Show off your Sak mod's!
-
@hiraethus said:
Here's one I made a while back which is close to what you're aiming for:

Deluxe Modeler, or Swisschamp with the saw and scaler removed. You should be able to re-use the pins as long as you're careful drilling the heads off. It might be possible to put the metal saw/file opposite the small blade - something I've been meanign to try for a while, but not got round to. I don't think the Compact hook/nail file will work at all on the front side of the knife, but the Cadet/Sportsman file should fit in place of the small blade.That would be a model I'd want to collect for sure...black scales feel right for that one too, I always feel like the SAK is wearing a little tux with those black scales.
MS opposite small blade...hmmm...using spacers on both tools on a layer that's wider than either of them? Like putting the MS in the large blade slot?
I have another question about MS, WS, and scaler...on my Champs I see the fish scaler and wood saw sharing a layer, and the scaler has no back tool. They each have a spring, so the springs are against each other, and the side of the back tool is resting against the spring of the scaler.
If I was going to have WS and MS (no scaler) right next to each other, would I need anything between them?...not sure how they do it on knives that only have those 2 of the 3. It would mean the back tools - chisel and fine flathead - would also be rubbing against each other and "torqueing"/twisting in the case of the screwdriver. Also I see the thickest plate on the Champs is between MS and WS, and it has no cutout at all, as if to say the WS and MS must not ever touch...
@hiraethus said:
This is an existing model: the Rucksack, though you'll need to add your own serrations.Ah...I will definitely mention that in the upcoming teardown/build (aka "bloopers reel") video. I'm still pretty lost on the 110 and 58 model names...I was considering the Hercules for a while, then S557 (pre and post Vic versions), but I feel like I prefer my "toolsy" SAKs at 91mm, then just blades at 110mm. Seems a little silly to have that ergonomic handle and then a 20 layer knife...which of course now I want to see and buy. That WorkchampXL is pretty crazy but seemed like mostly just funny shaped blades were added.
-
Here's one I made a while back which is close to what you're aiming for:

Deluxe Modeler, or Swisschamp with the saw and scaler removed. You should be able to re-use the pins as long as you're careful drilling the heads off. It might be possible to put the metal saw/file opposite the small blade - something I've been meanign to try for a while, but not got round to. I don't think the Compact hook/nail file will work at all on the front side of the knife, but the Cadet/Sportsman file should fit in place of the small blade.That would be a model I'd want to collect for sure...black scales feel right for that one too, I always feel like the SAK is wearing a little tux with those black scales.
MS opposite small blade...hmmm...using spacers on both tools on a layer that's wider than either of them? Like putting the MS in the large blade slot?
I have another question about MS, WS, and scaler...on my Champs I see the fish scaler and wood saw sharing a layer, and the scaler has no back tool. They each have a spring, so the springs are against each other, and the side of the back tool is resting against the spring of the scaler.
If I was going to have WS and MS (no scaler) right next to each other, would I need anything between them?...not sure how they do it on knives that only have those 2 of the 3. It would mean the back tools - chisel and fine flathead - would also be rubbing against each other and "torqueing"/twisting in the case of the screwdriver. Also I see the thickest plate on the Champs is between MS and WS, and it has no cutout at all, as if to say the WS and MS must not ever touch...
@hiraethus said:
This is an existing model: the Rucksack, though you'll need to add your own serrations.Ah...I will definitely mention that in the upcoming teardown/build (aka "bloopers reel") video. I'm still pretty lost on the 110 and 58 model names...I was considering the Hercules for a while, then S557 (pre and post Vic versions), but I feel like I prefer my "toolsy" SAKs at 91mm, then just blades at 110mm. Seems a little silly to have that ergonomic handle and then a 20 layer knife...which of course now I want to see and buy. That WorkchampXL is pretty crazy but seemed like mostly just funny shaped blades were added.
Based on experience, a liner is required between the MS and WS... And a specific liner is required for the WS... Otherwise proper closing of WS would not be achieved...
Sent from my iPhone using Tapatalk
-

A liner similar to the one in this pic (minus the area marked with a sharpee) or the full liner similar to WS layer pic I shared earlier will be fine.
Sent from my iPhone using Tapatalk
-

A sneak peak of my on-going project... Just waiting on a donor sak to arrive to complete my build... [emoji8][emoji8][emoji8]

Sent from my iPhone using Tapatalk
-
-
It's just the normal spring... Looks black due to both camera angle and lighting... [emoji23]
Sent from my iPhone using Tapatalk
-
Another sneak peak... Only about 90% complete... Still needs some finishing... [emoji16]

Sent from my iPhone using Tapatalk
-
Lookin great!

