firearms
-
Last two Colt 1911s I had didn't work new out of the box. One of them wouldn't even chamber; had an undersized breach face that wouldn't allow a round to chamber. Obviously never test fired. That pretty much soured me on both 1911s and Colt. Did shoot a Kimber 1911 a few years back. Very nice, but not enough to buy one.
One of the local ranges had a CZ P07 for rent. Shot it a number of times. Very accurate and dead-on. So picked one up. Mine had groups 3-4 times larger and substantially low and to the left. Some times I'm snake-bit. So back to the CZ 75 Shadow and the HK USP.
-
Got it. Going to do something with the steel ones then. I won't waste my time with them from now on. I am going to use the rest of my Russian ammo for my black badge course...so I won't have to worry about picking them up. Guess I won't be saving a few bucks buying Barnaul 9 mm in the future from this point on.

-
@ColoSwiss said:
Last two Colt 1911s I had didn't work new out of the box. One of them wouldn't even chamber; had an undersized breach face that wouldn't allow a round to chamber. Obviously never test fired. That pretty much soured me on both 1911s and Colt. Did shoot a Kimber 1911 a few years back. Very nice, but not enough to buy one.One of the local ranges had a CZ P07 for rent. Shot it a number of times. Very accurate and dead-on. So picked one up. Mine had groups 3-4 times larger and substantially low and to the left. Some times I'm snake-bit. So back to the CZ 75 Shadow and the HK USP.
I had heard some stuff about Colt...very sad. Mine are Early 80's-90's and the bulk of mine in the past were Series 70's guns. Out of 20+ Colt 1911s (Govts, Commanders and Gold Cups), never a bad one...never.
I strayed and bought a different 1911 brand only once....the old timers will probably remember MS Safari Arms. Shot three rounds out of it....on the 3rd shot, the front red insert flew out and the hammer fell to half cock. It went back the next day and I had my traded in stock Government Model back in my hands.
Now, that ain't to say I didn't mix in some Browing HPs, Smiths, Colts and Rugers occasionally! :D
-
@captain spaulding said:
Brass. Never heard of steel cases reloaded....no elasticity like brass.
This. ^^^
Just toss the steel case stuff.
Getting steel cases stuck in your nice new SDB won't be enjoyable. Throw them away. I wouldn't recommend reloading aluminum cases either. 9mm brass is easy to come by, perhaps the easiest brass to find.
-
Last two Colt 1911s I had didn't work new out of the box. One of them wouldn't even chamber; had an undersized breach face that wouldn't allow a round to chamber. Obviously never test fired. That pretty much soured me on both 1911s and Colt. Did shoot a Kimber 1911 a few years back. Very nice, but not enough to buy one.
One of the local ranges had a CZ P07 for rent. Shot it a number of times. Very accurate and dead-on. So picked one up. Mine had groups 3-4 times larger and substantially low and to the left. Some times I'm snake-bit. So back to the CZ 75 Shadow and the HK USP.
I had heard some stuff about Colt...very sad. Mine are Early 80's-90's and the bulk of mine in the past were Series 70's guns. Out of 20+ Colt 1911s (Govts, Commanders and Gold Cups), never a bad one...never.
I strayed and bought a different 1911 brand only once....the old timers will probably remember MS Safari Arms. Shot three rounds out of it....on the 3rd shot, the front red insert flew out and the hammer fell to half cock. It went back the next day and I had my traded in stock Government Model back in my hands.
Now, that ain't to say I didn't mix in some Browing HPs, Smiths, Colts and Rugers occasionally! :D
Had a Series 70 9mm that was so accurate I had custom sights installed. Decided in a weak moment it was too large and heavy for the load and the mag capacity, so sold it. :ahhh
The CZ Shadow came along later and is a good replacement. Live and learn (sometimes).
-
Last two Colt 1911s I had didn't work new out of the box. One of them wouldn't even chamber; had an undersized breach face that wouldn't allow a round to chamber. Obviously never test fired. That pretty much soured me on both 1911s and Colt. Did shoot a Kimber 1911 a few years back. Very nice, but not enough to buy one.
One of the local ranges had a CZ P07 for rent. Shot it a number of times. Very accurate and dead-on. So picked one up. Mine had groups 3-4 times larger and substantially low and to the left. Some times I'm snake-bit. So back to the CZ 75 Shadow and the HK USP.
I had heard some stuff about Colt...very sad. Mine are Early 80's-90's and the bulk of mine in the past were Series 70's guns. Out of 20+ Colt 1911s (Govts, Commanders and Gold Cups), never a bad one...never.
I strayed and bought a different 1911 brand only once....the old timers will probably remember MS Safari Arms. Shot three rounds out of it....on the 3rd shot, the front red insert flew out and the hammer fell to half cock. It went back the next day and I had my traded in stock Government Model back in my hands.
Now, that ain't to say I didn't mix in some Browing HPs, Smiths, Colts and Rugers occasionally! :D
Had a Series 70 9mm that was so accurate I had custom sights installed. Decided in a weak moment it was too large and heavy for the load and the mag capacity, so sold it. :ahhh
The CZ Shadow came along later and is a good replacement. Live and learn (sometimes).
The CZ designs are solid...always wanted to try a 75!

