Leatherman quality control.
-
@shamus said:
The stories on the declining nature of Leatherman's quality control are anecdotal, but numerous enough to give one pause.
Were they made better back in the old days? All I can say is that I have a original Supertool that has been used and abused for 20 years and it's still working. There was a time where it was accidentally left outside overnight in the damp grass. I found it the next day and brought it inside, and promptly tossed the wet tool in a drawer without cleaning it. When I checked on it some time later, it hadn't rusted.
I don't know if they were made better but I like the old designs better. I am talking about the minitool and I freaking love it! A full set of pliers that fit in to the fifth pocket.

And yes I know it is off topic but I just had to do it. :D
You're excused. :D And I agree.

-
Greetings OP,
I've been carrying a Skeletool for a little over three years now, and I haven't had nary a problem with my plier jaws.You say you keep breaking them when bending things. Are you twisting the plier head while bending? The Skeletool's jaws are rather narrow so that the tool fits comfortably in a pocket, so they're not really made to be twisted. When bending something, you should grab it end-on and move the tool as if you are turning a bolt, rather than grabbing the work perpendicular and twisting along the long axis of the tool. Remember that this is a thin bit of stainless steel, and it will give before a hardened steel bolt.
-
@av8r1 said:
Greetings OP,
I've been carrying a Skeletool for a little over three years now, and I haven't had nary a problem with my plier jaws.You say you keep breaking them when bending things. Are you twisting the plier head while bending? The Skeletool's jaws are rather narrow so that the tool fits comfortably in a pocket, so they're not really made to be twisted. When bending something, you should grab it end-on and move the tool as if you are turning a bolt, rather than grabbing the work perpendicular and twisting along the long axis of the tool. Remember that this is a thin bit of stainless steel, and it will give before a hardened steel bolt.
The breaking of the pliers where my fault.
Indeed the skeletool pliers are rather thin.
If you carry a skeletool you should teach your self not to twist the plier head.
In my case it was a a regular wood screw. put the screw in the cut out for bolts and twisted the screw.
But it still snapped even though it was close to the joint.
Conclusion: skeletool pliers are thin an not made for bending things. (never recommend bending things with MT)That is also the reason why i switched to rebar.
If i need a set of pliers i want the to be capable of doing some serieus stuff. -
Although the fit and finish on my Leatherman tools has never been as good as anything from Victorinox, durability has never been an issue for me. I owned an original Leatherman PST and after that got stolen purchased a Wave. Although I generally prefer Victorinox to Leatherman and would definitely like to get a Swisstool Spirit X someday, I would not fault Leatherman's quality. You must have had an incredible run of bad luck with your tools.
-
I wouldn't recommend bending with the hard wire cutter notch on any Leatherman pliers, as it's made to shear rather than to bend. That's a good way of damaging the tool in a way that the warranty wont' cover. When bending, I recommend using the needle nose section, and using a bolt-turning motion like I discussed rather than a twisting motion.
Wood screws (and in fact most threaded fasteners) are made of heat treated steel that is much harder than the cast stainless steel these tools are made of. Something like the rebar with their carbide cutters might be up to cutting hardened steel, but be aware of the force you're putting into the tool.
I've done some pretty heavy stuff with my Skeletool, but when bending stuff with a twisting motion I usually use the Wingman or Wave and their wider jaws. For really heavy jobs, I break out the box brake I built.
-
I've broke a leatherman, but I was abusing it. They're are good, but that's not the same as invincible.
-
I recently purhased a brand new TTI from a store here in South Africa. I have found that both main blades are gritty and difficult to open, I tried a bit of oil, but does not help. I do not want to return it to Leatherman RSA, as they replace units with refurb units. These sometimes have scratches and marks on them. I can see that there is only one copper washer between the frame and the blade, and not one on the handle side. Would it improve it by adding one on that side?<br />
<br />
I also have a Charge Al and Alx, and do not have this issue, blades open smooth, but i see there are washers on both sides of the main blade.<br />
<br />
Greetings from South Africa.Sent from my iPad using Tapatalk HD
-
I've said plenty of times before, I have had more than my fair share of quality issues with Leatherman, and actually came to believe for a while that any "B Grade" goods in the factory were destined for overseas sale rather than rejected or rectified. These days I just think they're bloody sloppy ::) The first two tools I bought of theirs were unquestionably defective (not just design issues), and I have had others since then, and heard of plenty more.
I DO NOT associate the brand name with a high quality reliable product!
I have several Leatherman tools that I own, like and use. These tend to be older models (from back when they cared about quality), or ones where I have done some modification. If I was to look for a new multitool for someone today the first brands I would consider are Victorinox and Gerber.
Victorinox does occasionally let the odd lemon out of the factory, but these are rare. Gerber are more hit and miss with their QA, probably on a par with Leatherman in my opinion, but their tools are often better priced, and generally offer better value for money in my opinion. As for SOG, my current perspective is that the odds of them getting something right, is about on a par with the odds of Victorinox getting something wrong.
-
@hugos said:
I recently purhased a brand new TTI from a store here in South Africa. I have found that both main blades are gritty and difficult to open, I tried a bit of oil, but does not help. I do not want to return it to Leatherman RSA, as they replace units with refurb units. These sometimes have scratches and marks on them. I can see that there is only one copper washer between the frame and the blade, and not one on the handle side. Would it improve it by adding one on that side?<br />
<br />
I also have a Charge Al and Alx, and do not have this issue, blades open smooth, but i see there are washers on both sides of the main blade.<br />
<br />
Greetings from South Africa.Sent from my iPad using Tapatalk HD
Can you not write and ask for a new replacement as it is a new product. Surely a phone call or email could do the job.
Re the Charge TTi, the ones I have worked with don't come with washers between the tools and handle slabs.
If you have the tools, it isn't difficult to dismantle everything. A clean and maybe a quick polish and it should work well. -
@50ft-trad said:
I've said plenty of times before, I have had more than my fair share of quality issues with Leatherman, and actually came to believe for a while that any "B Grade" goods in the factory were destined for overseas sale rather than rejected or rectified. These days I just think they're bloody sloppy ::) The first two tools I bought of theirs were unquestionably defective (not just design issues), and I have had others since then, and heard of plenty more.I DO NOT associate the brand name with a high quality reliable product!
I have several Leatherman tools that I own, like and use. These tend to be older models (from back when they cared about quality), or ones where I have done some modification. If I was to look for a new multitool for someone today the first brands I would consider are Victorinox and Gerber.
Victorinox does occasionally let the odd lemon out of the factory, but these are rare. Gerber are more hit and miss with their QA, probably on a par with Leatherman in my opinion, but their tools are often better priced, and generally offer better value for money in my opinion. As for SOG, my current perspective is that the odds of them getting something right, is about on a par with the odds of Victorinox getting something wrong.
That assessment seems to be spot on.
Sent from my iPhone using Tapatalk
-
I have three Leathermans.
They are all perfect.
I am happy.
:) -
I have one Leatherman.
It broke.
I am not happy.:(


