firearms
-
Any one in here carry a hand gun in a shoulder holster (under arm). I want to try this carry, but do not want to invest a lot of money until I see if it will work for me. I now carry on my belt (cons) but cannot get in my pocket, and hard to fasten seat belts (pros) I already have a belt holster. I am looking at some inexpensive shoulders holster with horizontal draw. The gun I will be carrying is a Ruger SP101 in 357 Magnum. So is it worth it to invest in a low quality holster or go all out and get a good one to start. Your opinions welcome. This is the gun I will carry as I own it and it is small enough to carry concealed, and yes I have permit to CC. ???
-
Here is one of my guns, in facts its probably my main carry gun at this point; I traded it off to a mate (for some Spydercos!) who then sold it back to me a few months later.
While he had it he took these photo ;o)
He is a custom maker and runs the local family gun shop and range, his most popular knife is called the "Ranger" shown next to a Wilson Starbenza. He is left handed like me and I think this is his personal ranger. I never use my knives in the left hand; he does. Ranger is M390 steel in Ti frame-lock.
What is interesting about the little Glock is it uses a Gen 2.5 frame; finger grooves but they are smooth.<a href="http://s1299.photobucket.com/user/Jason1587/media/Mobile Uploads/IMG_20150119_063503_zps1478b7b2.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1299.photobucket.com/albums/ag66/Jason1587/Mobile Uploads/IMG_20150119_063503_zps1478b7b2.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1299.photobucket.com/user/Jason1587/media/Mobile Uploads/IMG_20150119_063532_zpsf5953cc3.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1299.photobucket.com/albums/ag66/Jason1587/Mobile Uploads/IMG_20150119_063532_zpsf5953cc3.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Awesome blades and a sweet G27!
How do you like the dogtag?
-
Oh wait those knives aren't your right?

-
Knives are Jason's. I have had a dog tag but don't think it's practical. He small cutting edge can be had elsewhere. I'd even take a Roadie over a dogtag.
Sent from my iPhone using Tapatalk
-
@shark_za said:
Knives are Jason's. I have had a dog tag but don't think it's practical. He small cutting edge can be had elsewhere. I'd even take a Roadie over a dogtag.Sent from my iPhone using Tapatalk
Have you handled a roadie? If so how small is it. It looks larger in pictures than I think it really is.
-
Its very small.
I throw it in my top pocket on occasion as a sheeple friendly biltong knife.Compared to a 58mm SAK.
<a href="http://s11.photobucket.com/user/shark_za/media/Knives/DE823210-BAF3-4BB7-9AA1-DD44396D0899_zpsw7hbtoii.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i11.photobucket.com/albums/a200/shark_za/Knives/DE823210-BAF3-4BB7-9AA1-DD44396D0899_zpsw7hbtoii.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Roadie vs an 84mm SAK I had on my desk.
<a href="http://s11.photobucket.com/user/shark_za/media/Knives/1B0ECEF4-499B-4634-AE3A-8BCAACAB3FB7_zpsckanvg4g.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i11.photobucket.com/albums/a200/shark_za/Knives/1B0ECEF4-499B-4634-AE3A-8BCAACAB3FB7_zpsckanvg4g.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Thanks for the great comparison shots.

I wanted one since before they were released and still do. I just wish the price was slightly better. Even more so now that MAP pricing is in effect.
I may still get one eventually.
-
Mix of air and powder pistols.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo003/IMG_0341small_zpsvhqkeh6y.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo003/IMG_0341small_zpsvhqkeh6y.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo003/IMG_0342smmall_zps7qresqks.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo003/IMG_0342smmall_zps7qresqks.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Browsing some random links on youtube I came across a round I'd never heard of before; the .327 Federal Magnum. Anyone have any experience with this one?
-
Gonna go to the range tomorrow! :)
I will shoot a great gun, it´s not mine, but my shooting club owns several of these. It is an Anschütz Modell 54 in .22lr. A single shot rifle.
One of the most precise systems I´ve ever shot.
-
I might be going to the range tomorrow as well. There will be a fun pistol shoot requiring around 70 rounds.

-
@Gareth said:
Browsing some random links on youtube I came across a round I'd never heard of before; the .327 Federal Magnum. Anyone have any experience with this one?No personal experience, but the round has been around for years. Around 5 or so if I remember correctly.

It is "thinner" than a .357 mag, but is supposed to create the same amount of energy while allowing a revolver cylinder to hold 6 shots instead of 5 shots of .357 mag.
Should be a great round. I personally like to stick with common rounds as ammo is already expensive as it is and specialty rounds are normally more expensive and harder to find.
-
I have a copy of "Cartridges of the World" on my Ipad.
This is what it says about the .327 Federal Magnum.
Introduced in 2008, the .327 Federal Magnum is an attempt to improve the performance of the .32H&R Magnum. .32H&R factory ammunition, as per SAAMI specs, is not loaded to the cartridge's full potential. This is due to the weaker H&R revolvers chambered for this cartridge. Cartridge performance for the .32 H&R Magnum can be subsequently improved with hand-loads, when fired in Ruger or S&W revolvers. The .327 Federal Magnum takes this performance to a new level. This was accomplished by increasing the case capacity and loading the cartridge to a substantially higher pressure (45 000 psi) than the .32 H&R Magnum which is 21 000 psi. In fact, the .327 Federal Magnum is loaded to a higher pressure than any other commercially loaded defensive handgun cartridge. Since .327 Federal Magnums cannot be chambered in any other .32 caliber revolver, there is no concern of over-pressure issues. Ruger worked with Federal during the development of this cartridge and initially offered a three inch version of its SP 101 six shot revolver in this chambering. With factory load, a 100-grain bullet will leave the barrel of the SP 101 at about 1400 fps.
The .327 Federal Magnum is a handful in a 28 ounce SP 101 with full power loads. Federal does offer an 85 grain, low recoil load that is much more controllable, but it is still markedly more powerful than any factory .32 H&R Magnum loads. The terminal performance of this cartridge with both the 100 and 115 grain Speer Gold Dot loads approaches that of the .357 Magnum with similar bullets. Penetration in 10% gelatin is in excess of 14 inches, and bullets exhibit wide expansion. The design of these two Gold Dot bullets is very important to this cartridge, because prior to them, there were no .312 diameter bullets that could withstand the velocity this cartridge is capable of producing.
If you can manage the recoil from a handgun, it is a viable self defense option, and from a rifle, it is capable of taking deer sized game out to 100 yards. From the 16 inch barreled Marlin, the 110 grain bullet speeds along at over 2000 fps. One thing that sets the .327 Federal Magnum apart from all other revolver cartridges is the fact that any revolver so chambered will also fire .32 Short, .32 Long, and .32 H&R Magnum ammunition. This cartridge's versatility is unmatched.
-
@Humppa said:
Gonna go to the range tomorrow! :)I will shoot a great gun, it´s not mine, but my shooting club owns several of these. It is an Anschütz Modell 54 in .22lr. A single shot rifle.
One of the most precise systems I´ve ever shot.
I'm the fortunate owner of five Anschutz rifles.I posted a pic of one my sporters in a thread titled ".22 rifles" last year.
All of the Anschutz rifle are shipped with a target which is shot at the factory.This rifle had a target that consisted of 10 rounds fired at 50 meters and all shots were touching and also fit inside of the head of the figure on a dime.
Here is my Anschutz 54.18 Silhouette rifle.

-
Here is a pic of the Anschutz 54 Sporter.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login