-
Can't wait to see the 100%

-
Yes, work faster jaya_man! We need to know.

-
A liner similar to the one in this pic (minus the area marked with a sharpee) or the full liner similar to WS layer pic I shared earlier will be fine.
Ah yes I see now...a variation in the liners......red Champ (2007 on the package, has gray magnifier), you can see it has a solid, thick plate between MS and WS, USA flag Champ has the newer file and liner like your photo.
2 of my 3 donor knives showed up today, still waiting on the 110mm
Seeing your wood scales in progress has me considering making some purpleheart scales...but I don't wanna give up tweezers...

-

A liner similar to the one in this pic (minus the area marked with a sharpee) or the full liner similar to WS layer pic I shared earlier will be fine.
Ah yes I see now...a variation in the liners......red Champ (2007 on the package, has gray magnifier), you can see it has a solid, thick plate between MS and WS, USA flag Champ has the newer file and liner like your photo.
2 of my 3 donor knives showed up today, still waiting on the 110mm
Seeing your wood scales in progress has me considering making some purpleheart scales...but I don't wanna give up tweezers...
Cant wait to finish my project... Cant wait to see yours completed... ☕️
Sent from my iPhone using Tapatalk
-
Damascus Electrician X
I have just seen this and all I can say is :ahhh :ahhh :ahhh :ahhh !
It is gonna be an understatement if I say I fell in love with this!

-

A sneak peak of my on-going project... Just waiting on a donor sak to arrive to complete my build... [emoji8][emoji8][emoji8]

Sent from my iPhone using Tapatalk
LOVELY scales! Where do you get those pins, if I may ask?
Sourced from a friend... Unfortunately, 2.2mm sized pins are unavailable in this part of the world... Had to stick it in the rotary tool and sandwhich it between sandpapers... [emoji16][emoji16][emoji16]
Sent from my iPhone using Tapatalk
-
I received the 111m knife today (I've been calling it a 110mm knife, NOOB). Got 2 of the donors taken apart, the Champ and the Outrider.
I liked that little nylon scales Sportsman so much I didn't have the heart to take it apart...and now I wish it had scissors (tried to see if I could find any of the older 84mm knives that still had scissors...search continues.)
If I want a nail file instead of the small blade, going into a 91mm knife...which knives should I be looking at to get that implement?
Seems like the Sportsman is one of the only ones. I'm guessing whenever I see a nail file instead of small blade in a 91mm custom build, it was taken from the 84mm Sportsman?I did a quick test fit of the fine phillips from underneath the scissors on the Outrider as a replacement for the magnifying glass across from the larger size phillips in a 91mm chassis.
There's plenty of room for it. But there are 3 issues:
-It's pretty loose when closed...I know it's supposed to be a little bit loose since it's deployed with that goofy hook. The standard phillips will keep the fine phillips from swinging out on its own, but it would be nice if it was a little tighter when closed. Granted...when I get it all sandwiched together and pinned up, the friction of the liners pressing on the sides of it may keep it from flapping around.
-The fine phillips is thinner than the standard phillips/mag glass/LED layer...I expected this and just need to put a spacer in there...but the difference is minor...the fine phillips is the thickness of scissors...going to need very thin stock to cut a spacer from...or should I just use a very thin washer?
-The little hook that's there to help you deploy the screwdriver would interfere with a keyring...but I'm thinking I just need to keep the screwdrivers layer away from the can/bottle layer...screwdrivers in the middle layer would be ace. I tried swapping the positions of the regular and fine phillips on the spring but then the regular phillips doesn't snap nice into the 90 degree position.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
