Quick Test: MTs vs. Bike Break Cable
-
Thanks for the insight

I'm surprised at the difference between the Surge and Rebar plier heads. Or am I
yes, I think I am. I'd expect a bit of inconsistency but not on that spectrum.MP600 is a shame. I'm pretty sure a fresh MP700 would romp through it, but develop pivot play (too) quickly due to the internal spring. I'd expect the unsprung MP600 to not develop pivot play as easily
Glad to hear about the Spirit. I wasn't altogether sure how it would fare with it being stranded despite not being soft fine strands (which is where it mainly struggles)
-
@sawman said:
What's this ??? Where's the SOG Powerlock to test
In the mail from you to me, maybe

No, the only SOG I own is a Pocket Powerpliers and CrossGrip.
Pocket Powerpliers: Eat the cable like it was spaghetti.
CrossGrip: Surprisingly, the cable did not get stuck, but I also did not manage to cut the cable and my hand hurts now (I gave up after the second try). I kinda feel that with a better grip it could do it, if I find some tubes that fit over the handle I might try again.
Also tested the Squirt: It got stuck really badly. Ultimately I used to pliers to grip the tip and open it. Only one try here.


-
@50ft-trad said:
Thanks for the insight
I'm surprised at the difference between the Surge and Rebar plier heads. Or am I
yes, I think I am. I'd expect a bit of inconsistency but not on that spectrum.MP600 is a shame. I'm pretty sure a fresh MP700 would romp through it, but develop pivot play (too) quickly due to the internal spring. I'd expect the unsprung MP600 to not develop pivot play as easily
Glad to hear about the Spirit. I wasn't altogether sure how it would fare with it being stranded despite not being soft fine strands (which is where it mainly struggles)
Rebar vs. Surge: Me too, I wish I had more than one, just to check if its manufacturing, but I don't. I can't detect any play with either pliershead.
The MP-600 has some minimal play to begin with (I estimate that I can move the tips of the jaws less than half a mm). How does the MP-600 do with soft fine strands?
-
@powernoodle said:
I guess the real issue is why you want to sabotage someone's bike. >:DWhat can I say, he was in my spot. That was my spots...

-
@enki_ck said:
Thanks for those tests, Beat.
...
SPIRIT
Being mocked for its "inferior" wirecutters I think it did perform best (although the difference to the Re-Charge is marginal). Because I think the difference between Surge and Re-Charge might be due to manufacturing tolerance I tested two more Spirits (I don't have more Surges, Charges, Waves or MP-600). Both of those Spirits showed the same result as the first one, cutting the break-cable effortlessly.Not surprised one bit.
You misread the "inferior" wirecutters comments. The Spirit and Swisstool are excellent wire cutters for hard wire, fencing wire, ... anything heavy duty. Where they fail is at cutting soft, stranded wire.Thanks for the attitude adjustment (wow, that is an obscure movie reference, ten points for house MT.O if you get it :P).
-
You meant squirt, not Micra :D
With my ST300, I do cut stranded wire regularly (clothesline) but use the handle side, special stranded wire cutters. the pliers cutters are not very good for that
-
@dks said:
You meant squirt, not Micra :DWith my ST300, I do cut stranded wire regularly (clothesline) but use the handle side, special stranded wire cutters. the pliers cutters are not very good for that
There is no proof I ever wrote Micra :P, also I wrote this in the morning BEFORE the alarm went off, so technically, I was still asleep.
I tested that with the Surge too (that is the same pliers-head, right?). It got stuck, so it might depend very much on the composition of your stranded wire. Or it might be manufacturing tolerance. Strangely enough, the Rebar pliers-head did cut it well with the pliers cutters.
-
How did the Surge go with the handle side stranded-wire cutters?

Thank you lol
Ps: "Brake" ;-)
Nonononono... it's break because it gives you a short break from your ultimate collision with death... or sumsing...

Oh and in case you missed the Surge handle side stranded-wire cutters test... it failed!
-
Thanks for those tests, Beat.

...
SPIRIT
Being mocked for its "inferior" wirecutters I think it did perform best (although the difference to the Re-Charge is marginal). Because I think the difference between Surge and Re-Charge might be due to manufacturing tolerance I tested two more Spirits (I don't have more Surges, Charges, Waves or MP-600). Both of those Spirits showed the same result as the first one, cutting the break-cable effortlessly.Not surprised one bit.
You misread the "inferior" wirecutters comments. The Spirit and Swisstool are excellent wire cutters for hard wire, fencing wire, ... anything heavy duty. Where they fail is at cutting soft, stranded wire.Thanks for the attitude adjustment (wow, that is an obscure movie reference, ten points for house MT.O if you get it :P).
Dazed and Confused?

-
Spirit FTW! :)
-
Thanks for your effort and the info

-
Thanks for those tests, Beat.

