3D Printer Blog
-
I am thinking of getting into 3D printing. Part of the push is that I can 3D print parts for my Thermaltake P3 case. I thought that was ultra cool...but I do not have anyway of doing this at home.
So i have done a little bit of research and am thinking of possibly getting into 3D printing.
I was at first attracted to the Photon type printers...but have read that dealing with the liquid resin is a horror show, not to mention the health aspects of the resin itself. I also read the post process cleaning is a real bear requiring rubbing alcohol. I was attracted at the quality, but the print size appears to be very small in the lower end printers. I do not want to spend a fortune on this. i am still unsure how often I would use one.
This leads to the filament type printers. Does anyone have any experience that they could pass down to me? Which printer is ok...I am thinking a fairly low budget model would be good for starters. So I have started to look a little on Amazon.ca.
This one is cheap...a Labists X1
I also like this one, a JGAurora A3S
I am a bit more attracted to the second because it is priced in my budget and is a bit larger print size...both are orange. I like the industrial look of both.
Any suggestions, tips, knowledge, etc I am going to research the hell out of this before I move any further.
-
This was a very helpful starting info point in my own research (which didn't pan out because priorities :D ):
https://m.all3dp.com/1/best-3d-printer-reviews-top-3d-printers-home-3-d-printer-3d/ -
That link was helpful.
After hours of reading reviews and looking at value and capability, I just bought off of Amazon a Creality Ender 3X 3D printer.
I was very tempted to get an Anycubic Mega Zero 3d printer because it had a 90 dollar off coupon. It has a build volume of 220x220x250mm which was the size I was aiming for. Then I found out it does not come with a heated platform. After reading reviews, it seems that a heated bed is preferred. I also read that the included brick was anemic and got very hot during operation. I was still tempted because of that coupon.
Then I found the Creality Ender 3,which also has a build volume of 220x220x250mm. However this one features a heated platform, and for about the same price as the above printer with coupon, I am getting the 3X version which features a removable tempered glass plate, improved extruder, and 5 extra nozzles. After reading reviews, the Ender 3 appears to be a very nice machine. It certainly has a lot of community support, Now all I have to do is wait for it to come in...expected mid May...possibly longer with all of the Covid 19 affects on the shipping channels.
-
Only saw this now (late to the party as ever
)I bought my 3D printer about 5 years ago, a Conrad Renkforce RF1000. At the time it had a reasonable following and support in the German speaking countries, and very little outside these. The follow up products were less well supported and not so successful. I still occasionally use it, but it has never become my main hobby and I haven't followed more recent developments in detail. It still works - it is built like a tank, using mainly aluminium and steel sheeting. The main factor that stops me from using it more is the effort in designing the parts - little experience with CAD tools and too little time to add to it.
I'm glad you went for one with a heated bed, as this is generally considered essential for printing warp prone materials like ABS. You'll probably als need a full enclosure for the same reason - I haven't visited your link yet (typing this on the phone) but I hope yours has it or is prepared for it.
Hope it arrives soon - and good luck with your projects!
-

Can't wait for pics. -
Been contemplating one myself for quite some time... Things stopping me from buying one at the moment:
I know I will be returning to Paris eventually, and it won't likely be something I can stuff into my already overflowing suitcase. So it would join my plotter in the abandoned toy dept here in Spain.
Also, been doing my best to not order anything that is not essential online for delivery, so I have not actually ordered anything since this mess started. If I can't get it locally, I don't really need it at the moment.
Given my electronics background, ideally I want one that can be modded, has lots of support and extras available.
I am also still keen on the idea of a multipurpose machine that will plot, cut, print, cnc, laser... along the lines of these: https://all3dp.com/1/all-in-one-laser-3d-printer-scanner-cutter-engraver-cnc/
-
That looks like a very neat machine Dutch_Tooler.
Whoey, I have wanted one for the past 10 years but never could see the need for one, that is until I noticed that my Thermaltake P series case has a lot of useful parts that you could make for it, but couldn't buy online. I still know nothing about them, and will be happy to learn once I get the unit in. What I know, the prices have come way down since last I looked into it years ago.
I just hope I don't get into the deep end too quick. I hear the learning curve is steep enough as is.

-
This video nudged me towards the Creality Ender 3X.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
I found this awesome how to build and use the included software of the Ender 3.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
This has put my mind at ease quite a lot. I am going to look at this a few more times in the coming week and during the build. I am getting more and more excited for its arrival.
I also found this interesting link about upgrading the printer with some 3D part prints. This looks kinda cool...and I can see this being some of my first parts printed. Not sure what parts are upgraded with the 3X versus the 3, so maybe some of the extruder parts I may not need to upgrade. Only time will tell.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Now all I need to do is buy some filament for the printer. Not sure if I can locate a local source, or buying off of Amazon will be my best choice. More research.

