Daredevil Challenge 2021
-
@Sos24 said:
Day 30

After a month of carrying and using, my opinion of the Minimaster hasn’t really changed. It is not a bad tool, but there are just better options out there.The Minimaster also has to flaws that are common in lots of tools but iritate me nonetheless -
- having to open something to access the tool you want vice just opening the tool you want
- tool clumping - I can’t stand when I’m trying to access one tool and multiple open.
I also realized the Minimaster missed on a few things that just don’t make a lot of sense to me
- File and Phillips only being one sided. This makes them less functional for no reason.
- Then wrench holes did not include a 1/4in that could have been used for bits. This one change would have increased functionality a lot.
Thanks for being part of the challenge, and the good write up!

I think I have now read the majority of the review/summary of the challenge participants, and save Alan who seem to find his new love for MP600, most folks have seemed to taken a 'neutral' view on their tools. I don't know whether it is same sentiment right from the start, and whether being indifference is better or worse than hating the tool. But secretly I do wish all the tool designers would do the same challenge, even just for a week or two, to get real world feedback instead of relying on intuition or computer designs.
@Poncho65 said:
I am finally at a computer instead of a phone and can see who has badges and who doesn't
:DBadges awarded to SteveP and Adam5

Congrats to everyone that has the badge
and if you still lack it, just go and request it and we will get to you as soon as we can 
Thanks Steve and Poncho helping us with the badges and rewarding them.

-
@Alan K. said:
Pretty sure I won't need therapy although this month has been emotional. I could probably use a hug. Thanks to all who participated. It was interesting seeing so many different tools that most of us wouldn't normally chose to carry. A big thank you to Comis for creating this challenge and getting it started and to SteveC and Poncho for issuing badges to everyone.


-
@Adam5 said:
I would like to say that I thoroughly enjoyed this challenge. Not so much the MT I carried (though it could have been much worse), but I definitely enjoyed interacting with all of you
Thank you for the pleasurable experience
And now, if Poncho does not mind:

Well said. It was fun to see the daily challenges that participants had with their tools of choice. It also saved me a lot of money, because I don't want any of the MTs chosen.

Thanks again, Comis!
-
More badges awarded this am.

-
Thanks Steve
a bit more on it than myself 
No work today because of Tropical Storm Ida :ahhh lots of rain :ahhh
Congrats again to everyone

-
thanks Steve, hope you’re not too badly affected by the storm Poncho, looked terrible on the news 
-
We weren't affected badly at all here at home
just to much rain to work today :D -
Day 31
Bonus Picture!
Wearing yesterday's shorts with the MP600 still on my belt, so it got one more use before going back in storage.
The bottle opener works very well.
-
The end


Pliers:
The pliers are needlenose (I think I erronously stated that they were blunt nose in a previous post) combination pliers with bypass wire cutters. The pliers open farther than most other MTs, allowing it to engage larger diameter nuts. However, the wire cutting edges are not beveled as with typical bypass cutters. While this may allow the MT to withstand cutting harder materials (it lacks a hard wire cutting notch), that means it actually shears materials in two, often with a sudden snap as the material fails due to the shear force. In other words, it does not cut materials smoothly. Also, the lack of sharp cutting edges allows the material to be pushed foward while closing the pliers. Sharp edges would penetrate into the material and grab it. It is especially aggravating when trying to cut Romex cable.Handles
The handles are close together, making the tool feel compact in hand. They are just far enough apart that I did not pinch myself badly, even when the handles snapped shut while cutting wire. But they could be anoth centimeter farther apart in my opinion. Also, the closeness of the handles hindered me somewhat while trying to manipulate small items. But the closeness became an advantage while working with larger diameter items.The handle also featured a 1/4" bit holder with magnet. I had no difficulties driving screws with the MT.
Finally, one of the handles has a L shaped tab that serves to lock the tools in place when closed. There is no danger of having a blade close on you if used properly.
Drywall saw
Utter smurf unless you only need to cut straight lines that you started with another saw or knife blade.Awl/reamer
Robust, works well starting holes in wood. Was able to make a hole in a PVC conduit. Probably can be used as a conduit reamer.Serrated blade
Sheepsfoot shape. Cuts well enough.Plain edge blade
Clip point. Sharp edge and point. Tends to ride out along with file, which has caused me to lose a little blood a couple of times.File
The star of this MT in my opinion. Multipurpose, with two file sides, a chisel-ground scraper edge, and wire stripper notches that actually work well.Overall impression
Robust tool. Not as easy to manipulate as other MTs. As a tool marketed to electricians, it has one major selling point (the multipurpose file) and two major drawbacks (bad drywall saw, poor wire cutting ability).Can I go back to my Super Tool now?
A late congratulation on the new badge and finishing!

It is my first time seeing a Klein tools MT up close and personal, and I have this biased view that L shape handle and the closeness of it will no doubt give some one the worst blood blister of the century. Turns out it is not the case, and actually I think it is a passable tool as it is. I don't know what an optimal drywall saw would look like, but that wire cutter surely is a fail for electrician. Great writeup!
Btw, this maybe a little too early to write, but I hope someday the young little one will find this thread when he joins MTO, and wouldn't it be great if he too could do a challenge here sometime?(probably not with his current tool set). :D
-
@comis said:
A late congratulation on the new badge and finishing!
Thanks! I am happy I took part in the challenge. Thank you for organizing it

It is my first time seeing a Klein tools MT up close and personal, and I have this biased view that L shape handle and the closeness of it will no doubt give some one the worst blood blister of the century. Turns out it is not the case, and actually I think it is a passable tool as it is. I don't know what an optimal drywall saw would look like, but that wire cutter surely is a fail for electrician. Great writeup!
A drywall saw should have a tapered tip so that one can penetrate the drywall to begin the cut. Also, it is helpful if the teeth are formed in such a way that allows cutting on the push and pull strokes. Here is an example of a typical drywall saw:

The Klein saw has neither of these attributes:

Btw, this maybe a little too early to write, but I hope someday the young little one will find this thread when he joins MTO, and wouldn't it be great if he too could do a challenge here sometime?(probably not with his current tool set). :D
I would love it if my grandson eventually joined MTO and participated in a challenge :D
He is about the same age as your son (4 years old), so I guess it will be a few years before either of them can participate. -
@Adam5 said:
Thanks! I am happy I took part in the challenge. Thank you for organizing it
A drywall saw should have a tapered tip so that one can penetrate the drywall to begin the cut. Also, it is helpful if the teeth are formed in such a way that allows cutting on the push and pull strokes. Here is an example of a typical drywall saw:

The Klein saw has neither of these attributes:

I would love it if my grandson eventually joined MTO and participated in a challenge :D
He is about the same age as your son (4 years old), so I guess it will be a few years before either of them can participate.Pleasure is all mine, and thanks for the pix on drywall saw, I'd learnt something new today.
Mine is 2 this year, and I look forward to that day he could join us.

-
A shout-out to Echotech...
This afternoon I'm poking around at an estate sale and what do it find? Hammerhead's cousin!
$6 US, with belt pouch.
I'm now the proud owner. :D

-
Is this the beginning of the Hammerhead Challenge? :ahhh
-
@ReamerPunch said:
Is this the beginning of the Hammerhead Challenge? :ahhhThat's not a challenge, it's a permanent lifestyle change :ahhh
-
@ReamerPunch said:
Is this the beginning of the Hammerhead Challenge? :ahhh@GearedForwards said:
That's not a challenge, it's a permanent lifestyle change :ahhh- Echotech
- SteveP
Who else is going to join the club? :ahhh
-

The badge will be awlsome
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
