firearms
-
I hope it is a lot easier than to find some Remington chokes. This city is bust for those...and that surprised me a little. I was looking for something that I could use different chokes on...little did I know that I wouldn't be able to find an improved cylinder...or anything for that mater.

As soon as I can find them online on the Canadian side or something, I have my sights on a few more Remington Wingmaster HD chokes. I truly appreciate the tool-less design of these.
-
Ok. I finally got to go down to the club and shoot some things. I was able to sight in my Ruger 10/22. I shot around 200 rounds, 8 of those failed in some way. I had 2 squib loads (I was thankful to have brought a flashlight, as I wasn't sure if the projectile had enough power to exit the barrel). Before you ask, I have dedicated my motorcycle MUT to the range bag. It came in handy as one of the rounds got lodged in the chamber. I was able to gently coax it out with the carbon scraper.
My friend also brought his 40 caliber Glock 22 for me to try out. I wasn't sure what to expect, but the first shot sort of startled me somewhat. I wasn't expecting such a kick. I only got to shoot 10 rounds, but towards the last 2, I was just starting to get used to it...somewhat.
He also brought an older Buckmark pistol that looked a lot like my much newer hunter. That was great fun to shoot. He even brought a few .22LR pellet rounds to try out. Those exhibited less recoil that a regular .22LR, which didn't compare to the 40 caliber at all.
Last but not least, he brought a 20 gauge shotgun to try out.
All in all, a pleasant time. I have my range safety seminar this Tuesday. Hopefully, my ATT for the Plinkerton will come in soon as well.

-
@Chako said:
Ok. I finally got to go down to the club and shoot some things. I was able to sight in my Ruger 10/22. I shot around 200 rounds, 8 of those failed in some way. I had 2 squib loads (I was thankful to have brought a flashlight, as I wasn't sure if the projectile had enough power to exit the barrel). Before you ask, I have dedicated my motorcycle MUT to the range bag. It came in handy as one of the rounds got lodged in the chamber. I was able to gently coax it out with the carbon scraper.My friend also brought his 40 caliber Glock 22 for me to try out. I wasn't sure what to expect, but the first shot sort of startled me somewhat. I wasn't expecting such a kick. I only got to shoot 10 rounds, but towards the last 2, I was just starting to get used to it...somewhat.
He also brought an older Buckmark pistol that looked a lot like my much newer hunter. That was great fun to shoot. He even brought a few .22LR pellet rounds to try out. Those exhibited less recoil that a regular .22LR, which didn't compare to the 40 caliber at all.
Last but not least, he brought a 20 gauge shotgun to try out.
All in all, a pleasant time. I have my range safety seminar this Tuesday. Hopefully, my ATT for the Plinkerton will come in soon as well.

2 Squib loads! Did the projectile get stuck in the barrel? If so I would stop shooting from that box immediately and send the manufacturer a email about your issues. Squib loads are no joke and should not be that common. I have never experienced a squib load in over 20 + years of shooting.
Regarding the other malfunctions with the 10/22. What kind of malfunctions were they? Did you clean the rifle before taking it out the first time?
The 40 caliber Glocks can be quite "snappy" in recoil. I really like Glocks in 9mm.
Congrats on getting out to the range. You will be shooting like Buffalo Bill in no time. :D
-
I am NOT a fan of .40. Too snappy for my liking. I never feel 100% in control of the piece, and the time to come back to a second shot is way too long, IMO.
I'm quite happy with 9mm. Also, a good deal cheaper than any other centerfire round.
On the squib loads... uh, wow. Yeah, that $#!+ is NOT funny. I'd send a nasty-gram to the ammo manufacturer.
-
A few of the club members tell me that is somewhat common with rim fire rounds. They tell me they are made very cheaply these days. Each time, we carefully stopped what we were doing and shone a light in the breech to examine the barrel. I was ok with that as the various failures taught me how to deal with each in turn. Both shot the bullet a mere two dozen feet past the barrel, and you could tell right away as there was little to no rapport.
I did clean the barrel, but did not oil up my drum magazine before shooting. Not sure if that had anything to do with it. I will have to shoot more lead downrange to figure that out...something I think will not be an onerous task. :D
I also had a few where the primer fired, the bullet went bang, but the bullet remained attached to the shell.
After looking online...I guess I bought some pretty bad stuff. I was shooting Remington Golden Bullets. Sounds like I was lucky compared to a few other folks. I only had 8 issues out of 200 rounds. My problem, I bought two boxes of 525 rounds each. :facepalm:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Squib loads are not common with .22. Duds, like primers that do not go off more common with rim fire than center fire.
Aftermarket magazines can cause failures to feed.
Remington Golden Bullet is about the last .22 I would buy. The best of the cheaper stuff is Federal. I am pretty picky about what I will shoot.
Just so we are on the same page here. A squib load is when the cartridge is fired and the bullet comes out of the cartridge, but does not exit the barrel and is lodged in the barrel. You are saying this happened twice correct?
-
Ok...maybe my definition is not the right one here. Both times, the bullet did exit the barrel...if just barely.
I also had a few where the bullet remained on the cartridge after firing. After inspecting those, there was a clear firing pin mark on the base, but you could tell where the hot gasses leaked in one spot around the bullet. Is this caused by crappy crimping or something?
A few also exhibited an indent (dimple) on the base of the casing. Those failed to fire, and I just disposed of those as I could. Guess once I am done with Remington Golden Bullets, I won't be buying anymore. So much for the guy recommending them to me at Canadian Tire. :D
-
@Chako said:
Ok...maybe my definition is not the right one here. Both times, the bullet did exit the barrel...if just barely.Okay. I thought so because it did not seem like we were talking about the same thing. Well that's good news at least. Sounds like some under powered loads which would cause a failure like failure to eject/feed. Again, this can also be caused by aftermarket magazines as well. I would be very mindful of that ammunition until you shoot through it as if their are under powered loads that could actually cause a squib.
Anyways, it's great you got to go shoot. Keep us posted on your next range trip.