...
SPIRIT
Being mocked for its "inferior" wirecutters I think it did perform best (although the difference to the Re-Charge is marginal). Because I think the difference between Surge and Re-Charge might be due to manufacturing tolerance I tested two more Spirits (I don't have more Surges, Charges, Waves or MP-600). Both of those Spirits showed the same result as the first one, cutting the break-cable effortlessly.Not surprised one bit.
You misread the "inferior" wirecutters comments. The Spirit and Swisstool are excellent wire cutters for hard wire, fencing wire, ... anything heavy duty. Where they fail is at cutting soft, stranded wire.Thanks for the attitude adjustment (wow, that is an obscure movie reference, ten points for house MT.O if you get it :P).
Dazed and Confused?

The #1 enemy of the state is Edgar Friendly... Solid '90s action... lots of stars (Stallone, Snipes, Bullock)
-
@Etherealicer said:
The #1 enemy of the state is Edgar Friendly... Solid '90s action... lots of stars (Stallone, Snipes, Bullock)Demolition Man... Nice film.

-
Good work, E.

Was spannering one of my bikes tonight and thought I'd add my findings. Dug out a few multis and some brake cable to test - all ones that I feel would work in a bike tool kit, so the SwissTool is out. Got a Spirit, Rebar, Wave, MP400, Crunch and my new SwitchPlier 2. Also used my Park Tool cable cutters as a benchmark
First up, Park Tool CN-10

Very good clean cut, easy to grip and not a lot of force needed. No frayed ends.Next, SOG SwitchPlier 2.0

Disappointing. Didn't cut through and very hard on my hands when squeezing tight.Leatherman Crunch

Also disappointing. Didn't cut through, cable splayed sideways and got jammed between the jaws.Leatherman Wave

Didn't cut through on the first, second or third cut, eventually got it on the 4th. Frayed the ends, generally made a meal of it but did the job eventually.Gerber MP400

Very surprising, this one - I wasn't expecting much, but it cut through cleanly and easily on the first try. No frayed ends!Victorinox Spirit

Cut through first try but not as clean a cut as the Gerber. Expected better.Leatherman Rebar

The first cut I tried slipped out of the end of the cutters and one strand was left attached. I tried again, making sure the cable was held in place and this time got a good, if slightly uneven, cut. Uncomfortable to grip - the Wave was better.I also had a delivery of 2.2mm and 2.5mm brass rod today and needed to cut it up for storage. All of the pliers except the SwitchPlier handled the 2.5mm rod with ease - the SwitchPlier only got about 1/3 of the way through and I had to bend the rod to finish. All of them worked just fine on the 2.2mm, and I know from experience that the Spirit and Rebar both cut 3mm brass rod easily.
-
Wow!!! Great tests, thank guys!!!

-
@hiraethus said:
Good work, E.
Was spannering one of my bikes tonight and thought I'd add my findings. Dug out a few multis and some brake cable to test - all ones that I feel would work in a bike tool kit, so the SwissTool is out. Got a Spirit, Rebar, Wave, MP400, Crunch and my new SwitchPlier 2. Also used my Park Tool cable cutters as a benchmark
First up, Park Tool CN-10

Very good clean cut, easy to grip and not a lot of force needed. No frayed ends.Next, SOG SwitchPlier 2.0

Disappointing. Didn't cut through and very hard on my hands when squeezing tight.Leatherman Crunch

Also disappointing. Didn't cut through, cable splayed sideways and got jammed between the jaws.Leatherman Wave

Didn't cut through on the first, second or third cut, eventually got it on the 4th. Frayed the ends, generally made a meal of it but did the job eventually.Gerber MP400

Very surprising, this one - I wasn't expecting much, but it cut through cleanly and easily on the first try. No frayed ends!Victorinox Spirit

Cut through first try but not as clean a cut as the Gerber. Expected better.Leatherman Rebar

The first cut I tried slipped out of the end of the cutters and one strand was left attached. I tried again, making sure the cable was held in place and this time got a good, if slightly uneven, cut. Uncomfortable to grip - the Wave was better.I also had a delivery of 2.2mm and 2.5mm brass rod today and needed to cut it up for storage. All of the pliers except the SwitchPlier handled the 2.5mm rod with ease - the SwitchPlier only got about 1/3 of the way through and I had to bend the rod to finish. All of them worked just fine on the 2.2mm, and I know from experience that the Spirit and Rebar both cut 3mm brass rod easily.
Thanks for chipping in.
Appears that the replaceable wire-cutters on the MP-600 are not a benefit for every task. I should soon have one without too, so I will probably extend my test.
-
I love these kinds of tests :D :D
-
@Etherealicer said:
Thanks for chipping in.Appears that the replaceable wire-cutters on the MP-600 are not a benefit for every task. I should soon have one without too, so I will probably extend my test.
My pleasure.
I think the same of the replaceable cutters on the Rebar - definitely an advantage for some situations (hard wire, serviceability) but have disadvantages too (reduced gripping area, complexity, only come on a plier head with coarse teeth).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
