firearms
-
I can't wait to get that Norinco 1911 home.
I have given this some thought, and might want to do some IPSC competitions down the road with it. Thus I have started to accumulate the necessary gear.
So I bought a Bladetech Total Eclipse 1911 holster. It fits my Winchester 1911 BB handgun very snugly. I noticed the usual screw with rubber bushing...which means I can adjust the hold on the handgun. Perfect.

I also have 3 Uncle Mike Double mag belt holders designed for single stack magazines. Here is one with a pair of Remington 1911 magazines I also bought at the same time. These are a little lose at the moment, but like the holster, I can adjust the fit via a screw.

And the pair of Remington 1911 7 round magazines. This will give me 6 magazines to start off with. 2 come with the handgun, I also ordered a pair of Kimber 7 round magazines at the same time, and this pair of Remingtons. I have heard that some magazines are garbage. I figure I can try out a few from different manufacturers, and if I see some issues, I can discard those, or make them work somehow, and buy a few more that work better down the road.

I also now have 300 rounds of 45 ACP. I think that should be a good start. I also ordered another competition belt from a different seller. In the event that one doesn't come through, I should still get another sooner than later. If both come in, and I do hope they do, one will be configured for an M&P 9mm, and the other for a 1911 45 ACP.
Now it is a waiting game.

-
@Chako said:
I suppose. I have a tracking number for the belt now: RI575118700CNHowever, nothing shows up for it. I emailed the seller and he tells me I have to wait 5 days before it shows up on any tracking site. :think:
Just bought these last night off of eBay for the 1911 Norinco.
You might want to pick up some neoprene rubber grips for the 1911. Gives you a better hold.
http://www.brownells.com/items/1911-pistol-parts.aspx


-
I know about the Hogue grips which are popular. I have also seen a combination wood grip with rubber wrap around in a gun shop in Sudbury. Going to try the fancy grips and see if I like them.
I did find this interesting web site on cartridge comparisons.
-
Found these interesting 1911 web sites...
1911 FAQ:
http://blog.cheaperthandirt.com/faqs/1911-faqs/1911 Buyers Guide:
https://www.1911addicts.com/threads/buyers-guide-for-all-you-1911-addicts.511/1911 Disassembly:
http://how-i-did-it.org/detail-1911/field_strip.html -
@Chako said:
I know about the Hogue grips which are popular. I have also seen a combination wood grip with rubber wrap around in a gun shop in Sudbury. Going to try the fancy grips and see if I like them.I did find this interesting web site on cartridge comparisons.
Since '75, I've shot Pachmayr (rubber) GI issue (plastic), wood (checkered Cocobolo and walnut), smooth horn and smooth micarta...a lot of it is finding the ones you like, ones that fit you hand and work for you.
You might want some rubber grips to shoot competition and then dress it up when you get home....lots of guys do that. I have thin Pachmayr Signatures (house/travel) and smooth Colt signature Ivory Micarta (show off) on my two. The Ivory Micarta grips also shoot very well ...the micarta gets more grippy when your hand perspires a bit.
-
I know about the Hogue grips which are popular. I have also seen a combination wood grip with rubber wrap around in a gun shop in Sudbury. Going to try the fancy grips and see if I like them.
I did find this interesting web site on cartridge comparisons.
Since '75, I've shot Pachmayr (rubber) GI issue (plastic), wood (checkered Cocobolo and walnut), smooth horn and smooth micarta...a lot of it is finding the ones you like, ones that fit you hand and work for you.
You might want some rubber grips to shoot competition and then dress it up when you get home....lots of guys do that. I have thin Pachmayr Signatures (house/travel) and smooth Colt signature Ivory Micarta (show off) on my two. The Ivory Micarta grips also shoot very well ...the micarta gets more grippy when your hand perspires a bit.
VZ grips for me.
Check them out Chako, very grippy.
-
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
These guys are hard to beat for fancy wood grips.
-
Nice but very expensive. I gather many do not like my taste in grips. :D
Well in the process of cleaning some 9 mm brass found on the range (2 visit pick up). Thank you local police force and folks who don't roll their own ammo. At this rate, I may never have to buy brass again.
This is several hours in the rotary tumbler being attacked by corn bits.
Next step, my sonic cleaner full of Lyman Turbo Case Clean.
-
These guys are hard to beat for fancy wood grips.
Amazing site!
So what did you order SG?
Nothing, I'm fixed for grips in fact have more grips than guns now.....

