firearms
-
What about the misfeeds? Where the shells eject is really not related to misfeeds. What was causing that? The choke tubes just screw into the end of the barrel (you can see the threads looking into the barrel--unloaded, breech open and trigger lock on of course).
The 870 Express comes with a modified choke pre-installed and a couple other chokes are included. (It also comes with the rifled barrel which is super nice).
Chako, you need to find out why those shells misfed. Something isn't right there. It might be you bought the wrong shotgun shells, but that is something that has to be sorted out. It is not a normal condition for an 870 to have feeding problems.
-
It was only having issues with the one type of shell. There is another club member who had similar issues. The word is that the new 870s are not as good as the older ones. Not sure if that is right or not. As for my gun...it only came with the super full turkey/predator choke. Not all of them come with multiple chokes. Mine also did not come with a rifled barrel. I can add those if and when I wish at my cost.
I have done some extensive online reading, and I also hear that they need a break in period. I didn't shoot enough shells down range to be considered a break in period.
After taking a closer look at those shells, the thin steel base was deformed a little in that they expanded somewhat. My friend and I figures that may be the issue. The shotgun had no issues with other shotshells
-
Cheap it may be, but I do like the idea of that revolver.

-
@Chako said:
It was only having issues with the one type of shell. There is another club member who had similar issues. The word is that the new 870s are not as good as the older ones. Not sure if that is right or not. **As for my gun...it only came with the super full turkey/predator choke. **Not all of them come with multiple chokes. Mine also did not come with a rifled barrel. I can add those if and when I wish at my cost.I have done some extensive online reading, and I also hear that they need a break in period. I didn't shoot enough shells down range to be considered a break in period.
After taking a closer look at those shells, the thin steel base was deformed a little in that they expanded somewhat. My friend and I figures that may be the issue. The shotgun had no issues with other shotshells
Your photo shows 2 choke tubes (the silver cylinders), and you likely have one already in the barrel (probably you super full turkey). The choke tubes will be marked what they are and often will say on them if they can be used with slugs.
If you were shooting those Winchester shells in the picture, I've run a couple dozen of those boxes through my 870 no problem. If they're not feeding correctly, take them back, show the gunshop owner, because the lot should probably be recalled. That's a serious defect.
-
Did I say Browning? It is a Remington 870. My only defense is that I have been fighting a fever for a couple of days now and it makes thinking a little difficult.No those are not choke tubes, but snap caps. My shotgun only came with the one. I will need to buy the others if and when I can.
Well the shop has the shotgun as they have to file two nubs to allow access to the mag tube extension, and also to look at that red dot sight as something was off with it. When I get it, I will try to run more shells into it to see if it still jams...if it does I will look into that.

-
The only time I had shotgun loads not firing properly, little power and covering the barrel with powder, was when I was, intentionally, firing some 60 year old shells or some old, cheap reloads that got wet.
I rarely use any premium/expensive shells as I shoot the same with most shells (Varying the brand/load for the temperature, target etc.). I just use local or Spanish shells. US made shells are seen as "premium" here, mainly because of their higher cost. People assume that they must be good if they are expensive, ignoring the tax/shipping cost. :DMaybe the shells you have have gotten wet or are very old stock. Some shells have been made, looking about the same, for decades.
-
@Chako said:
Did I say Browning? It is a Remington 870. My only defense is that I have been fighting a fever for a couple of days now and it makes thinking a little difficult.No those are not choke tubes, but snap caps. My shotgun only came with the one. I will need to buy the others if and when I can.
Well the shop has the shotgun as they have to file two nubs to allow access to the mag tube extension, and also to look at that red dot sight as something was off with it. When I get it, I will try to run more shells into it to see if it still jams...if it does I will look into that.

I have two 870's and never had em choke on anything, betting like Whips said it is the ammo.
Come to think of it you might have said something like that also.
-
Huh. I've never thought to use a snap cap in a shot gun. Snap caps are important for rimfire, but I thought all modern centerfire (and a shotgun is really just another kind of centerfire) were fine to dry fire. Maybe that's not true, but I've dry fired a lot of shotguns a lot of times and have never had a firing pin problem.