-
Not all failures occurred with the 110 round drum. Some of those occurred with the stock factory 10 round Ruger rotary magazine. From what I saw, mind you, I only shot a total of 200 rounds, the failures didn't seem to care if I was using the third party rotary magazine or the Ruger ones. I think it is the bullet at question here. Going to try them again the second time I take it to the range and see what is up.
-
@Chako said:
I also had a few where the bullet remained on the cartridge after firing. After inspecting those, there was a clear firing pin mark on the base, but you could tell where the hot gasses leaked in one spot around the bullet. Is this caused by crappy crimping or something?A few also exhibited an indent (dimple) on the base of the casing. Those failed to fire, and I just disposed of those as I could. Guess once I am done with Remington Golden Bullets, I won't be buying anymore. So much for the guy recommending them to me at Canadian Tire. :D
It could of been from poor crimping or possibly a crack in the case. When you have failures like that or anything weird happens, keep the bullet for inspection later. It can tell a lot and you might need to look at it later to find out what happened.
I would go back and slap the guy who recommended those to you. :D
I do not wan't to worry you, but with the problems you are having with that particular batch of Golden Bullets I would send a e-mail to them and see what can be done. I would not be to enthusiastic about shooting the rest of those. I have heard of companies having you return the ammunition and sending vouchers for replacement.
-
@Chako said:
Not all failures occurred with the 110 round drum. Some of those occurred with the stock factory 10 round Ruger rotary magazine. From what I saw, mind you, I only shot a total of 200 rounds, the failures didn't seem to care if I was using the third party rotary magazine or the Ruger ones. I think it is the bullet at question here. Going to try them again the second time I take it to the range and see what is up.I would disassemble and clean it before your next trip. Make sure the bolt is nice and lubed (not to much though). I always clean a gun before its first range trip as their is almost always metal particles left behind form production.
-
A step ahead of you. I am going to clean them religiously and have already done so.
-
At the range, a member brought in a Canadian shooting publication with a bit of information that I thought was amazing. Apparently, back in November, a judge declared that anything that shoots 300 fps or more is considered a firearm. In Canada, you are allowed to buy air rifles and pistols without a PAL so long as it is less than 500 fps. With this new ruling, you may buy them, but you have to store them properly as if they were firearms. No longer storing them in a closet is good now. There is now also a 3 tier classification system. Low powered = less than 300 fps...store anywhere. Medium powered = 300 to 500 feet per second, locked container or trigger guard. High powered = more than 500 feet per second, locked container and or trigger guard plus a PAL to buy and own one.
So the definition of a firearm just got broadened in Canada. The article I read also stated that the ruling not only applied to air rifles and pistols, but also to air canons, home made spud guns, etc...
-
Had a nice day at the range yesterday (Sunday) got through a bunch of ammo.
3 boxes of shotgun ammo (75rnds)
about 50rnds in the 22-250 55gn Ballistic Tip handloads
50(ish) shots out of the 6.5x55, 20x 100gn Ballistic Tips and 30 or so 160gn Cast projectiles loaded subsonic with Trail Boss powder.
and 15 in my .300 WinMag 125gn ballistic tips at a smidgen over 3500fpsShoulder is a little doughy this morning (that would be the WinMag, it's a reamed out .308Win K98 Mauser and doesn't weigh a lot.)
-
@PTRSAK said:
Had a nice day at the range yesterday (Sunday) got through a bunch of ammo.
3 boxes of shotgun ammo (75rnds)
about 50rnds in the 22-250 55gn Ballistic Tip handloads
50(ish) shots out of the 6.5x55, 20x 100gn Ballistic Tips and 30 or so 160gn Cast projectiles loaded subsonic with Trail Boss powder.
and 15 in my .300 WinMag 125gn ballistic tips at a smidgen over 3500fpsShoulder is a little doughy this morning (that would be the WinMag, it's a reamed out .308Win K98 Mauser and doesn't weigh a lot.)
Did you have some issues with your .300 Winnie? Noticed you only shot 15 of them.