Chako, I like 'em fine!

I'd put stag on mine if I could afford it but I reckon these will do..... :D
-
These guys are hard to beat for fancy wood grips.
Amazing site!
So what did you order SG?
Nothing, I'm fixed for grips in fact have more grips than guns now.....

Chako, I like 'em fine!

I'd put stag on mine if I could afford it but I reckon these will do..... :D
Gold Cup SG?
-
[quote author=buck link=topic=53984.msg1139173#msg1139173 date=1439903693]
These guys are hard to beat for fancy wood grips.Amazing site!
So what did you order SG?
Nothing, I'm fixed for grips in fact have more grips than guns now.....

Chako, I like 'em fine!

I'd put stag on mine if I could afford it but I reckon these will do..... :D
Gold Cup SG?
[/quote]Nah, I stupidly sold that! (
) Just a very early Series 80 that's a twin to a Series 70. Only diffs are a lowered ejection port and the firing pin safety. I swapped out the collet bushing for a Brown Precision solid one and bought the conversion kit to return it to a Series 70 firing pin config.I got rid of my GC because I kept walking out the Colt Elliason rear sight pin shooting hardball at the combat matches.....went with a fixed sight model.
-
As a Glock owner, I am jealous of 1911 owners for only one reason- your guns can wear jewelry. Love some of those scales. Cheapier than dressy grips for a revolver by a lot usually.
So, I don't normally comment in this thread, and I don't normally shill, but I got a gadgety bit in the mail today. http://www.mygtul.com/product/gtul-9mm40sw
I have small hands and shorter than proportional thumbs. As a result, it's hard for me get enough squeeze on a magazine body to clean it, and I have damaged a magazine to the point where all I could was salvage the baseplate, follower and spring after squeezing too hard with channel locks. Normally, getting a baseplate off is a three, four minute streak of swearing and grunting. This widget let me pull a magazine apart in under a minute, without swearing, and it isn't one of my half worn out KCIs but an almost brand new, loaded and fired twice OEM magazine I picked up last week. Seriously a better use of the money than a box of plinking ammo if you own a Glock.
-
Interesting. I didn't know they made an item like that. My M&P magazines come apart very easily. Just press the center button with something long like your grip retention rod, and slide the base plate out of the way meanwhile being carful to catch the spring and sub assembly before they fly out across the room. Yeah, my first disassembly was somewhat entertaining. :D
Edit. Yay! Looks like the 1911 is now on its way. Just got confirmation from Canada Post that it is in transit.
-
I can't wait to get my somewhat birthday gift in. I did get a letter from the RCMP stating ownership transfer of the Norinco 1911A1. Info from Canada Post tells me I should get it by next Wednesday if all goes right.
-
@Chako said:
Interesting. I didn't know they made an item like that. My M&P magazines come apart very easily. Just press the center button with something long like your grip retention rod, and slide the base plate out of the way meanwhile being carful to catch the spring and sub assembly before they fly out across the room. Yeah, my first disassembly was somewhat entertaining. :D+1
Maybe Glock magazines are assembled differently, but on most of my mags depressing a pin in a hole on the baseplate allows the baseplate to slide right off. A small screwdriver (or sometimes a small cleaning rod) is all that's needed. Reassembly can sometimes be tricky, with the magazine spring refusing to cooperate. The major thing though is to make sure you've reinstalled the follower correctly.
1911 mags can also be disassembled, though the process is substantially different and somewhat tricky. Just make sure you don't mess with the feed lips.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