Regardless, I'd probably just make my own "snap cap" out of an old shotgun shell.
On to another question:
When shoot clays, is there a significant disadvantage to using a 20 ga (in comparison to 12 ga), because there are fewer pellets going down range? I always sort of figured it was theoretical only, but maybe that's not true.
Regardless, I prefer the gentler kick of the 20ga.
-
@Mr. Whippy said:
Huh. I've never thought to use a snap cap in a shot gun. Snap caps are important for rimfire, but I thought all modern centerfire (and a shotgun is really just another kind of centerfire) were fine to dry fire. Maybe that's not true, but I've dry fired a lot of shotguns a lot of times and have never had a firing pin problem.
Regardless, I'd probably just make my own "snap cap" out of an old shotgun shell.
On to another question:
When shoot clays, is there a significant disadvantage to using a 20 ga (in comparison to 12 ga), because there are fewer pellets going down range? I always sort of figured it was theoretical only, but maybe that's not true.
Regardless, I prefer the gentler kick of the 20ga.
Can't say as I have ever dry fired a shotgun.
Never seen a shotgun cap cap for sure. Learn something new everyday.
-
@Mr. Whippy said:
Huh. I've never thought to use a snap cap in a shot gun. Snap caps are important for rimfire, but I thought all modern centerfire (and a shotgun is really just another kind of centerfire) were fine to dry fire. Maybe that's not true, but I've dry fired a lot of shotguns a lot of times and have never had a firing pin problem.

Regardless, I'd probably just make my own "snap cap" out of an old shotgun shell.
On to another question:
When shoot clays, is there a significant disadvantage to using a 20 ga (in comparison to 12 ga), because there are fewer pellets going down range? I always sort of figured it was theoretical only, but maybe that's not true.
Regardless, I prefer the gentler kick of the 20ga.
Can't say as I have ever dry fired a shotgun.
Never seen a shotgun cap cap for sure. Learn something new everyday.
At the end of the day, do you fire off the last shells or do you rack them out? If you rack them out, how do you relieve trigger pressure?
-
@Mr. Whippy said:
@Mr. Whippy said:
Huh. I've never thought to use a snap cap in a shot gun. Snap caps are important for rimfire, but I thought all modern centerfire (and a shotgun is really just another kind of centerfire) were fine to dry fire. Maybe that's not true, but I've dry fired a lot of shotguns a lot of times and have never had a firing pin problem.

Regardless, I'd probably just make my own "snap cap" out of an old shotgun shell.
On to another question:
When shoot clays, is there a significant disadvantage to using a 20 ga (in comparison to 12 ga), because there are fewer pellets going down range? I always sort of figured it was theoretical only, but maybe that's not true.
Regardless, I prefer the gentler kick of the 20ga.
Can't say as I have ever dry fired a shotgun.
Never seen a shotgun cap cap for sure. Learn something new everyday.
At the end of the day, do you fire off the last shells or do you rack them out? If you rack them out, how do you relieve trigger pressure?
Like keep my shotgun unloaded?

-
@Mr. Whippy said:
@Mr. Whippy said:
Huh. I've never thought to use a snap cap in a shot gun. Snap caps are important for rimfire, but I thought all modern centerfire (and a shotgun is really just another kind of centerfire) were fine to dry fire. Maybe that's not true, but I've dry fired a lot of shotguns a lot of times and have never had a firing pin problem.

Regardless, I'd probably just make my own "snap cap" out of an old shotgun shell.
On to another question:
When shoot clays, is there a significant disadvantage to using a 20 ga (in comparison to 12 ga), because there are fewer pellets going down range? I always sort of figured it was theoretical only, but maybe that's not true.
Regardless, I prefer the gentler kick of the 20ga.
Can't say as I have ever dry fired a shotgun.
Never seen a shotgun cap cap for sure. Learn something new everyday.
At the end of the day, do you fire off the last shells or do you rack them out? If you rack them out, how do you relieve trigger pressure?
Like keep my shotgun unloaded?

