Sharpening methods
-
@David Bowen said:
Nothing wrong with the Field Sharpener. I have one, and it's one of WS"s best selling items for a reason. Mine doesn't get used no where as much as it should. It takes the simplicity of freehand, and gives a little assistance for those new to sharpening.Sent from my SM-G996U using Tapatalk
I have been using the field sharpener for my traditional knives. What works best for me is rather than grip the end, I lay it flat on the palm of my hand.
That way it does not wobble and it stops me from using too much pressure.. -
This video has put me off the mk2 for now.
https://youtu.be/1R0zWkb2k6s?si=rItYEUnQPu3S2KJp -
that looks handy
-
I have the mk1 and it took some practice. Because if you are using a coarse grit or have the belt running too fast it’s easy to remove to much metal.
So until you perfect your consistency of pass keep it finer and belt speed slower. Then once you get your confidence you increase the speed to your sweet spot.And start on knives that it does not matter if you dou ruin them. I am quite proficient but still would worry about sharpening an expensivie knife for now because I’m not “muscle memory” good yet.
-
@chip said:
I have the mk1 and it took some practice. Because if you are using a coarse grit or have the belt running too fast it’s easy to remove to much metal.
So until you perfect your consistency of pass keep it finer and belt speed slower. Then once you get your confidence you increase the speed to your sweet spot.And start on knives that it does not matter if you you ruin them. I am quite proficient but still would worry about sharpening an expensive knife for now because I’m not “muscle memory” good yet.
-
I picked up a used Mk1 but I still need to learn how to use it. Give it a bit of a go on my lawnmower blade and I did ok. Definitely need more practice before I start using it on my nice knives.
-
@AzteCypher said:
I picked up a used Mk1 but I still need to learn how to use it. Give it a bit of a go on my lawnmower blade and I did ok. Definitely need more practice before I start using it on my nice knives.That's what kitchen knives and Opinels are for.

-
@pfrsantos said:
That's what kitchen knives and Opinels are for.

And even better if you can learn on other peoples kitchen knives like I did

-
I actually do have a few I can practice on. Need to make time this weekend.
-
@AzteCypher said:
I actually do have a few I can practice on. Need to make time this weekend.
practice makes perfect. -
Also when using the worksharp elite it creates a good burr due to the fact you are sharpening edge trailing. Which is really helpful because you can literally watch it form once you hit the edge as you make a pass.
I am getting better at stropping but no way as good as I would like to be, so found making a few passes on a very fine ceramic rod was excellent at knocking off the burrs.
-
Try using a light oil on your diamond stones it cleans and keeps them from getting plugged up. They work a lot better with oil. I use WD-40 because I buy it buy it by the gallon. I use cutting board oil on knives with wood scales it is a thin mineral oil it looks like it would work well. The three biggest mistakes people make stopping is the wrong angle it is better to start with less angle all flat. As you are finishing a pass on a strop or stone do not let the tip of the blade leave the stone or the strop. when stropping use very light pressure. A rubber mouse pad is much more forgiving than a leather strop.
-
I use glass cleaner (nilglass) as a lapping fluid when using my diamond plates to stop them from clogging.
And then a quick spray and wipe down when I am done keeps them clean.
Also any glass cleaner residue left behind evaporates much quicker than water. Never had any problems with rust.I too use chopping board oil on all my knives as it’s very cheap and food safe.
-
@David Bowen said:
I've yet to check out a DMT Aligner, maybe this fall I'll get the chance. It's similar in function to the Lansky/Gatco I feel. DMT makes good products, I hear people complain about quality from time to time but nothing crazy.Sent from my SM-G996U using Tapatalk
It is very similar to both Lansky and Gatco. I had picked up at a state fair after a demonstration and just find it works for my needs. I’ve thought of trying the Lansky, but because of the similarities just wasn’t sure how much I’d can.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login