-
@captain spaulding said:
Took apart the Remington 870 shotgun tonight and boy, what a mess it was. Learning quickly that sometimes, the local gun shop is a mess. I got the shotgun back from the local shop after they had to use a Dremel on two dimples inside the magazine tube. Once gone, it allows full access to the extension tube.
Well, got the shotgun back and took it out to the range, and damaged the second factory red dot sight. Noted after a few rounds something was really off. It felt like there was a lot of sand in it. I quickly stopped and thought to myself...no he didn't did he?
Well tonight was the first time I was able to take it apart. Man oh man, you should have seen the metal shavings. The local shop Dremeled away the two dimples alright, without taking the magazine tube off, or shoving any thing in the tube to catch metal shavings. Consequently, all that crap went into the action.

After a good half hour of TLC, the shotgun is feeling better than ever. To whoever did that to my shotgun....

All I keep hearing from you is people at the gun stores doing idiotic things to your guns or just plain acting like dumb asses. If I were you I would stay far away from having anyone work on your firearms unless it is completely necessary. I'm not lecturing you, but you should be doing these simple things yourself. Again, I am not trying to be rude.
Maybe I don't get out much, but don't hear too many gunsmith horror stories in my parts. A bad gunsmith can ruin the rep of a shop and destroy the business pretty quickly. I'm sure there's always gonna be unhappy customers, but this kind of thing is really surprising to me.
Sent from my iPhone using Tapatalk
-
When I get into something, I am not the most knowledgeable sort around on the topic. I tend to depend on those I think are more knowledgeable than I am...that is until I quickly ramp up to speed. I am also the type to read and do extensive research on things. I am a quick learner.
Unfortunately, I still have to depend on the local gun shop for some things. They still have a set of Hi-Point mags on order for me (who knows when those will come in), and a Trueglow red dot sight that should be replaced sometime soon (I hope).
Likewise, they are the only local place to buy things...that is if I would like to stroll into a store and buy things direct. I may have to move my operations online more, or make an other trip to Sudbury.
Their bonehead antics have caused me to buy my last 2 rifles from out of town.
Yes, I am learning. I have talked to several club members, and some of those guys have boycotted the local gun shop since the mid 90s. :ahhh
Anyhow, going to log off, got a full day ahead at the club.

