And so it begins.... (My adventures into Alox!)
-
I think that's my favorite thing you've made yet syph

-
That's bloody stunning mate :)
Sent from my K013 using Tapatalk
-
Yup, the more of these I see, the more I want my Rogueneer to get the Ti upgrade :)
Sent from my XT901 using Tapatalk
-
That's superb!
Aren't you worried about a galvanitic reaction between all the dissimilar metals seizing it all together though ;) ;) -
Be A U ti FUL!

-
@neillcurrie said:
That's superb!
Aren't you worried about a galvanitic reaction between all the dissimilar metals seizing it all together though ;) ;)If the Al and Cu were touching yes, but since the Al is anodized its non conductive. The Ti is pretty well inert so maybe the copper would oxidize faster? Not sure really but we'll see what happens. :D
-
This is a none backscale cutout build so it has the awl on back for blade layer.

Do you have a hidden 4th pin for holding the back springs that have back side tools? I would like to try putting a multitool hook in an 84mm alox.
Yes I drill into the scale of each side about 2 mm with carbide PCB circuit board drill bit of 2.2mm and that works perfect.
84 alox scales are too thin to sink a hole that far but you might be able to get it deep enough to work if you use a 2.2mm endmill after first spotting the hole with a standard pointed drill bit.
-
Now for the next step: embedding a 1 carat diamond into the Tweezer copper end

-
@neillcurrie said:
Now for the next step: embedding a 1 carat diamond into the Tweezer copper end

Good guess! But not diamond...
I'm practicing my gem setting first though. -
A couple of questions for you Syph, and maybe this was covered elsewhere, but what is required to put a small blade in a 93mm in place of the awl, is there a factory spacer that works?
And, is the file from a 91mm a direct drop in on a 93mm saw spring?
Thanks in advance, I'm trying to figure out what to send you for a custom, if you're willing and still taking 93mm requests.
:)
-
@twiliter said:
A couple of questions for you Syph, and maybe this was covered elsewhere, but what is required to put a small blade in a 93mm in place of the awl, is there a factory spacer that works?And, is the file from a 91mm a direct drop in on a 93mm saw spring?
Thanks in advance, I'm trying to figure out what to send you for a custom, if you're willing and still taking 93mm requests.
:)
A small blade is a wee bit thinner than the awl, so I make little washers to fill out the remainer of the space, but other than that they fit no problem.
91mm file works on the 93mm saw spring with no changes needed (other than making the pivot hole bigger).
:D
-
A couple of questions for you Syph, and maybe this was covered elsewhere, but what is required to put a small blade in a 93mm in place of the awl, is there a factory spacer that works?
And, is the file from a 91mm a direct drop in on a 93mm saw spring?
Thanks in advance, I'm trying to figure out what to send you for a custom, if you're willing and still taking 93mm requests.
i
:)A small blade is a wee bit thinner than the awl, so I make little washers to fill out the remainer of the space, but other than that they fit no problem.
91mm file works on the 93mm saw spring with no changes needed (other than making the pivot hole bigger).
:D
Thanks, will continue on PM...

-
I still have a decent stash of BO'd 93mm parts but they dont get asked for too often. Here is one I put together today on request. A good combination of tools in 3 layers. :D





-
Beautiful BO double blade Syph...even better on the 93mm frame so they can be on opposite pivots. Nice work.
-
Excellent work.

You had to go and ruin it with the combo tool though. :P
-
I got some more 91mm alox in. I machined a tweezer slot in a few this time. :D
I love this 4 layer setup. Lots of tools and still reasonable on thickness. Every layer has a backtool and no hook on scissors layer for the hook haters either... :D
CNC machined 6061 Al scales
Black hard anodized
Brass liners
Brass Nub on tweezers- combo tool / main blade / phillips
- metal file / chisel
- wood saw / fine driver
- scissors / awl







-
I forgot the customer wanted the wire cutter mod to the scissors so I added that. Id never tried it before but wow it does actually cut wire pretty darn good.



-
Just made it through this entire thread. Amazing work, Syph. I'm inspired. Seeing as how you don't work on 84mm, I may take a stab at modding my Cadet. If I may ask, can the saw from a 84mm Lumberjack replace the blade in a Cadet. Usually the saw in an 84mm pivots on the "fat" end. Will it work on the skinny the end in place of the blade?
-
@MachoGrande said:
Just made it through this entire thread. Amazing work, Syph. I'm inspired. Seeing as how you don't work on 84mm, I may take a stab at modding my Cadet. If I may ask, can the saw from a 84mm Lumberjack replace the blade in a Cadet. Usually the saw in an 84mm pivots on the "fat" end. Will it work on the skinny the end in place of the blade?Wow you need a prize for reading the whole thread! :D The saw only works on the saw backspring as far as I know. Its not a tapered tools like a blade and its the same thickness the whole way, so its not a good tool to share with another tool in the same layer.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login