The multitool of the automotive world!
-
Unfortunately the yellow paint didn't last too well. Countless stone chips are starting to cause rust to set in and I figured I'd better do something about it before it's too late.
As you can see, it is quite a mess, so out came the angle grinder and wire wheel again and I took it down to bare metal again.
I only wish I had the time right now to do the whole body of the trailer and not just the fenders, but I only have so much time before I move and this was the biggest priority. I picked up some spray in bedliner for pickup trucks and I figure that should stand up to more punishment than the basic Tremclad did. Unfortunately all that was available was black bedliner.
So now my trailer isn't quite as distinctive looking as it was, but at least the metal should be somewhat safer from rust now.
My marker lights haven't fared much better than the yellow paint, so I purchased new LED lights on eBay- I got ten for less than I could get one for locally, so I'll probably wire those in today.
As I said, I'd really hoped to be able to strip the whole thing, paint all the metal with bedliner, replace the deck etc this year, but I don't see any of that happening as I have no place to work on it when I get to Ottawa, so I'm limited to whatever I can do here and now.
Def
-
Oops, forgot the final product, at least for now.
I plan to somehow fabricate a mount for the spare tire on the outside of the bed so I can reclaim the space it takes up on the inside.

I'm also thinking that a tool box may find it's way onto the trailer too if I can find one for a reasonable enough price.
Def
-
Princess Auto sells a tire mount that should do what you need.
-
@derekmac said:
Princess Auto sells a tire mount that should do what you need.Thanks, I think that one mounts on the tongue though and I'm not sure I can do that. With the folding jack stand and the giant spare tire on the back of the Jeep there's not really a lot of space to mount things on the tongue any more.
Def
-
Weld a bolt on top of one of the sides. In front or back of the wheel well. Then stick the tire on and tighten the nut. Tire will be on the outside and it will cost you all most nothing.
That's us mobile
-
That's pretty much what I'd planned. I thought about making an A frame that would attach inside the bed and hold the bolts whole they poke through the grate, and I could attach the wheel to that.
Def
-
That would work nicely too.
That's us mobile
-
Another project for another time...... I am going to miss my power tools when I move! :P
Def
-
Didn't you take them with you?
That's us mobile
-
I'll be taking a drill and my hand tools. I don't have a garage or any place to put my various saws, grinders, sanders etc so they will have to stay here for now.
Our place in Ottawa is small and there's barely enough outdoors space for my Jeep. No garage, no basement space etc.
Def
-
Bummer. Hopefully you two can find a bigger place later.
That's us mobile
-
...so they can become more >:D >:D >:D >:D
-
We are looking at cottages.
But I should probably get a job at some point.
Def
-
since it's black now maybe I need to do a batch of white Lamontagne logos... or a stencil so you can spray it whatever colour you want?
-
Silly wiring question....
The incandescent lights I am taking off were wired up with only one wire. There was a white wire connected to the light, and a black wire that was cut off pretty far back on one side of the trailer, and no black wire (seemingly) on the other side of the trailer.
I'm not very good when it comes to electricity, but don't you need two wires to create a circuit to make things light up?
Any help on sorting this would be appreciated...
Def
-
grounded to the frame?
-
Maybe- don't I need a positive and negative to make a circuit?
Def
-
You do, but if it's grounded to the frame either via a mounting screw, or wire, that will make the circuit.
-
-
I figured that..... but I assume the yellow wire from the light connects to the existing wire and the black just grounds out to the frame?
That doesn't sound right?
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






