firearms
-
@shark_za said:
I have been shooting revolvers for over 20 years and love them but the reality where I live is multiple armed attackers so capacity and reloads are very important.Not counting on a reload in a shootout is very short sighted; in sport shooting I have had a case slip back and fall under the ejector star, more than once, this is not easy to fix.
Unfired powder and grime also gets under the star making the revolver impossible to close.
Once a bullet pulled itself loose on recoil and bound up the cylinder. Not a tap rack fix.When a revolver goes wrong you need another gun. An auto can get back to shooting quite quickly.
Obviously in your scenario with multiple attackers a auto is a much better option no one is saying it isn't. What I am saying is for 99% of concealed carriers in the USA a single magazine or cylinder will almost always be enough. I agree you should ALWAYS anticipate a reload and have a speed clip or extra magazine or two at the ready, but for the 99% of people that carry everyday and never use their gun the reliability of a revolver outweighs the potential problems with a semi. Obviously you are bias towards semi's since multiple attackers is a possibility and reloads are almost guaranteed if the situation arouse. Most people do not have the same needs as you. Not to say one should not be prepared for such a situation, but its not a priority for the average guy carrying a gun.
Just to address one thing you mentioned about getting a auto back into action quickly. Yes sometimes a auto can be brought back with the standard tap and rack drill, but I have had a auto slip the barrel during recoil and jam the slide in the open position. The gun had to be taken to a gunsmith just to get the slide and barrel free. So not all autos can magically be fixed with a tap and rack. Also what happens if there is a cracked case and the case expands during ignition trapping itself in the barrel? This has happened to me as well. No amount of taping and racking will solve this. If this happened in a revolver just pull the trigger again and your good. What about a ejector failure. Not a ejection failure, but what if your ejector breaks? The gun is useless. There is arguments for both sides.
I am in no way saying you are wrong. If I was you I would carry a semi with two extra mags and a backup gun on top of that. Its all about specific needs and wants in a carry gun. Just my opinion.
-
Dan if you ever get a chance to fire a .500 Linebaugh with full house loads please do so. It a real exciting experience you wont soon forget. I think you may have found a handgun and round with enough recoil.
It is funny you should say that. I am now being gently prodded by a recoil fanatic fan of mine to buy a S&W500. The revolver is around 1200 dollars. I was thinking a little here and there on layaway and it should be mine in a few months. However, when I asked how much a box of 500 S&W magnums were, I was told 80 bucks for 20. That comes out to 4 dollars a round! Yeah, I left the gun exactly where it laid in the display case. Yikes!
As for me, I like both revolvers and semi-automatics.
-
Four dollars a round!
I could not afford to have guns as a hobby in Canada.
-
@HarleyXJGuy said:
Four dollars a round!I could not afford to have guns as a hobby in Canada.
I'm bet the ammo for the S&W 500 is about the same price here.

-
Any one in here carry a hand gun in a shoulder holster (under arm). I want to try this carry, but do not want to invest a lot of money until I see if it will work for me. I now carry on my belt (cons) but cannot get in my pocket, and hard to fasten seat belts (pros) I already have a belt holster. I am looking at some inexpensive shoulders holster with horizontal draw. The gun I will be carrying is a Ruger SP101 in 357 Magnum. So is it worth it to invest in a low quality holster or go all out and get a good one to start. Your opinions welcome. This is the gun I will carry as I own it and it is small enough to carry concealed, and yes I have permit to CC. ???
-
Here is one of my guns, in facts its probably my main carry gun at this point; I traded it off to a mate (for some Spydercos!) who then sold it back to me a few months later.
While he had it he took these photo ;o)
He is a custom maker and runs the local family gun shop and range, his most popular knife is called the "Ranger" shown next to a Wilson Starbenza. He is left handed like me and I think this is his personal ranger. I never use my knives in the left hand; he does. Ranger is M390 steel in Ti frame-lock.
What is interesting about the little Glock is it uses a Gen 2.5 frame; finger grooves but they are smooth.<a href="http://s1299.photobucket.com/user/Jason1587/media/Mobile Uploads/IMG_20150119_063503_zps1478b7b2.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1299.photobucket.com/albums/ag66/Jason1587/Mobile Uploads/IMG_20150119_063503_zps1478b7b2.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1299.photobucket.com/user/Jason1587/media/Mobile Uploads/IMG_20150119_063532_zpsf5953cc3.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1299.photobucket.com/albums/ag66/Jason1587/Mobile Uploads/IMG_20150119_063532_zpsf5953cc3.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Awesome blades and a sweet G27!
How do you like the dogtag?
-
Oh wait those knives aren't your right?

-
Knives are Jason's. I have had a dog tag but don't think it's practical. He small cutting edge can be had elsewhere. I'd even take a Roadie over a dogtag.
Sent from my iPhone using Tapatalk
-
@shark_za said:
Knives are Jason's. I have had a dog tag but don't think it's practical. He small cutting edge can be had elsewhere. I'd even take a Roadie over a dogtag.Sent from my iPhone using Tapatalk
Have you handled a roadie? If so how small is it. It looks larger in pictures than I think it really is.
-
Its very small.
I throw it in my top pocket on occasion as a sheeple friendly biltong knife.Compared to a 58mm SAK.
<a href="http://s11.photobucket.com/user/shark_za/media/Knives/DE823210-BAF3-4BB7-9AA1-DD44396D0899_zpsw7hbtoii.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i11.photobucket.com/albums/a200/shark_za/Knives/DE823210-BAF3-4BB7-9AA1-DD44396D0899_zpsw7hbtoii.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Roadie vs an 84mm SAK I had on my desk.
<a href="http://s11.photobucket.com/user/shark_za/media/Knives/1B0ECEF4-499B-4634-AE3A-8BCAACAB3FB7_zpsckanvg4g.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i11.photobucket.com/albums/a200/shark_za/Knives/1B0ECEF4-499B-4634-AE3A-8BCAACAB3FB7_zpsckanvg4g.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Thanks for the great comparison shots.

I wanted one since before they were released and still do. I just wish the price was slightly better. Even more so now that MAP pricing is in effect.
I may still get one eventually.
-
Mix of air and powder pistols.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo003/IMG_0341small_zpsvhqkeh6y.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo003/IMG_0341small_zpsvhqkeh6y.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo003/IMG_0342smmall_zps7qresqks.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo003/IMG_0342smmall_zps7qresqks.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Browsing some random links on youtube I came across a round I'd never heard of before; the .327 Federal Magnum. Anyone have any experience with this one?
-
Gonna go to the range tomorrow! :)
I will shoot a great gun, it´s not mine, but my shooting club owns several of these. It is an Anschütz Modell 54 in .22lr. A single shot rifle.
One of the most precise systems I´ve ever shot.
-
I might be going to the range tomorrow as well. There will be a fun pistol shoot requiring around 70 rounds.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login