primary tools in a little grab bag that I used to use when visiting friends and family, especially when I know odd jobs would likely need doing. That role has now gone too, but it's such a good tool, i'm loathed to part with it.
As highlighted in another thread of mine a few years ago when comparing the ergonomics of a wide range of multitools, the Diesel had by far the most comfortable handles when using the main gripping area. It's also one of the few full sized Gerbers that has the woodsaw, with the Strata being the other. The tool is to my mind a better alternative than the knifeless MP600 offered by Gerber, due to the absence of the evaporating carbide cutters. That said, the Diesel shouldn't be used for hard wire cutting, as the geometry of the cutters is all wrong for that.
So now, this is a bit of a "solution looking for a problem" type tool, but too damn good to let go of. Another minor weakspot on this tool is the 2.5D Phillips, whose form is rather like one of the Leatherman bits. However, in that grab bag, I also had a bit adapter, and a range of 1/4" bits. If I keep this tool, but not the whole grab bag, I might be better off replacing the Phillips with a full 3D one.

-
The MP6000 is another tool I don't have much use for at the moment, but is far too awesome to get rid of. It takes the tank like MP600, and adds a lot of function that just isn't available on them today.
Blunt nosed pliers with integral cutters, diamond file, awl, woodsaw and tweezers, all go towards making this tool 10x better than a regular stock MP600 for me (hence the naming as MP6000). I also have in my parts bin, a regular plier head with integral cutters, in case I want to ditch the blunt nosed pliers in future.

-
The final one of the urban knifeless mods is this Fuse-ilier mod. This is why I sold my NIB stock Knifeless Fuse. For being outdoors in a public setting, such as camping or hiking anywhere there's likely to be others (I'm never going to venture anywhere remote), this is typically my first choice. Paired with the Case Scout Jr, and the Vagnino Zipslip (orange clipped folder from post #4), or even the Mora Hi Vis fixed blade, this is the "fully loaded" equivalent of the KF4 and Climber Small combo I mentioned earlier. both those combos are used less than they're carried, but just like a first aid kit, are worth their weight, just for peace of mind.

-
On top of all those options for pocket carry, there's also a few tools that never leave home. These just sit on or near the desk, in case I need something special a regular multi can't provide, namely heavy duty shears, compound leverage pliers, or locking pliers. I don't actually have any dedicated tools to compete with those functions that these multitools provide.

-
So just like the other stuff I mentioned before, this all adds up to way more than I could possibly need, but dropping down lower than this, means taking some VERY tough decisions. I'd like to get this down further, probably to around half, but there's none of them I want to part with.
In time, it will dwindle, I'm sure. However, I need to wait for one of those Eureka moments, where I pick up a tool and ask myself "why do I still own this? I'll never use it". Maybe I ought to force myself to start carrying them all more, and see which ones I get sick of quickest.

-
A lot of tough decisions to make, but you seem to have made them for all the right reasons

-
Fixed blades are exactly the same too. Way more than I need, but none I can single out as wanting to part with.

-
@Smashie said:
A lot of tough decisions to make, but you seem to have made them for all the right reasons
Yes indeed. I have come a long way already, and obviously what all these picture's DON'T show, is just how many tools have already been moved on. They were the easy decisions, and these are FAR harder. From my perspective, this is the cream of the crop. However, I thought it might be of interest to some here, to show just what my top tool choices would be, if I was a little more active than I am today. This is probably less than a quarter of everything I've owned, and I haven't even touched on the keyring stuff yet.
I've gotten rid of Charges, Waves, Rebars, Core, ST300, Pulse, PST I & II, Juice, Fuse, Blast, Kick, Swisstool, Swissgrips, different Spirits, assorted SOGs, many many Gerbers, Bear Tools, CRKT offerings, and a load of other stuff I can't recall at the minute. This is the stuff that beat them all in terms of my own personal needs preferences. This is the stuff that saved the day countless times, be it at work, at play, or just helping friends and family through their life challenges. I appreciate much of this won't be to everyone's taste, and many would have gotten rid of these, and kept some of the other stuff instead, but for me this is all tried and tested tooling, and throughout the various little triumphs that i've had in life, this is the gear that did it :)
-
This discussion has made me realize.. are there any knifeless multi-tools that have outside facing tools? Seems like a quick deploy outside facing tool would be great.
-
@Happy Gilmore said:
This discussion has made me realize.. are there any knifeless multi-tools that have outside facing tools? Seems like a quick deploy outside facing tool would be great.There's small ones, like the knifeless version of the Dime and the Style PS. There's also the newer versions of the Sync that have just been announced. However, no "full sized" external access knifeless tools spring to mind.
-
@Happy Gilmore said:
This discussion has made me realize.. are there any knifeless multi-tools that have outside facing tools? Seems like a quick deploy outside facing tool would be great.
There's small ones, like the knifeless version of the Dime and the Style PS. There's also the newer versions of the Sync that have just been announced. However, no "full sized" external access knifeless tools spring to mind.
Maybe the P2 will be that tool, all I need to do is replace the blade with another tool.
Cheers,
HG -
Following on from before, here's part of the cluster of keyring sized items which are also part of the thinning out process. Why only part of them? Well, that will become clear in the next post or two.

