Sharpening, discuss.
-
@Steinar said:
It really boils down how much steel you are willing to throw away to get an edge and the quality you need for that edge. For a knife that needs a new edge, I simply use a sharpie to mark the edge to easier see where I actually remove material. For the actual sharpening, I use a Spyderco Sharpmaker. That said, I sometimes use a pull-through (ceramic for touch-up, carbide for reshaping); you just need to think about what you're doing. Seems the cap has his work cut out for him here. :DI have seen knives ruined with pull-through sharpeners, an activity for which they are perfectly suited, but it's not like the edge spontaneously disintegrates just because the ceramic rods which do the sharpening is placed closer together than on the Sharpmaker... ;)
I'm clumsy, lazy and impatient, so I take all the help I can get when I sharpen my knives. The diamond rods to reshape new blades with ridiculously obtuse edge angle was one of my better buys. Trying to reshape an edge with one of the ceramic hones on a Sharpmaker is an exercise in futility. (Getting the super-fine rods to polish edges wasn't too dumb either.)
This
other tips are do your sharpening where there is good light 
-
Me too. :D
I've got a Lanksy Standard 3-stone set and while it's good for deep blades it's a PITA for SAKs. Mostly I just use the stones freehand, and try to gauge the angle by eye. I've also got a Victorinox pocket sharpener which is only good for touch ups and serrations. I reckon a Sharpmaker would suit me better, but I can't really see the difference between that and spending 1/3 of the cost of the Spyderco on a Lanksy 4-rod turnbox.
-
@HarleyXJGuy said:
A lot of good stuff here WolfenStein and this reminds me I need one more UF rid for my SM.Accidentally bought a single of Amazon. Who needs just one rod for a SM?
Oh! I know this one! A guy who only own chisel ground blades! Did I win anything? ;)
-
Even if you only have chisel ground blades, don't you need to take the burr off the back?
I've got a Lanksy which taught me how to sharpen but is a faff and I don't use it much. Most sharpening is done freehand on a cheap and crude 4 sided diamond block. It's quick and easy. At work touchups are done with a stone that lives there that I found in a cupboard, and if I'm really desperate we've got a small belt sander cum furry wheel thing for doing cow hoof knives.
-
@Sparky415 said:
This
other tips are do your sharpening where there is good light 
Absolutely.
I find it helpful to see where light reflects from the edge. Light should only be reflected from the flat edges where the hones remove stock, not from the actual edge, that would be chipping and edge rolling that has to be fixed. (Not sure if this was understandable. I rotate the knife under god light, for a knife with a Scandi grind and no secondary bevel, then light would first reflect from the side of the blade, then the side of the edge, then the other side of the edge, then the other side of the blade. If I see small points reflecting light between the sides of the edge, then I know the edge is damaged there. Sorry about the very clumsy language, wasn't sure how to get this across.) -
I am a sharpening noob.

Me too. :D
I've got a Lanksy Standard 3-stone set and while it's good for deep blades it's a PITA for SAKs. Mostly I just use the stones freehand, and try to gauge the angle by eye. I've also got a Victorinox pocket sharpener which is only good for touch ups and serrations. I reckon a Sharpmaker would suit me better, but I can't really see the difference between that and spending 1/3 of the cost of the Spyderco on a Lanksy 4-rod turnbox.
If you're willing to customize your box and if you don't encounter many serrations there is no reason
-
This
other tips are do your sharpening where there is good light 
Absolutely.
I find it helpful to see where light reflects from the edge. Light should only be reflected from the flat edges where the hones remove stock, not from the actual edge, that would be chipping and edge rolling that has to be fixed. (Not sure if this was understandable. I rotate the knife under god light, for a knife with a Scandi grind and no secondary bevel, then light would first reflect from the side of the blade, then the side of the edge, then the other side of the edge, then the other side of the blade. If I see small points reflecting light between the sides of the edge, then I know the edge is damaged there. Sorry about the very clumsy language, wasn't sure how to get this across.)I understand that perfectly, if you are outside get the sun behind you ;)
I also find a magnifying glass helps me a lot (but that’s just me :-[ ) -
I have a variety or whet stones and diamond hones, always done freehand but I'm thinking of trying a sharp maker soon, maybe.
-
I am a sharpening noob.

Me too. :D
I've got a Lanksy Standard 3-stone set and while it's good for deep blades it's a PITA for SAKs. Mostly I just use the stones freehand, and try to gauge the angle by eye. I've also got a Victorinox pocket sharpener which is only good for touch ups and serrations. I reckon a Sharpmaker would suit me better, but I can't really see the difference between that and spending 1/3 of the cost of the Spyderco on a Lanksy 4-rod turnbox.
I have an Swisstool but the blade is the same as a SAK.
I use the slanky sharpening system, it works the same as the sharpmaker.
But it is a a third of the price.Gets it razor sharp, and works just as good as the sharpmaker of a friend of mine.
I never had succes with a stone, probably because i have a crappy stone, but the lansky system/sharpmaker has a set angle. It is much easier and gets it hair popping sharp.
-
@Sparky415 said:
I understand that perfectly, if you are outside get the sun behind you ;)That's good advice.