-
Yeah they do not care much about customer service. They're warranty is great.
But i have needed it on every tool I've owned. Except my wave and MUT.I guess that if you grind the leatherman logo of the tool and gave it to someone who is not in to MT s he will probably say it is an convienent invention, but of you have them a Vic after that i think i will know the outcome.
If you forget the brand and examine the products like they are brand less they are not that good as every body is raving about.
-
As I've said many many times before, I don't think anyone at LM is actually looking at these tools before they go to packaging.
If each tool were examined as I know Victorinox DOES, there would still be warranty issues, just not nearly as many.
So I hope you're taking note LEATHERMAN:
LOOK at the product instead of just blowing it out the door.

BRING BACK the PST

-
I purchased over 100 leathermans since I joined MTO, the only QC issues I had was With Waves. Everything else was perfect.
-
@Kampfer said:
I purchased over 100 leathermans since I joined MTO, the only QC issues I had was With Waves. Everything else was perfect.For me, it was only when I bought my Wave that I thought "maybe they do make some decent tools after all" :D It's the inconsistency that is so frustrating. It's a bit of a lottery, and an expensive one too. I might buy another Leatherman from someone I trusted here, but am very unlikely to get anything of theirs retail (unchecked by someone knowledgeable)
-
Yeah in comparison to my other leathermans the wave was pretty good. But i had to loosen all the torx screws and spent allot of time adjusting the knife pivot so that it stopped turning with the knife because if it goes with the knife it is hard to open.
These kind of things drive me nuts. :ahhhI also don't see leatherman as a quality brand, more as a brand that has made a good invention.
There are others that can build them better.A watch is made like a Victorinox, not as a leatherman. If your watch is build like a leatherman you have a problem.
The tread is Swiss made :D
-
Let's not forget We are talking about MT here, not watches.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