:D
Somehow, I hear banjos in my head when I read that. ;)
-
@Mr. Whippy said:
@Mr. Whippy said:
[quote author=Mr. Whippy link=topic=53984.msg1054953#msg1054953 date=1426694464]
Huh. I've never thought to use a snap cap in a shot gun. Snap caps are important for rimfire, but I thought all modern centerfire (and a shotgun is really just another kind of centerfire) were fine to dry fire. Maybe that's not true, but I've dry fired a lot of shotguns a lot of times and have never had a firing pin problem.
Regardless, I'd probably just make my own "snap cap" out of an old shotgun shell.
On to another question:
When shoot clays, is there a significant disadvantage to using a 20 ga (in comparison to 12 ga), because there are fewer pellets going down range? I always sort of figured it was theoretical only, but maybe that's not true.
Regardless, I prefer the gentler kick of the 20ga.
Can't say as I have ever dry fired a shotgun.
Never seen a shotgun cap cap for sure. Learn something new everyday.
At the end of the day, do you fire off the last shells or do you rack them out? If you rack them out, how do you relieve trigger pressure?
Like keep my shotgun unloaded?

:D
Somehow, I hear banjos in my head when I read that. ;)
[/quote]That's funny.
-
this thread is deceiving... I was expecting far more of this:

:P
-
I have shotgun caps like the ones below.

They are really designed for people who store their gun assembled. You put them in and fire the gun. Unfortunately after a few times they begin to crack.. (especially if you take the gun apart and try to fire the pins using them, hitting the plastic instead of the metal...
)A used cartridge sound like a good idea, but, if you get into the habit of firing your gun with them to relieve the pressure on the springs (many people do that) there is always the chance that you will get a loaded cartridge/shell accidentally and use that since they look the same.
On most modern double barrel shotguns when you take the gun apart for storage you also cock, automatically, the pins. When I take the gun apart I use a piece of hard plastic to fire the pins which I keep in the case.
With respect to the springs getting damaged (softening or breaking) if kept under pressure/tension opinions vary. Some say it does not matter (and from a purely theoretical physics point of view it should not affect them) but, as we know when we leave a knife backspring "loaded" to soften it, if you do it the spring softens. I believe that this is because some microcracks happen in the spring, making it weaker.
With respect to dry firing your pins, the issue is twofold - you may damage/distort/break the pins OR make the hole through which they stick out larger by letting the fire through it without anything to stop it. It all depends on the size of the pins, the overall firing system, the quality etc.
Personally I always like to release the pressure on the springs, gently, especially on older and/or handmade guns where it may be very hard to find a replacement spring
-
@Mr. Whippy said:
When shoot clays, is there a significant disadvantage to using a 20 ga (in comparison to 12 ga), because there are fewer pellets going down range? I always sort of figured it was theoretical only, but maybe that's not true.In my opinion, it's theoretical. I've broken way too many clays with my 20ga pump gun. There are many speSmurfpillst trap and skeet guns chambered for 28ga, as well as many dedicated upland bird guns also chambered for the 28. I feel that the smaller guns handle easier than a 12, though this is in the case of shotguns like my old Stevens pump that were built specifically for the smaller shell and are lighter and a bit more graceful than a 12.
-
@dks said:
With respect to the springs getting damaged (softening or breaking) if kept under pressure/tension opinions vary. Some say it does not matter (and from a purely theoretical physics point of view it should not affect them) but, as we know when we leave a knife backspring "loaded" to soften it, if you do it the spring softens. I believe that this is because some microcracks happen in the spring, making it weaker.I personally am not sure where I fall on this. I do know the springs will weaken with use. Being compressed and decompressed over and over again. As far as leaving a spring compressed goes I do not think you can compare a knifes back spring and a firearms magazine or firing pin spring as one in the same. They are completely different springs and will react differently. All I know is people have found 1911 magazines fully loaded from World War 1 and fired them through a 1911 without issue. Take it for what it is, but that's a looooong time to have a spring compressed and it functioned perfectly. Now think about how much better the metal and springs are we are using now a days and you should not have any problems leaving a spring compressed. With all this said I still release any spring tension like on a striker fired pistol, but theoretically you should be good either way.
As far as snap caps go I never use them and probably never will. I can see the need for rimfire, but I still do not use them. For center fire I guess it is possible to cause damage to the hole that the firing pin protrudes from, but honestly I have never seen it happen and it is not a issue for me. I'm not saying snap caps are not a good idea though.
-
I bought them so that I could safely practise loading the shotgun for competition down the road...in my home. Not all that keen using used shells....from a safety standpoint.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login