Brass Rod NOW!!!
-
I know I sound slightly impatient... okay, monumentally impatient, but I have waited almost a year to try and get my hands on the 2.25 and 2.5mm brass rods to mod SAKs, and I have tried places in the UK, and half the states in the US with absolutely no luck. It's not like someone has them and they're just too expensive, I can't find anyone who has I them. I just need someone who says "yes, I have those, I can ship them tomorrow." If anyone can direct me to a source, I would love you forever. I did my first mod last month and frankly, I don't want to have to buy thick SAKs just to be able to reuse the rods. I sacrificed my champion, the only knife thick enough to reuse the pins (besides my Scibeer EDC and that is NEVER going to see a drill or vice again
). So anyone want to be my hero for life and hook me up? :D UK sources are not a problem btw, as long as they can ship to the US I have no problem with that. -
Believe it or not I found brass rod stock at a nearby hobby shop. They had 3/32, 1/16 and 1/8 in stock in three foot lengths. The 3/32 is almost perfect size and I simply put a piece in a drill and sanded to make it small enough for the two center pins. Four three foot pieces just under 5 dollars. I guess they are used by modellers for something but I just finished creating a scientist using them and it went a lot better than I expected for my first complete dissassemble and reassemble mod. Hope this helps.
-
Yeah I called all my local hobby shops and they were no help. I also ordered some from Rotokid but his is American size and must to milled down, and I tried milling it for 10 minutes with no progress, so I'd really like to just get some that's ready to go. Heck, if anyone has the means to mill it down I would pay you to do that.
-
McMaster Carr has packs of 2.5 and 3.0mm you can get anytime. The 2.25mm stuff is nonexistant unobtanium. You are pretty much stuck sanding something down.
-
According to google:
2.2 millimeters = 0.0866141732 in
And they sell .081in brass rod, so that's good enough for me to try, Gareth said he has a local place that sells 2.2mm and it it a negligible difference. Anyway,
to you Scibeer, I ordered what I understand to be 384 ft of brass rod, a lifetime supply, I hope :P Now I just need to get a smaller drill bit so I don't mess up anymore center bushings and I will be set for life! Thanks a million!!! 
-
384ft :o You'll be supplying everyone else :D
I hope you get sorted finally. For the record, the reducing of brass stock is officially the most tedious part of modding by an order or magnitude. I hate it, hate it, hate

Neil
-
@NKB said:
384ft :o You'll be supplying everyone else :DI hope you get sorted finally. For the record, the reducing of brass stock is officially the most tedious part of modding by an order or magnitude. I hate it, hate it, hate

Neil
Precisely why I intentionally purchased the right size (and a hair under the right size), hopefully I will be spared from needing to alter it in any way to get it to work.
-
Bah...wimps!

Back in the day we used to make our own pins by chewing empty brass cartridges...while walking barefoot in the snow... :D
-
...sometimes we were chased by Polar Bears too :D
-
... and those must have been the good times, cause you would force the bears to chew the brass for you... :D
-
Yeah...otherwise we would have to swallow the brass and extrude the correct diameter pinstock ourselves... ::)
-
I'll get my coat...
-
@Ben X said:
According to google:2.2 millimeters = 0.0866141732 in
And they sell .081in brass rod, so that's good enough for me to try, Gareth said he has a local place that sells 2.2mm and it it a negligible difference. Anyway,
to you Scibeer, I ordered what I understand to be 384 ft of brass rod, a lifetime supply, I hope :P Now I just need to get a smaller drill bit so I don't mess up anymore center bushings and I will be set for life! Thanks a million!!! 
384 feet :o I hope they cut it up before they try to deliver it.
I have no idea what size my pinstock is. Rotokid sorted me out with a selection, but I'm pretty sure I've about 4 or 5 different diameters. I don't have huge amounts of it, but I'd happily let you have a little if I have the right size Ben. I can spare enough to do an SAK or two I'm sure.
-
-
-
Thanks Dave, that's very kind of you, I will let you know if the stuff I have coming for some reason will not work, and I certainly would compensate you appropriately as well :D
And yes, they cut it up, I wanted it all in one piece but they didn't think the UPS truck would make his turns too well. Plus I live in a 12x10 cell, er, dorm room, I mean... :P
Well thanks again, Scibeer, if all goes well, in 5-9 business days I will be hammering out a few mods I've already sketched :D So lots of SAK porn in the forecast, especially with Spring Break rapidly approaching as well.
-
Wow, I find my title highly ironic- I ordered the rods yesterday LATE afternoon- had a message this morning from the campus post office that I had a UPS package! Talk about FAST! Literally, in under 24 hours, it went from Georgia to Tennessee! So, I got just what I needed!
<---- That was me this morning. Oh, and I misread the site, it was 16 feet of each, but still, easily a year's supply (maybe). I can't wait to get started! Thanks all for the help. Now I have to make some tough choices about which SAKs are going to to operating room >:D -
Glad you managed to get some Ben. Looking forward to the next mod.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