-
Had a nice day at the range yesterday (Sunday) got through a bunch of ammo.
3 boxes of shotgun ammo (75rnds)
about 50rnds in the 22-250 55gn Ballistic Tip handloads
50(ish) shots out of the 6.5x55, 20x 100gn Ballistic Tips and 30 or so 160gn Cast projectiles loaded subsonic with Trail Boss powder.
and 15 in my .300 WinMag 125gn ballistic tips at a smidgen over 3500fpsShoulder is a little doughy this morning (that would be the WinMag, it's a reamed out .308Win K98 Mauser and doesn't weigh a lot.)
Did you have some issues with your .300 Winnie? Noticed you only shot 15 of them.

Issues were
- Technically it's too powerful for our range. We are actually in the middle of suburbia and 30cal plus calibers are supposed to be restricted to under 3000fps.
This Google Earth view is 5 years out of date, there's a lot more houses now. - It's too bloody loud, everyone gets the smurfs with it. bloody sooks
- I only had 35 loaded rounds of my 100 cases and wanted to leave a box in case I get a trip away before I manage to get a reloading session in.
as far as recoil goes, it's really quite a pu****ssycat with these lightweight pills, even if it is a bit concussive. But I was shooting it off the bench and that tends to put one in a less recoil tolerant posture. and I haven't fired anything except subsonics out of the Swede in nearly 2 years. Kicks a bit harder with 220gn roundnose but it's still nothing compared to the .458. I wouldn't even get to 5 out of that, let alone 15.
- Technically it's too powerful for our range. We are actually in the middle of suburbia and 30cal plus calibers are supposed to be restricted to under 3000fps.
-
Brought my Browning 870 SPS turkey shotgun to the range yesterday and noticed a few issues. I know this gun needs breaking in, and I am not worried at all, but it sure didn't like Winchester Universal #4 shot as it would jam 9 times out of 10. We brought it back into the club house and gave it a real good cleaning, and that seemed to help it somewhat. Likewise, my dot sight went north after a box of shells went down range. I am going to have to take a closer look at that. I also added a mag extension and we couldn't figure out how to access it. After much fiddling, we noticed there are 2 indents and sure enough, after re-reading the installation manual very closely (once I got home), I will have to file those away, as I could only load 4 rounds in the existing mag.
With all that, it was great fun. My friend brought his older 870, and man, I wouldn't trade his hard shoulder pad for my super soft pad. That made a world of difference.
Going to be taking my range safety seminar at noon today, and that should allow me to go shooting alone.

-
That's a new shotgun. I would NOT just go filing off pins in it.
Personally, I would take it to the shop where I purchased it and tell them exactly what it was doing and what your suspicion is. THEY should get it right. Maybe the pin is correct but the barrel is flawed. Unless you have intimate knowledge of the Remington 870, I would not be filing down ANYTHING on a new weapon.
Besides not knowing what you're doing, you could be potentially making the weapon dangerous (as in higher risk of catastrophic failure).
My 870 Express has never failed to shoot whatever slug, saboted round, shotgun shell that has been fed into it from temperatures down to the low teens up to the upper 90's.
Finicky about ammunition is NOT a characteristic of the ultra-reliable 870.
-
How did the shotgun jam? Was the extractor slipping off the rim of the shell? Pump-action shotguns are not exactly known for being picky with ammunition. In fact, it's pretty damn hard to jam one up in my experience, even century-old designs like the Winchester 1897. I wonder if part of your problem though is that you're shooting 2 3/4" shells in a 3 1/2" chamber. Just a thought. As for the butt pad on your shotgun, again, you have a shotgun chambered for 3 1/2" magnum shotshells. They throw larger shot loads with more powder than traditional trap or wingshooting loads......
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login