EDC in DEC
-

Office day - 1st since late August.
The Wine Master and lucky charm roaring to call it a day..Sent from my iPhone using Tapatalk
-
Another great start to the day, guys!
I'mm curious to see how long those duct tape wheels hold up. Duct tape is surprising stuff.

-
@comis said:
Kinda curious if Fisher got to pick his EDC, what would those be?(I'm sure the pliers is one of them) :DThe pliers would definitely be one. Especially with bullies, if I haven’t put them on and the bully gets short he will bring it to me.
He would also want scissors for cutting tags off toys and opening treats. Knife blade for cutting treats. If the knife isn’t a serrated blade, then a saw, for trimming old end of partially chewed treats. He likes my water bottle with boot as bowl, but at minimum his collapsible bowl for water. Of course poop bags and treats are a necessity.
That would probably be sufficient for edc. But his travel brush might also be included because he likes being brushed if up tight or anxious.
-
Day 7
Decided to switch out my tools. I am aware that this will disqualify me for the badge, but that is ok. My main reason to attend this challenge was to figure out what works for me, so i don‘t see the point continuing with tools that I can already tell are not working.
If that is ok with you folks i will continue to post though to see if the new tools work better.
These two get replaced:

I liked the idea of the Handyman because it has all the tools i want in the smallest package possible. However this is also the biggest flaw.
One thing I ask of my MT‘s is the ability to handle all sorts of screws (especially Philips) without issues. The Handyman was lagging in that regard. The can opener is not mounted close to the middle, making it harder to use. Compared to the Alox tools or 3D Philips drivers it is also too weak. The same goes for the majority of the backside tools, making me not want to use them. Just way too much stuff I dislike to enjoy carrying this tool.On a good note: The pliers performed way better than expected, and I really used them more than i thought

Due to above reasons I decided to switch to the Pioneer and my modified MP400. This gives me plenty of screwdrivers, from the can opener tip, over the 3D Philips on the MP to the awesome flat driver of the Pioneer. The tools still provide pliers, wood saw, metal saw, and file.


Slight adjustments to the bits I carry. Added a #0 Philips (for some reason i grabbed a lot of small philips screws lately
) and moved the micro screwdriver to the bit holder since I lost the corkscrew.
Tools of the MP400 -
@SirVicaLot said:
Day 7Decided to switch out my tools. I am aware that this will disqualify me for the badge, but that is ok. My main reason to attend this challenge was to figure out what works for me, so i don‘t see the point continuing with tools that I can already tell are not working.
If that is ok with you folks i will continue to post though to see if the new tools work better.
These two get replaced:

I liked the idea of the Handyman because it has all the tools i want in the smallest package possible. However this is also the biggest flaw.
One thing I ask of my MT‘s is the ability to handle all sorts of screws (especially Philips) without issues. The Handyman was lagging in that regard. The can opener is not mounted close to the middle, making it harder to use. Compared to the Alox tools or 3D Philips drivers it is also too weak. The same goes for the majority of the backside tools, making me not want to use them. Just way too much stuff I dislike to enjoy carrying this tool.On a good note: The pliers performed way better than expected, and I really used them more than i thought

Due to above reasons I decided to switch to the Pioneer and my modified MP400. This gives me plenty of screwdrivers, from the can opener tip, over the 3D Philips on the MP to the awesome flat driver of the Pioneer. The tools still provide pliers, wood saw, metal saw, and file.


Slight adjustments to the bits I carry. Added a #0 Philips (for some reason i grabbed a lot of small philips screws lately
) and moved the micro screwdriver to the bit holder since I lost the corkscrew.
Tools of the MP400Nice choice of tools Sir Vic
Enviado de meu moto g(6) usando o Tapatalk
-
Today, a coffee before go to the daily chores...
And the Ranger file helped me to make a copy of a window key using a old rusty key with similar profile. And... It worked!
I really love the Victorinox file (and combo tool).
My most loved SAK is the Trail Guide. (But for this challenge I choose the Ranger who is everyday in my backpack)



Enviado de meu moto g(6) usando o Tapatalk
-
-
@SirVicaLot said:
Day 7Decided to switch out my tools. I am aware that this will disqualify me for the badge, but that is ok.
...
... please keep posting with your new setup

-
day 7: started working out again. used the Spirit to open some fresh chalk.
<a href="https://flic.kr/p/2ketVCf" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50692034002_b45b66ba4a_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>2020-12-07_07-23-17
-
@Hevy (CT-782) said:
Today, a coffee before go to the daily chores...And the Ranger file helped me to make a copy of a window key using a old rusty key with similar profile. And... It worked!
...Nice

-
@styx said:
day 7: started working out again. used the Spirit to open some fresh chalk.<a href="https://flic.kr/p/2ketVCf" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50692034002_b45b66ba4a_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>2020-12-07_07-23-17
You've got some balls :o
-
@McStitchy said:
Love the pliers solution for Fisher
Thanks
-
Day 07
Lit a candle with the Zippo.
The Spirit and Flashlight caddy is working great.
And I've figured a new function for the orange peeler of the Executive



-
@McStitchy said:
You've got some balls :o
I feel like someone should be coming along any minute with a certain gif. -
The scissors in my SOG PPP trimmed a broken fingernail.
The boker plus minipry cut a tag on a T-shirt
<a href="https://flic.kr/p/2kerhqD" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50691518637_9773d3f5aa_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_20201207_165932 by [url=https://www.flickr.com/photos/138056053@N03/] -
Day 7: No balls today, but I did put the Spirit's caplifter to use. Yes, it's a twist off cap, but I gotta have some fun 🍻

-
@Barry Rowland said:
Day 7: No balls today, but I did put the Spirit's caplifter to use. Yes, it's a twist off cap, but I gotta have some fun 🍻I like your style Barry

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