I also find a magnifying glass helps me a lot (but that’s just me :-[ )
I bought a small loupe/jeweler's magnifier, but haven't figured out how to use it effectively when sharpening. So, I have ended up prefering a magnifying glass. :)
-
Another Spyderco Sharpmaker fan. Works on everything I need to sharpen.
-
I am a sharpening noob.

Me too. :D
I've got a Lanksy Standard 3-stone set and while it's good for deep blades it's a PITA for SAKs. Mostly I just use the stones freehand, and try to gauge the angle by eye. I've also got a Victorinox pocket sharpener which is only good for touch ups and serrations. I reckon a Sharpmaker would suit me better, but I can't really see the difference between that and spending 1/3 of the cost of the Spyderco on a Lanksy 4-rod turnbox.
I have an Swisstool but the blade is the same as a SAK.
I use the slanky sharpening system, it works the same as the sharpmaker.
But it is a a third of the price.Gets it razor sharp, and works just as good as the sharpmaker of a friend of mine.
I never had succes with a stone, probably because i have a crappy stone, but the lansky system/sharpmaker has a set angle. It is much easier and gets it hair popping sharp.
Is this what you use ?
http://lansky.com/index.php/products/4-rod-turn-box/ -
I am a sharpening noob.

Me too. :D
I've got a Lanksy Standard 3-stone set and while it's good for deep blades it's a PITA for SAKs. Mostly I just use the stones freehand, and try to gauge the angle by eye. I've also got a Victorinox pocket sharpener which is only good for touch ups and serrations. I reckon a Sharpmaker would suit me better, but I can't really see the difference between that and spending 1/3 of the cost of the Spyderco on a Lanksy 4-rod turnbox.
I have an Swisstool but the blade is the same as a SAK.
I use the slanky sharpening system, it works the same as the sharpmaker.
But it is a a third of the price.Gets it razor sharp, and works just as good as the sharpmaker of a friend of mine.
I never had succes with a stone, probably because i have a crappy stone, but the lansky system/sharpmaker has a set angle. It is much easier and gets it hair popping sharp.
Is this what you use ?
http://lansky.com/index.php/products/4-rod-turn-box/Yup, that's the one.
For longer knives the rods may be a bit short but there is also a version with longer rods. For SAKs, MTs and bushcraft knives it works fine.Machetes may be a different story ???
-
I have a spiderco system and a lansky. However, I find myself to be better with basic whetstones then stropping with green paste, linen and leather. I originally learned on stones, the strop is more just the past year or so as I use a straight razor as well. Keeps things SHARP...
-
I am another disciple of the Sharpmaker. I have had several different stones etc. and have found the Sharpmaker to be easy to use, fairly quick, and obtain consistent shaving sharp edges with it!
-
I use my Sharpmaker to keep blades sharp but sometimes you need to create a new bevel and for this I use a Lansky or Warthog Multi edge.
http://www2.knifecenter.com/item/LSLKC03/Lansky-Standard-Knife-Sharpening-System
http://www2.knifecenter.com/item/WOWHS19/warthog-sharpeners-multi-edge-220
I use the Spyderco 99 times out of 100.
I went to a custom maker friend of mine last week to put a new bevel on my beater Endura, so much quicker with a belt grinder.
I also keep this little thing handy for SAKs
http://www2.knifecenter.com/item/LSLCKEY/Lansky-inchThe-Mini-inch-Crock-Stick-Knife-Sharpener -
wet stone and diamond stone user here.
I also have a mini lanksy ceramic rod for fast adjustments.
My father learn me how to sharpen on stone, i've improve his technique (he use a stone in left hand and knife in right hand, the angle isn't constant) and the used stones (he stop at 600 grit). -
When a knife gets too dull I just buy a new one.

Def
-
So there are a lot of different ways to sharpen your knives.
But the other question that should have been asked is how sharp do you make your knives.
Someone who is sharpening his knife with a strop wants it much sharper than someone who spends 20 seconds a week with a lansky sharpenIng kit.
Also blade steel is a big factor, softer steel gets touched up quick to razor sharpness and sv30 takes longer but holds that edge longer.I have a Swisstool so i have the regular SAK blade steel.
I dull my blade pretty quick because i sometimes cut material that is not supposed for a SAK blade. (Plastic bottles carpet etc..)
But most of the time bananas, apples, rope and i always cut the curry and mayo bottles open to get the last out.
I sharpen my knife once a week and do this on a cheap lansky sharpening system.
I make it hair popping sharp with the white ceramic rods.
I first Clean of all the gunk of the knife blade and then pull it about ten times over the lansky system.Then it is good for another week.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login