-

Does the printer include a starter supply of filament? -
Yes it does.
-
My recommendation would be to get something with an auto bed leveling function on it. I have two 3D printers now and they are both a pain in the arse to level the bed properly before each print.
Uneven beds are also the number one cause of catastrophic misprints, and I have the messed up projects to prove it.

For the record, I have the aNet a8 printer, which is a fantastic machine if you want to learn how a printer works, make modifications and end up with a collection of replaced, cheap parts that don't work or don't work well. Virtually every part if the kit is replaceable and upgradeable, and as well you can print upgrade parts on it- if you can get it working in the first place.
The other unit I have is a Monoprice MP Select V2, which is nice, but you can only print very small things with it, you have limited access to the small bed for leveling, the USB port in it comes pre-non-functional from the factory and you have to find an old school micro SD card for it because it won't take SDHC.
Def
-
I looked at that, and everything with an auto bed leveling function was out of my price range. I am still not sure if I will like this or not. The Ender 3X was about as much as I was prepared to pay for a starter machine. I wanted something that could possibly print a 120mm-140mm fan shroud for a computer.
I do see there is an auto leveling upgrade for around 100 bucks for the Ender 3 on Amazon. That could be a possible upgrade down the road. I also see they are selling a whisper quiet motherboard for it as well...just how loud is this printer?
-
I got two 3D printers, a BCN3D Sigma and a Anycubic Photon resin printer. Of those two the Photon is the most used by far simply because of the much higher resolution and because it gets good result first time and every time. Filament printers like the BCN have a lot more settings to get right for each material, and it can be a lot of hassle to chase down the right settings. Once you have the material down they are fine too though.
Resin printers have a reputation for bad smell and possibly dangerous chemicals. That is somewhat true, but depending on material filament printers have some of the same issues. I don't really care though as they are in their own room with ventilation anyway.
As for resin cleanup that isn't really so messy as it is stinky. I have a gas mask so I just use that, and that kind of solves that issue totally. It is a bit of work though that you don't have to do with filament printers. Simple working gas masks can be had for very little these days. (Well, maybe not these days but normal days).
Overall though the resin printer is used a lot more than the filament one so for me at least the preference is clear. It might be mentioned that neither of these printers are projects but ready to go printers.
-
I looked up the price on that BCN3D printer! :ahhh
I would think you would have to be very serious to get one of those. I am just dipping my toes into this to see if I can get along with the technology. If I like it, and get fairly good results with the Creality Ender 3X, maybe I might see myself getting into resin printers down the road.
I also looked up that aNET a8. I would think building that might be beyond my skill level Def. That is a full on kit. The Ender 3X is a partial build. Nothing crazy like that.
-
@Chako said:
I looked up the price on that BCN3D printer! :ahhhWow. They used to a fair bit less than the price these days. (Not that it was ever really an inexpensive option - but it was one made to plug and play).
@Chako said:
I would think you would have to be very serious to get one of those.Work related so I'd say serious enough. It provides some extra options for making parts, prototypes or fixtures locally. Usually in combination with other processes though.
-
I just gotta stick my nose in this subject to see what’s going on, I’d love one but really have no reason for one, I mean besides having that custom forming tool made, but other then that idk what I would make? Let alone come up with the $$ for one of those things dang!
JR -
@MadPlumbarian said:
.. I’d love one but really have no reason for one, I mean besides having that custom forming tool made, but other then that idk what I would make?I've actually wondered about the same? What do most people make with these printers? I think that for many the 3D printer and technology in itself might be the project?
-
I hear you. I don't really see a need for one either...but that never stopped me from wanting one for a decade now. Bidding my time for prices to come down and the technology to mature. If I was in the US, I would have had one ages ago. Canadian prices tend to tack on $100+ over US prices. That means the Ender 3 is 200 US, but 300 Canadian. I know I want to print a piece or two for my Thermaltake P3 computer case. Thinking mostly of adding another fan to blow air across the VRMs. You can print a fan holder that will attach to the glass mount holders. After that, not sure, other than to experiment and hopefully get some new skills (thinking something along the lines of CAD to possibly make new things if I get that far). This could translate into something I can use for my classroom in terms of a new skill or something..
I also wanted to say I just bought 2 1Kg rolls of PLA filament, a red and black. Thinking the red would do nicely with the red computer case. Just got to wait for it from Amazon.
-
@Chako said:
After that, not sure, other than to experiment and hopefully get some new skills.I've bought and tried many things over the years for those exact reasons so that makes plenty of sense.

If BCN ever comes around to making a ceramic nozzle for the Sigma I might get one to try for the same reasons. I would make the worst ceramic ever, but I'd call it art and give orrible xmas gifts to everyone! :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login