-
Last two Colt 1911s I had didn't work new out of the box. One of them wouldn't even chamber; had an undersized breach face that wouldn't allow a round to chamber. Obviously never test fired. That pretty much soured me on both 1911s and Colt. Did shoot a Kimber 1911 a few years back. Very nice, but not enough to buy one.
One of the local ranges had a CZ P07 for rent. Shot it a number of times. Very accurate and dead-on. So picked one up. Mine had groups 3-4 times larger and substantially low and to the left. Some times I'm snake-bit. So back to the CZ 75 Shadow and the HK USP.
I had heard some stuff about Colt...very sad. Mine are Early 80's-90's and the bulk of mine in the past were Series 70's guns. Out of 20+ Colt 1911s (Govts, Commanders and Gold Cups), never a bad one...never.
I strayed and bought a different 1911 brand only once....the old timers will probably remember MS Safari Arms. Shot three rounds out of it....on the 3rd shot, the front red insert flew out and the hammer fell to half cock. It went back the next day and I had my traded in stock Government Model back in my hands.
Now, that ain't to say I didn't mix in some Browing HPs, Smiths, Colts and Rugers occasionally! :D
:)I've had a Colt Combat Commander and Government Model both 70 series from the late seventies. Both of those were modified By James Hoag. No longer have either of those now. My present 1911 is a stock Springfield Loaded of wich I've put an extractor and firing pin stop from Wilson Combat in it. The main problem with the 1911 is its popularity. To many manufactures, gunsmiths and after market accessories that are designed to sell but dont work well have tarnished its reputation. Given a good 1911 and a good gunsmith who knows what they are doing to maintane it. It is my choice in an semi-auto pistol. Why a good gunsmith? If you shoot a lot you will need maintance work on it to keep it running good just like your car. I'm not against other semi-autos there are some good guns out there. Dont tell any one but I do like some of the combat tupperware out there. It just took me 20+ years to get there. :D :D
-
You could just get a Glock or CZ and skip the whole hassle.
-
@HarleyXJGuy said:
You could just get a Glock or CZ and skip the whole hassle.A Glock has too high a grip angle for me to point shoot....been using 1911s for too long.
Used to be able to draw and point shoot a double tap into the bull at 10 yards in under a sec but that was 10 years ago. I maybe shoot 10 rounds a year now. :(
-
You could just get a Glock or CZ and skip the whole hassle.
A Glock has too high a grip angle for me to point shoot....been using 1911s for too long.
Used to be able to draw and point shoot a double tap into the bull at 10 yards in under a sec but that was 10 years ago. I maybe shoot 10 rounds a year now. :(
Well as you know the CZ is your cup of tea then.
Seeing how you are not shooting much maybe we should work out a sale?
-
You could just get a Glock or CZ and skip the whole hassle.
A Glock has too high a grip angle for me to point shoot....been using 1911s for too long.
Used to be able to draw and point shoot a double tap into the bull at 10 yards in under a sec but that was 10 years ago. I maybe shoot 10 rounds a year now. :(
Well as you know the CZ is your cup of tea then.
Seeing how you are not shooting much maybe we should work out a sale?
You looking to sell your CZ? :D
-
First day over for the IPSC black badge course. It was a blast. I was feeling a bit bad about myself seeing how most of the other guys were shooting (I had to re-do a few of the exercises throughout the day due to misses), that was until I talked to a few of them, and found out they had been shooting for years. There were 3 or 4 newbies, and I think I was the most junior in experience to all of them. I got most of the forms and ideas real quick, but my accuracy wasn't where I would like it to be (my fifth time out with the M&P), especially at the farthest distances. I also tend to shoot low (my nemesis to-date), but with that said, I am sure it will come with practice.
They want us back tomorrow at 9 am sharp to start. I am thinking of going earlier to get some practice in.

-
Congrats on completing your first day.
-
Thanks.

-
@Chako said:
First day over for the IPSC black badge course. It was a blast. I was feeling a bit bad about myself seeing how most of the other guys were shooting (I had to re-do a few of the exercises throughout the day due to misses), that was until I talked to a few of them, and found out they had been shooting for years. There were 3 or 4 newbies, and I think I was the most junior in experience to all of them. I got most of the forms and ideas real quick, but my accuracy wasn't where I would like it to be (my fifth time out with the M&P), especially at the farthest distances. I also tend to shoot low (my nemesis to-date), but with that said, I am sure it will come with practice.They want us back tomorrow at 9 am sharp to start. I am thinking of going earlier to get some practice in.

Excellent!
Tonite is where you can make some progress doing dry fire while the shooting you did today is still a fresh memory.
-
I got at the range an hour early to get some much needed practice time. I couldn't figure out what I was doing wrong yesterday, as I was shooting a lot better when I go alone. I then looked back at what I changed and figured out that I was wearing a cheap pair of plastic safety glasses...the type that are designed to fit over prescription glassware. These caused me nothing but problems with distortions, glares, and haze.
Well I took them off and I was shooting a lot better. So well that I wasn't asked to re-do any stages today. I passed the course. Now I have to shoot a sanctioned match, send in my info card, and I will be sent a black badge.

Hmmm...I have had 8 soft strikes on 8 separate 9 mm rounds. I was shooting Barnaul, which is made in Russia. Not sure if the ammo is the issue, or my M&P. Going to try something different and see if it still persist. If not, then it is the ammunition. I think I will be staying away from this stuff anyways as I found out recently you can't re-use the casings...and it is only 2 dollars cheaper than the Remington's that use brass casings.
-
Sounds like your making good progress Dan!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login