firearms
-
Not all failures occurred with the 110 round drum. Some of those occurred with the stock factory 10 round Ruger rotary magazine. From what I saw, mind you, I only shot a total of 200 rounds, the failures didn't seem to care if I was using the third party rotary magazine or the Ruger ones. I think it is the bullet at question here. Going to try them again the second time I take it to the range and see what is up.
-
@Chako said:
I also had a few where the bullet remained on the cartridge after firing. After inspecting those, there was a clear firing pin mark on the base, but you could tell where the hot gasses leaked in one spot around the bullet. Is this caused by crappy crimping or something?A few also exhibited an indent (dimple) on the base of the casing. Those failed to fire, and I just disposed of those as I could. Guess once I am done with Remington Golden Bullets, I won't be buying anymore. So much for the guy recommending them to me at Canadian Tire. :D
It could of been from poor crimping or possibly a crack in the case. When you have failures like that or anything weird happens, keep the bullet for inspection later. It can tell a lot and you might need to look at it later to find out what happened.
I would go back and slap the guy who recommended those to you. :D
I do not wan't to worry you, but with the problems you are having with that particular batch of Golden Bullets I would send a e-mail to them and see what can be done. I would not be to enthusiastic about shooting the rest of those. I have heard of companies having you return the ammunition and sending vouchers for replacement.
-
@Chako said:
Not all failures occurred with the 110 round drum. Some of those occurred with the stock factory 10 round Ruger rotary magazine. From what I saw, mind you, I only shot a total of 200 rounds, the failures didn't seem to care if I was using the third party rotary magazine or the Ruger ones. I think it is the bullet at question here. Going to try them again the second time I take it to the range and see what is up.I would disassemble and clean it before your next trip. Make sure the bolt is nice and lubed (not to much though). I always clean a gun before its first range trip as their is almost always metal particles left behind form production.
-
A step ahead of you. I am going to clean them religiously and have already done so.
-
At the range, a member brought in a Canadian shooting publication with a bit of information that I thought was amazing. Apparently, back in November, a judge declared that anything that shoots 300 fps or more is considered a firearm. In Canada, you are allowed to buy air rifles and pistols without a PAL so long as it is less than 500 fps. With this new ruling, you may buy them, but you have to store them properly as if they were firearms. No longer storing them in a closet is good now. There is now also a 3 tier classification system. Low powered = less than 300 fps...store anywhere. Medium powered = 300 to 500 feet per second, locked container or trigger guard. High powered = more than 500 feet per second, locked container and or trigger guard plus a PAL to buy and own one.
So the definition of a firearm just got broadened in Canada. The article I read also stated that the ruling not only applied to air rifles and pistols, but also to air canons, home made spud guns, etc...
-
Had a nice day at the range yesterday (Sunday) got through a bunch of ammo.
3 boxes of shotgun ammo (75rnds)
about 50rnds in the 22-250 55gn Ballistic Tip handloads
50(ish) shots out of the 6.5x55, 20x 100gn Ballistic Tips and 30 or so 160gn Cast projectiles loaded subsonic with Trail Boss powder.
and 15 in my .300 WinMag 125gn ballistic tips at a smidgen over 3500fpsShoulder is a little doughy this morning (that would be the WinMag, it's a reamed out .308Win K98 Mauser and doesn't weigh a lot.)
-
@PTRSAK said:
Had a nice day at the range yesterday (Sunday) got through a bunch of ammo.
3 boxes of shotgun ammo (75rnds)
about 50rnds in the 22-250 55gn Ballistic Tip handloads
50(ish) shots out of the 6.5x55, 20x 100gn Ballistic Tips and 30 or so 160gn Cast projectiles loaded subsonic with Trail Boss powder.
and 15 in my .300 WinMag 125gn ballistic tips at a smidgen over 3500fpsShoulder is a little doughy this morning (that would be the WinMag, it's a reamed out .308Win K98 Mauser and doesn't weigh a lot.)
Did you have some issues with your .300 Winnie? Noticed you only shot 15 of them.