-
Now we get to the fun bit, or at least, the fun bit for me. Weighing up one tool against another is all well and good, but that doesn't take into account the fact that I very rarely will only carry one pocket tool. As I mentioned before, the only one I might do that with is the Gerber Balance.
Most of the time, I'll have a combination of items, and as far as I'm concerned, combos are king. I find that it's how good a combo I can put together which dictates how frequently something gets carried, rather than how good individual items are. This is also how I was able to easily offload the stuff that went before taking these pictures without any sellers remorse. It wasn't just about an item not quite meeting my requirements, but about other tools building better combos.
The combos don't need to be large. The tool cluster on my keyring is a good example of that (Pic 1). A Gerber Dime, Utilikey and Nitecore tube. Some days this might be all I have. Other days, I might have the neck lanyard in the second picture, or I might have one of the trios from picture three. A good basic combo (for me) consists of scissors, knife, awl (or some form of general purpose pokey thing), pliers and Phillips. Not all combos need all of these, but it is the general template that I like to build around.
There's other "rules" too, such as making sure that if I'm carrying a locking blade tool, fixed blade, or a pocket clipped OHO folder, which some people might get the wrong impression from, I'll also have a low key traditional knife or other "people friendly" option, in case I need to use a blade in the midst of people who don't know me. But more on that later...



-
I do have some combos, which don't tend to get reached for, unless I'm doing a specific activity. For example, outdoorsy stuff is when the higher visibility stuff comes out to play.
The knifeless Fuse modification has two key shortages. A knife blade, and can/bottle openers. The Scout Jr handles both those roles easily. Also, whilst the Fuse has a custom awl which Eric (Metro) milled for me, there's also a good substantial awl on the knife, which is great for poking out stuff jammed in your boot tread, without either having to get the pliers tool out, or damaging the sharp edge on the custom awl. On top of all that, the knife can stay attached to me (along with a few other useful goodies) so it's unlikely to fall out of my pocket without me noticing. The kit can also be supplemented as required, if that little knife blade won't be up to the tasks I think I'm liable to encounter.
The lightweight version of all this, is the KF4 and Climber Small combo, again, most stuff I expect to encounter will be handles by the pocket knife, but I do have a small pliers tool with an assortment of useful functions should I need something that the 84mm Vic can't handle.
These two combos are hands down the best that I've come up with for the role. A great balance of size, weight and function. Easy to find should I drop it, or place it down to free my hand up for something, and therefore a good chance of them all making the journey back home with me.



