Daredevil Challenge 2021
-
@comis said:
I kinda look forward to your list by the end of this, personally, I love my swisschamp and that love carries over to its relative from Delemont.
I miss my Swiss Champ already. :( I'm planning to piggyback on the end of the Go BIG Challenge next month with it.
We'll see what the month brings for the S557. It just needs to sell me on the usefulness of the wrench.
-
@Poncho65 said:
Nice to have a 1/4 inch bit driver even if the magnet has a chance to be messed up

@Alan K. said:
Comis, I hang my Brisa EnZo necker 70 from my belt at the 5 O'clock position with the sheath going into my back pocket. This keeps it unobtrusive and prevents it getting caught on anything, but mine came with the leather sheath. I added a dangler so it sits deeper and just the end of the knife sticks out of the pocket. I'd also suggest looking into the KSF pocket sheath.
Alan, thanks for the suggestion and I will love into KSF for different alternatives.

Btw, if you like Necker70, I would really encourage to consider this bobtail sometime in the future. FFG on this knife is slicey, and the short handle fits the hand even better than necker. The kydex offers a very positive click-in feedback which is great.
@Alan K. said:
Day 02
When I decided to get an MP600 I had to make sure I got one that came with scissors. Most of them do not. So, I ended up getting the MP600 Pro-Scout model. One of the selling features for me was that it comes with a blade exchanger similar to that on the Leatherman Surge for the saw blade, and the RemGrit blade it comes with is supposed to cut through anything. I thought that was a very cool idea. Unfortunately, it doesn't really cut anything. Instead, it abrades through the material and requires considerable effort to do so. Definitely not in the same category as the Victorinox saws I'm used to.

That's a slight bummer, I kept looking at that saw when I was considering carry that tool, thinking how well does it do, now I kinda know.

-
<u>DAY 2</u>
Not a very exciting day today, so no real use

I considered how large & bulky the OHT is & took a shot of it with the palm trees in the garden


-
-
-
@Fireman said:
Daredevil Day 2: If the knife is the most commonly used tool, it requires you to be a bit of a daredevil. The slot in the blade that makes it one handed doesn't equal a Spyderco. It would be fairly easy to run your thumb down the edge if you aren't careful. The lock works very well and the blade was sharp out of the box.

I feel your pain there Fireman
I picked up my Gerber Armbar (Slim-Drive) a few days ago & it's the same issue (sliced fingernails) ::)
-
-
@Alan K. said:
Day 02
When I decided to get an MP600 I had to make sure I got one that came with scissors. Most of them do not. So, I ended up getting the MP600 Pro-Scout model. One of the selling features for me was that it comes with a blade exchanger similar to that on the Leatherman Surge for the saw blade, and the RemGrit blade it comes with is supposed to cut through anything. I thought that was a very cool idea. Unfortunately, it doesn't really cut anything. Instead, it abrades through the material and requires considerable effort to do so. Definitely not in the same category as the Victorinox saws I'm used to.

I was very disappointed in the Remgrit blade. Although, as Poncho mentioned, at least you can purchase better jigsaw blades for it.
-

Trying to see how a short fixed blade could be fitted onto a cargo pants, one good thing about the Wetols is the ability to take on regular hex bit. The magnets at the end directly contacts the bit end, and probably will be crushed over time.
A thought I’ve had regarding cargo pocket carry is a thin flexible molle panel sized to the pocket. I got the idea from Raven Concealment. This would allow attaching various tools interchangeably, but keep all in a easy grip orientation. I just haven’t found the right material at the right pr

@comis said:
Fisher is one lucky dog, I remembered you had been fine tuning the harness for him more than once. And popsicle! I need one!
This is a new style one. Instead of being all paracord, it has a front panel with pocket for a cooling pack if desired during the hot summer.

-
Day 2
<a href="https://flic.kr/p/2meQLqN" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51352457182_882abb619c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>2021-08-02_09-47-01 by Humayd a r Mahomedy, on Flickr
i did not get any use today,i was hoping i can be a bit more "tool active" on this challenge ::)
pic is of the notched file,which has seen some use.
i'm notch certain if that's a burn from a live wire
-
Day 2
The Minimaster blade helped cut some fat wood for making coffee on my twig stove. The knife and slot driver also helped change the air filter.


-
Currently watching Beverley Hills Cop 3

Can I swap for the Annihilator 2000 I feel it suits my current needs better...

-
@comis said:
Is the opening hole well chamfered like the Victorinox 111mm? Maybe by the end of the challenge, you could do a mod to rough up the opening hole slightly, and it may make the opening a bit easier?
It's not like a 111mm in smoothness of opening or hole chamfer. The pivot could do with a lot of smoothing out. I'll try the lazy man's solution first (oil). If I get amitious I'll take it apart and have a look at what's going on in the pivot.
-
I experienced two things this afternoon: one of the implements failed to perform a job properly and then the MT almost sufferred mechanical failure.
First, I tried using the saw and it failed miserably. I was installing sconce light fixtures in a bathroom and had to cut out holes for the support boxes. My hole saw is 3-1/2" (about 8.9 cm) in diameter, the support boxes are 3-5/8" (about 9.2 cm) in diameter. Normally this difference presents no problem. The hole saw tends to cut a slightly larger hole in drywall which receives the box with no trouble. However, these walls had shiplap installed. The holes were slightly too small. I needed to cut out a bit of the shiplap along the perimeter so the boxes would fit. So I tried to use the TripSaver saw.

The saw blade is basically a flat piece of metal with backward facing saw teeth cut into it. The teeth are not offset. Try I as I might, I could not get the saw to bite into the shiplap. I had to pull out my Multiforce knife, which has a saw much like the Wave's saw, to get the job done.Later, I pulled the MT out and one of the pivot screws for the plier head fell out. It does not appear to have any threadlock installed. I really was not expecting that. Fortunately, the screw was not lost and I reinstalled it.
-
Day 2: pried open an old tin with the screwdriver.

-
Not a very exciting day today, so no real use

I considered how large & bulky the OHT is & took a shot of it with the palm trees in the garden

Baby Palm tree! That thing is going to be gigantic when it all grow up.

@Sos24 said:
A thought I’ve had regarding cargo pocket carry is a thin flexible molle panel sized to the pocket. I got the idea from Raven Concealment. This would allow attaching various tools interchangeably, but keep all in a easy grip orientation. I just haven’t found the right material at the right pr

This is a new style one. Instead of being all paracord, it has a front panel with pocket for a cooling pack if desired during the hot summer.

That molle panel is a pretty decent idea, I think I would like it even more when it could be loaded onto a backpack or slingbag. I used to make an oversimplified pocket organizer with kydex, but the issue with that is weight and the imprint. My absolute ideal organizer is to have many pockets to fit whatever tool I want in it.
A cool pack in a paracord dog harness? That's really well thought out, and definitely marketable!

@SurgeUk said:
Currently watching Beverley Hills Cop 3
Can I swap for the Annihilator 2000 I feel it suits my current needs better...

Why I don't recall this at all? But in terms of EDCing Annihilator 2000 on a daily basis, yes, yes, yes!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

I can see how that would end badly/painfully 

