Mad Max Challenge
-
@Reinier said:
Not sure if serious... but I thought the blades were not sharpened?That's a good question, I used to read that on SAKwiki, but in fact, all the blades(13 if I have counted correctly) are all sharpened. Maybe it varies from Giant to Giant?

FB, could you please check are all the blades on your Giant sharpened too?

-
@Simon_Templar said:
That hat looks scared...Probably for good reason. >:D
Had to put something under the chair. It was too loud when I moved it.
Good use! I live in an apartment building, and can always appreciate neighbors that would do that, so I won't hear every chair pull in the middle of the night.

@SDDToolCo said:
You and the Giant did a great job!

@SDDToolCo said:
Day 27I have seen videos using the corkscrew to untie knots, I thought I would give it a whirl due to a very tough knot in my boot laces, eventually I got it but I did find it much more difficult then what I have seen, possibly because the knot was very tight

Hmmm...but youtube reviewers always have a way to try to 'look good' in front of the camera, so it's probably never as easy as it's seen. But I think the point maybe was to use the pointy part to loosen different part of the knob little by little, just enough to get the process going?

-
Even Neil (I miss him!) said the blades are not sharpened: /post/438008
-
@SDDToolCo said:
Day 27I have seen videos using the corkscrew to untie knots, I thought I would give it a whirl due to a very tough knot in my boot laces, eventually I got it but I did find it much more difficult then what I have seen, possibly because the knot was very tight

I did it a few times, worked ok for me. You have to keep your expectations in check though. It's not as if the knot will just fall apart at the touch of the corkscrew. After screwing it in, you have to tug and wobble quite a bit before a tight knot will give in. Still a lot better then doing it with your fingers, at least in my opinion.
-
@SDDToolCo said:
Love that file!Thanks SDD!

-
@SDDToolCo said:
Day 27I have seen videos using the corkscrew to untie knots, I thought I would give it a whirl due to a very tough knot in my boot laces, eventually I got it but I did find it much more difficult then what I have seen, possibly because the knot was very tight

Good use SDD!

-
DAY 28
Used the tweezers from the XLT to remove a splinter.
-
@comis said:
Hmmm...but youtube reviewers always have a way to try to 'look good' in front of the camera, so it's probably never as easy as it's seen. But I think the point maybe was to use the pointy part to loosen different part of the knob little by little, just enough to get the process going?
Yeah I definitely agree with that. I tried that slow and steady approach and it finally worked just took some time ???
-
@Simon_Templar said:
I did it a few times, worked ok for me. You have to keep your expectations in check though. It's not as if the knot will just fall apart at the touch of the corkscrew. After screwing it in, you have to tug and wobble quite a bit before a tight knot will give in. Still a lot better then doing it with your fingers, at least in my opinion.Thanks Simon! Yes definitely better than fingers, I think it also came down to how tight the knot was which made it more time consuming and tedious

-
@Reinier said:
Even Neil (I miss him!) said the blades are not sharpened: /post/438008I hear that quite often too, but my copy surely is sharp as a tack!
Let's see whether FB's copy is sharp as well...kinda curious.

@Simon_Templar said:
I did it a few times, worked ok for me. You have to keep your expectations in check though. It's not as if the knot will just fall apart at the touch of the corkscrew. After screwing it in, you have to tug and wobble quite a bit before a tight knot will give in. Still a lot better then doing it with your fingers, at least in my opinion.@SDDToolCo said:
Thanks Simon! Yes definitely better than fingers, I think it also came down to how tight the knot was which made it more time consuming and tedious

-
<u>Day 28</u>

Though I have been using the Giant for last few weeks, I haven't really gotten a chance to sit down and try to learn every tool I got on the Giant. So today I did just that.
I think the purpose of Giant is to demonstrate the vast diversity of tools from Wenger, but having said that, cross checking it with all the tools listed on SAKwiki has shown not every tools Wenger ever made for 85mm is actually present. In fact, many 'speSmurfpillst tools' are not included. Some of the speSmurfpillst tools I really have absolutely no idea what's that for, unless looking them up online or I am in that hobby. For example, I would have no idea this tool is for the shotgun choke tube.
Though I don't ever use this tool, I did guess right about this being a thread depth gauge.
This tool is never listed on SAKwiki, but I have guessing it's the #58 Special Military Screwdriver?

What do you all think? Is it #58 or is it something else?
-
@SDDToolCo said:
Thank you Vicman!Great use! Those tweezers are great!
Thanks SDD!

-
Day 28
Decided the XLT needs even more colour. Now it reminds me of the Joker (from Batman)

-

Though I have been using the Giant for last few weeks, I haven't really gotten a chance to sit down and try to learn every tool I got on the Giant. So today I did just that.Very interesting. Wenger went a bit over the top with their SAK tools, in a mad scientist kind of way. I respect that
Still, I am more the Victorinox kind of guy. -
Day 28
It's exactly 58 mm.

-
@Simon_Templar said:
Day 28Decided the XLT needs even more colour. Now it reminds me of the Joker (from Batman)
Nice pic Simon!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
