Lets get posting! v2
-
So today out of randomness; I decided to get all experimental and test some Rivnuts.
The test here is aluminum rivnuts vs. stainless steel rivnuts and involves two things:
- how aluminum rivnuts reacts to stainless bolts
- how they both stand up to the elements.
So here’s what I have done:
I have taken two brackets of unknown metal and riveted them in place and put a stainless steel bolt through them. Then zip tied them to the back of an outdoor lamp where I will leave them.



I have put a reminder in my calendar to check on them every month and see how they stand up to the elements.
I have seen enough YouTube videos / comments and forum posts about how aluminum and stainless don’t mix and different opinions on how they hold up to the elements. But this is my test and what I will observe / conclude / take away from it, will be how all the above holds up in my specific country, with the rivnuts / bolts that I have and I won’t let anyone tell me otherwise.
I have no idea about what type / grade of stainless steel or aluminum these consist of, the results will simply be my conclusion of how well they work.
There will be no mathematical or in-depth scientific analysis of this, just simple observation.
The bolts are hand tightened and held in with loctite / threadlocker, to simulate how they would used IRL.
Sent from my iPhone using Tapatalk
-
The aluminum rivnut test bracket has actually more going on.
Top bolt: has exposed threads sticking out in the back and is not held in with threadlocker
Middle & button: are both held in with threadlocker and don’t have their threads sticking out at the end. The difference here are that one is a round head HEX bolt and the other is a Flat head HEX bolt (both stainless steel) so this will test how they both hold up.

Again: threadlocker was used only to simulate real world applications and see how it will hold up.
Sent from my iPhone using Tapatalk
-
I don’t expect to see anything really happening with the Stainless steel bolt on stainless steel rivnut, so that’s why there’s only one used.
I can imagine if anything will happen; it will be on the Stainless steel on aluminum rivnuts bracket.
So the stainless steel bolt on stainless steel rivnut will mainly just be for comparison.
If however; I see some drastic changes on the stainless steel bolt on stainless steel rivnut bracket, then I will do a full test of that equivalent to the stainless steel bolt on aluminum rivnuts bracket
Sent from my iPhone using Tapatalk
-

Sent from my iPhone using Tapatalk
-
Stainless steel and aluminium together
make some sort of chemical reaction
And the two get stuck together after a long period
The only way you can prevent this is by
using some copper grease on the threads
I have had plenty of problems with this on motorbike
engine cases where I have had to drill the bolts out >:( -
@Wspeed said:
Stainless steel and aluminium together
make some sort of chemical reaction
And the two get stuck together after a long period
The only way you can prevent this is by
using some copper grease on the threads
I have had plenty of problems with this on motorbike
engine cases where I have had to drill the bolts out >:(Gotta love galvanic corrosion!
-
Is that what it’s called

I always hate having to work on motorbikes
that have stainless steel bolts on engine cases
As it’s not easy drilling out snapped
stainless bolts on soft aluminium cases >:( -
Finally finished hanging up the mirror unit
And apart from drilling the holes in the wall
For the wall plugs I only used the PocketCrunch

-
I will try and remember to take some pics of
the bathroom when everything has been done
It’s only a small bathroom but I will see what I can do
-
Got one more display unit to build and
hang on the wall of the bathroom tomorrow
Then we are nearly done apart from some
small stuff that still has to go on the walls -
Not much on the tv tonight ???
Got hundreds of channels and still nothing good to watch
Thank smurf I have the internet to look
on otherwise I would be so bored by now :ahhh -
I would be totally lost without MTO to keep me busy

-
Especially in the evening at least during
the day I have other things I can do
But in the evening just sitting on the sofa
I would be driving myself totally nuts -
Trying to look for some peening punches
But I can only find flat punches
I am after hollow domed punches
For peening brass pins on a SAK
-
I will have another look for some tomorrow
-
I can’t concentrate on much tonight >:(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