-
I mentioned earlier, that the TurboDiesel resided in a "grab bag" for taking with me if I was visiting friends or family where odd jobs might need doing. I also grabbed this kit if someone was moving house, or there was some other activity where surprise jobs might arise. This kit has been a real day saver on many occasions.
Obviously the Diesel is knifeless, so the Boker XS takes care of that, as does the Swann Morton craft knife in the bottom right of the pic. The Soft Touch 14 is also on hand for when the XS might cause a stampede of unwanted questions. It also provides splinters, a better awl than the can opener on the Diesel (which does work very well as a scribe though), and as the can opener is BO coated, I won't use it for food, so the Wenger handles that too.
I also have the bit kit for the Diesel, and a couple of hacksaw blades which fit the blade carrier. The marking and measuring tools, plus the adjustable spanner and Knipex Cobra, round this kit off very nicely. I usually have some superglue and little tie wraps in there too, but they've been used and need replacing.
EDIT:
the Gerber Shard should have been in that picture too.
-
Not every combo is so rigidly defined. Some are more "mix and match". There's still a logic path of sorts though.
For example, if I fancy carrying a clipped folder, I need a "people friendly" option too, so that's either a traditional knife, or a Swiss knife with scissors. I see no benefit to carrying a Swiss knife WITHOUT scissors. I made that mistake on my first one, a Tourist, and that now lives in the kitchen drawer.
If I choose to pair the clipped folder with a traditional knife, or even forego the clipped folder and just carry a trad, I need a pliers tool with good enough scissors that I can get by without a Swissie. The top two choices here, are the MP400 modification, and the Balance. I may however go for the knifeless Wave instead, should I want a more heavily loaded toolset. The Balance does have its own non-locking sub 3" blade, but it's not the world's greatest, to be honest. Adding another plain edge blade gives me the option of serrations or not, but the Balance blade is people friendly enough that I can choose to carry it on its own, or add EITHER a clipped blade or traditional. I don't really need both like I do if I carry a clipped folder with the MP400. If I chose to, I can omit the clipped folder, and still have a good urban carry setup with either tool.
If however, I choose to go the Swiss knife route, a Sideclip or the knifeless Octane, provides both Phillips and pliers in a slim package, so I don't need a knife with inline Phillips. This gives me the choice of a wood or stainless Wenger Traveler, Salesman, the Sheepsfoot Duke, or the Original Outdoorsman, which not only adds a saw and file, but serrated and pruner blades too. Of course, I can forego the clipped folder here too, and still have a great urban pairing.


-
I really enjoyed the posts, thoughts and pics in here!

Totally agree with you on the Diesel, and this:@AimlessWanderer said:
On top of all those options for pocket carry, there's also a few tools that never leave home. These just sit on or near the desk, in case I need something special a regular multi can't provide, namely heavy duty shears, compound leverage pliers, or locking pliers. I don't actually have any dedicated tools to compete with those functions that these multitools provide.this applies to me and my tools as well,

-
@ThePeacent said:
I really enjoyed the posts, thoughts and pics in here!

Totally agree with you on the Diesel, and this:On top of all those options for pocket carry, there's also a few tools that never leave home. These just sit on or near the desk, in case I need something special a regular multi can't provide, namely heavy duty shears, compound leverage pliers, or locking pliers. I don't actually have any dedicated tools to compete with those functions that these multitools provide.
this applies to me and my tools as well,

Thanks TP
It's useful for me to "think out loud" like this, and good to know others enjoy following along :) -
What I find interesting is, no matter how many times we begin the "process" we will always tend to have more than we "need". I try to stay away from the "need" perspective. Reason being, simply because I like certain tools regardless if they are used, seldom used, or not used at all
. YMMV as each of us knows what works best for ourselves.Unlike the long standing myth of Crows collecting shiny things, we however as humans do. Its just that way and I'm a lot better at accepting it. That being said, I've gone thru many of my tools and culled quite a lot. I go thru periods of separating the tools I feel I no longer "need" and place them aside for further analysis. A few tools continue on their way to new homes and new owners while many return to their dark resting place :D.
I'm am thankful to not have been so hasty with some tools. I also make it a point as you allude to, to put certain tools into use to get a clearer understanding of that tool or as you state "Maybe I ought to force myself to start carrying them all more, and see which ones I get sick of quickest." My Skeletool CX is such a tool. I am glad I just put it aside and let enough time pass to try again. My Charge TTi is another.
I am not hesitant to assign a tool a purpose even if that purpose on the surface is lowly ;). I don't currently have a bathroom drain tool, YET
. I have tools parceled about my home. I have them on my coffee table, in my shed, garage, kitchen drawer, hall closet, small tool box, vehicle, evacuation bag, and other places. These are tools that are good tools just not tools I want to carry. This is yet another distinction I tend to make when deciding a tools fate. Just because I don't want to carry it doesn't mean its time to go.I really like this thread.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login