-
Had a nice day at the range yesterday (Sunday) got through a bunch of ammo.
3 boxes of shotgun ammo (75rnds)
about 50rnds in the 22-250 55gn Ballistic Tip handloads
50(ish) shots out of the 6.5x55, 20x 100gn Ballistic Tips and 30 or so 160gn Cast projectiles loaded subsonic with Trail Boss powder.
and 15 in my .300 WinMag 125gn ballistic tips at a smidgen over 3500fpsShoulder is a little doughy this morning (that would be the WinMag, it's a reamed out .308Win K98 Mauser and doesn't weigh a lot.)
Did you have some issues with your .300 Winnie? Noticed you only shot 15 of them.

Issues were
- Technically it's too powerful for our range. We are actually in the middle of suburbia and 30cal plus calibers are supposed to be restricted to under 3000fps.
This Google Earth view is 5 years out of date, there's a lot more houses now. - It's too bloody loud, everyone gets the smurfs with it. bloody sooks
- I only had 35 loaded rounds of my 100 cases and wanted to leave a box in case I get a trip away before I manage to get a reloading session in.
as far as recoil goes, it's really quite a pu****ssycat with these lightweight pills, even if it is a bit concussive. But I was shooting it off the bench and that tends to put one in a less recoil tolerant posture. and I haven't fired anything except subsonics out of the Swede in nearly 2 years. Kicks a bit harder with 220gn roundnose but it's still nothing compared to the .458. I wouldn't even get to 5 out of that, let alone 15.
- Technically it's too powerful for our range. We are actually in the middle of suburbia and 30cal plus calibers are supposed to be restricted to under 3000fps.
-
Brought my Browning 870 SPS turkey shotgun to the range yesterday and noticed a few issues. I know this gun needs breaking in, and I am not worried at all, but it sure didn't like Winchester Universal #4 shot as it would jam 9 times out of 10. We brought it back into the club house and gave it a real good cleaning, and that seemed to help it somewhat. Likewise, my dot sight went north after a box of shells went down range. I am going to have to take a closer look at that. I also added a mag extension and we couldn't figure out how to access it. After much fiddling, we noticed there are 2 indents and sure enough, after re-reading the installation manual very closely (once I got home), I will have to file those away, as I could only load 4 rounds in the existing mag.
With all that, it was great fun. My friend brought his older 870, and man, I wouldn't trade his hard shoulder pad for my super soft pad. That made a world of difference.
Going to be taking my range safety seminar at noon today, and that should allow me to go shooting alone.

-
That's a new shotgun. I would NOT just go filing off pins in it.
Personally, I would take it to the shop where I purchased it and tell them exactly what it was doing and what your suspicion is. THEY should get it right. Maybe the pin is correct but the barrel is flawed. Unless you have intimate knowledge of the Remington 870, I would not be filing down ANYTHING on a new weapon.
Besides not knowing what you're doing, you could be potentially making the weapon dangerous (as in higher risk of catastrophic failure).
My 870 Express has never failed to shoot whatever slug, saboted round, shotgun shell that has been fed into it from temperatures down to the low teens up to the upper 90's.
Finicky about ammunition is NOT a characteristic of the ultra-reliable 870.
-
How did the shotgun jam? Was the extractor slipping off the rim of the shell? Pump-action shotguns are not exactly known for being picky with ammunition. In fact, it's pretty damn hard to jam one up in my experience, even century-old designs like the Winchester 1897. I wonder if part of your problem though is that you're shooting 2 3/4" shells in a 3 1/2" chamber. Just a thought. As for the butt pad on your shotgun, again, you have a shotgun chambered for 3 1/2" magnum shotshells. They throw larger shot loads with more powder than traditional trap or wingshooting loads......
-
No fear, I am bringing it around the shop today to find out what they can do about it.
The jams were so extreme that we had to bang it hard off of a hard surface to unjam it. The pump mechanism wouldn't budge, the action button in front of the trigger guard would be stuck inwards.
It only had issues with the #4. Not exactly happy with the situation to be honest. Going to see what the shop will tell me.
-
Well having some bad luck with the local dealer. In fact, they are doing a great job of pissing me off nicely.
The owner told me my shotgun is now used and if I wanted to trade it in for a left handed one, I would take a financial hit. I told him not to insult me and that I will keep it. However, I did leave it in his hands to see if he can do the magazine tube installation, as I don't want to do it as it is a new gun. No telling when that will get done. I am still waiting for 2 Buckmark magazines that have been on order since January. He still hasn't looked at the Hi Point magazine...and now the fun with this shotgun. I am thinking I wished I had never bought items from him...as he is terrible on customer service. Many club members did warn me...but I had bought quite a bit of gear before I got the warning.
I guess they will see me on a daily basis soon and be a general pain in the butt until I get my stuff working as it should.
This is probably the last gun I will buy from them. Not happy at all as I now know he won't stand by his products.

