Work in progress: display cabinet
-
@Sparky415 said:
Very neat work and tidy work space there S
(that’s odd there’s a fused clock connector behind your frame
)If it looks tidy that can only be the result of very selective photography :) There's all sorts of junk piled up on there.
-
Rain all day today so no chance to get outside and do the final couple of routing operations that I need to do on the door. But despite my expectations it turned out to be a good day for the project... a parcel arrived :) Inside are the pieces of acrylic for the shelves and the window in the door. I ordered them cut to size from https://www.trentplastics.co.uk/ . It worked out the same price as buying a 6ft by 2ft sheet of acrylic from the local DIY store, but it saved me a lot of cutting, and they've done a far better job of polishing the edges than I could have.
It's only 3mm acrylic and quite flexible, so the shelves will need to be well supported. I have a plan for that.


-
I also had an idea about my escutcheon vexation: I'm going to try making one. This is just a test piece using some thin brass that I had. I've got some thicker brass plate on order. The design is etched using ferric chloride. It's not perfect but I think the idea is sound.
I'm contemplating whether I should fill in the etched area with some red enamel paint, or leave it as plain brass. Opinions?

-
@shibafu said:
I also had an idea about my escutcheon vexation: I'm going to try making one. This is just a test piece using some thin brass that I had. I've got some thicker brass plate on order. The design is etched using ferric chloride. It's not perfect but I think the idea is sound.I'm contemplating whether I should fill in the etched area with some red enamel paint, or leave it as plain brass. Opinions?
I think red enamel would look excellent!

-
Really looking forward to seeing this completed.

-
@shibafu said:
I'm contemplating whether I should fill in the etched area with some red enamel paint, or leave it as plain brass. Opinions?You could try with nail polish first to see how you like it*. I think red enamel would look splendid though brass has a yellow aspect and past certain proportions it doesn't match well with red, in my opinion. I assume the escutcheon will be placed in the middle of the door's cover?
- :D

- :D
-
@firiki said:
You could try with nail polish first to see how you like it*. I think red enamel would look splendid though brass has a yellow aspect and past certain proportions it doesn't match well with red, in my opinion. I assume the escutcheon will be placed in the middle of the door's cover?Well red nail polish is not really my style :) but I did find a small pot of red enamel in the cupboard so I've put some on my test piece. It seems to be taking a long time to set though, could be the paint is bad as it's very old. Hopefully it will set well enough to allow me to sand it off the raised areas and get an impression of how it looks.
The position is fixed by the dimensions of the lock, which will put it quite close to the edge of the door (13mm from the edge to the centre of the keyhole).
-
This and the next post are yesterday's work. First the last couple of routing operations on the door. A chamfer detail around the inside edge on the front, and a rebate to receive the window on the back.


-
This piece of 1/2" plywood will form the back panel, and the side shelf supports. I've routed 1/8" grooves across it that the shelves will slot into.
The plywood has been in the garage for a while and has grown a bit of mould. Not a problem though. I treated it with some fungicide to kill the mould, and the stain will be covered by paint.


-
The panel cut apart to form the side and back pieces. The second photo shows how they'll fit in the case.


-
Here's how the test escutcheon looks with the red enamel. I also had a try at cutting out the keyhole, with less than 100% success as you can see... it was a useful learning experience though, and I think it should be easier with the thicker brass that I'll use to make the real thing. Anyway I like the red and I think I'll go with it.

-
You could try with nail polish first to see how you like it*. I think red enamel would look splendid though brass has a yellow aspect and past certain proportions it doesn't match well with red, in my opinion. I assume the escutcheon will be placed in the middle of the door's cover?
Well red nail polish is not really my style :) but I did find a small pot of red enamel in the cupboard so I've put some on my test piece. It seems to be taking a long time to set though, could be the paint is bad as it's very old. Hopefully it will set well enough to allow me to sand it off the raised areas and get an impression of how it looks.
The position is fixed by the dimensions of the lock, which will put it quite close to the edge of the door (13mm from the edge to the centre of the keyhole).
I mentioned nail polish for two reasons, the first one was to save you money from buying enamel you might not use after all. The other reason (* :D
) was a couple of threads about nail polish on Alox SAKs.Anyway. I see you're going to make just the escutcheon as lock cover. I thought you'd be making it like the test piece, a square with the shield in it, in which case I'd go for plain brass and maybe add some etching for texture/reflection. The shield with enamel on looks tempting but only if it's quite small. :)
-
A little more progress: the striker plate for the lock installed, and cut out the keyhole.


-
Nice progress


-
Painting the back and inside panels with a light cream colour from my collection of old paint samplers...

-
I etched the thick brass sheet for the real lock escutcheon today, so thought I would share some info about the process.
Step 1 is to degrease the brass and then apply a resist to the areas that won't be etched. The method I'm using is toner transfer. You print the design on a laser printer, and transfer it to the brass using an iron. There are a number of variations on this idea. Using transparency film is one way I tried, but I had better results using glossy inkjet photo paper. After taping the design onto the brass, I applied the iron (set on max) first to the back of the brass for 20 seconds to preheat it, then turned it over (heat-proof gloves essential!) and ironed the paper onto the brass for about 10-15 seconds. Then I rubbed the paper down with a blunt instrument to make sure it's properly stuck. Finally you can soak the paper off in water, slowly rubbing it away in layers until you're left with just the toner stuck to the brass.
If there are any defects in the resist, supposedly you can patch them up with a permanent marker. I have to say I didn't find that to be completely effective. If you go too far with the marker then you can scrape it off again with a scalpel. And a SAK magnifier is handy to check the resist for defects :)
The second photo shows the setup for etching: protective equipment (gloves and eye protection); ferric chloride etchant; disposable plastic tray; a sponge; a bath of water to dunk the workpiece in when etching is finished; paper towels in case of any mess; bicarbonate of soda to neutralise the etchant before disposal; all on a trash bag to protect the work surface.
In the "sponge method" you use only a small amount of etchant, and gently wipe it over the surface so that the metal is continually exposed to fresh etchant. This method is faster than simple immersion. I etched for 10 minutes. When the desired degree of etching is achieved, rinse the piece in water to stop the reaction. Finally, clean off the resist with acetone.I must have got a bit lucky when I did the test piece, because my first go on the thick brass was not so good (top of 3rd picture). Top right was from a transparency print, which didn't transfer enough toner to the brass so the etch isn't very clearly defined. Top left was from glossy inkjet paper, and it's almost good except one little area where the etchant got under the toner. The second piece was much more successful - I rubbed it down harder after ironing, and took more time over soaking the paper off.



-
Excellent work. I have about zero carpentry skills, so this kind of craftsmanship always amazes me.
Sent from 9 miles from the face of the sun
-
Finished shaping the escutcheon for the keyhole. I made 2 in case I messed it up at any point. I will probably paint one of them and decide which to use when I've got the finish on the case.
It will be fixed with brass pins, which have to be short so as not to hit the lock body on the inside of the door. I didn't have any suitable so I cut down some longer ones. They actually turned out to be brass-plated steel, too tough for SAK pliers to cope with, but a Vic Spirit and a SOG PPP cut through them with ease.

-
@shibafu said:
Finished shaping the escutcheon for the keyhole. I made 2 in case I messed it up at any point. I will probably paint one of them and decide which to use when I've got the finish on the case.It will be fixed with brass pins, which have to be short so as not to hit the lock body on the inside of the door. I didn't have any suitable so I cut down some longer ones. They actually turned out to be brass-plated steel, too tough for SAK pliers to cope with, but a Vic Spirit and a SOG PPP cut through them with ease.
Wowzeer.. those look great

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