Meet a cheap little plinker. Can't wait to try it out...still waiting for the ATT from the club so that I can start practicing with my handguns. Looks like the OPP are dragging their feet on those for some reason.
Anyways, this is a Cimmeron Plinkerton SA revolver. I know you get what you pay for, but I am unsure if I will like this form of handgun. Better to try it out for a few hundred than go into it big and hate it. After all the fun I am having with the local gun shop, I can see why buying online is so much more prevalent.
Yeah, so very smufed about the local dealer. That shotgun I bought, the shells keep landing on my arm. I hope the action gets better and starts tossing those shells a little further away from the shooter. Time will tell.
-
What about the misfeeds? Where the shells eject is really not related to misfeeds. What was causing that? The choke tubes just screw into the end of the barrel (you can see the threads looking into the barrel--unloaded, breech open and trigger lock on of course).
The 870 Express comes with a modified choke pre-installed and a couple other chokes are included. (It also comes with the rifled barrel which is super nice).
Chako, you need to find out why those shells misfed. Something isn't right there. It might be you bought the wrong shotgun shells, but that is something that has to be sorted out. It is not a normal condition for an 870 to have feeding problems.
-
It was only having issues with the one type of shell. There is another club member who had similar issues. The word is that the new 870s are not as good as the older ones. Not sure if that is right or not. As for my gun...it only came with the super full turkey/predator choke. Not all of them come with multiple chokes. Mine also did not come with a rifled barrel. I can add those if and when I wish at my cost.
I have done some extensive online reading, and I also hear that they need a break in period. I didn't shoot enough shells down range to be considered a break in period.
After taking a closer look at those shells, the thin steel base was deformed a little in that they expanded somewhat. My friend and I figures that may be the issue. The shotgun had no issues with other shotshells
-
Cheap it may be, but I do like the idea of that revolver.

-
@Chako said:
It was only having issues with the one type of shell. There is another club member who had similar issues. The word is that the new 870s are not as good as the older ones. Not sure if that is right or not. **As for my gun...it only came with the super full turkey/predator choke. **Not all of them come with multiple chokes. Mine also did not come with a rifled barrel. I can add those if and when I wish at my cost.I have done some extensive online reading, and I also hear that they need a break in period. I didn't shoot enough shells down range to be considered a break in period.
After taking a closer look at those shells, the thin steel base was deformed a little in that they expanded somewhat. My friend and I figures that may be the issue. The shotgun had no issues with other shotshells
Your photo shows 2 choke tubes (the silver cylinders), and you likely have one already in the barrel (probably you super full turkey). The choke tubes will be marked what they are and often will say on them if they can be used with slugs.
If you were shooting those Winchester shells in the picture, I've run a couple dozen of those boxes through my 870 no problem. If they're not feeding correctly, take them back, show the gunshop owner, because the lot should probably be recalled. That's a serious defect.
-
Did I say Browning? It is a Remington 870. My only defense is that I have been fighting a fever for a couple of days now and it makes thinking a little difficult.No those are not choke tubes, but snap caps. My shotgun only came with the one. I will need to buy the others if and when I can.
Well the shop has the shotgun as they have to file two nubs to allow access to the mag tube extension, and also to look at that red dot sight as something was off with it. When I get it, I will try to run more shells into it to see if it still jams...if it does I will look into that.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





