Show off your Sak mod's!
-

A sneak peak of my on-going project... Just waiting on a donor sak to arrive to complete my build... [emoji8][emoji8][emoji8]

Sent from my iPhone using Tapatalk
-
-
It's just the normal spring... Looks black due to both camera angle and lighting... [emoji23]
Sent from my iPhone using Tapatalk
-
Another sneak peak... Only about 90% complete... Still needs some finishing... [emoji16]

Sent from my iPhone using Tapatalk
-
Lookin great!

-
Can't wait to see the 100%

-
Yes, work faster jaya_man! We need to know.

-
A liner similar to the one in this pic (minus the area marked with a sharpee) or the full liner similar to WS layer pic I shared earlier will be fine.
Ah yes I see now...a variation in the liners......red Champ (2007 on the package, has gray magnifier), you can see it has a solid, thick plate between MS and WS, USA flag Champ has the newer file and liner like your photo.
2 of my 3 donor knives showed up today, still waiting on the 110mm
Seeing your wood scales in progress has me considering making some purpleheart scales...but I don't wanna give up tweezers...

-

A liner similar to the one in this pic (minus the area marked with a sharpee) or the full liner similar to WS layer pic I shared earlier will be fine.
Ah yes I see now...a variation in the liners......red Champ (2007 on the package, has gray magnifier), you can see it has a solid, thick plate between MS and WS, USA flag Champ has the newer file and liner like your photo.
2 of my 3 donor knives showed up today, still waiting on the 110mm
Seeing your wood scales in progress has me considering making some purpleheart scales...but I don't wanna give up tweezers...
Cant wait to finish my project... Cant wait to see yours completed... ☕️
Sent from my iPhone using Tapatalk
-
Damascus Electrician X
I have just seen this and all I can say is :ahhh :ahhh :ahhh :ahhh !
It is gonna be an understatement if I say I fell in love with this!

-

A sneak peak of my on-going project... Just waiting on a donor sak to arrive to complete my build... [emoji8][emoji8][emoji8]

Sent from my iPhone using Tapatalk
LOVELY scales! Where do you get those pins, if I may ask?
Sourced from a friend... Unfortunately, 2.2mm sized pins are unavailable in this part of the world... Had to stick it in the rotary tool and sandwhich it between sandpapers... [emoji16][emoji16][emoji16]
Sent from my iPhone using Tapatalk
-
I received the 111m knife today (I've been calling it a 110mm knife, NOOB). Got 2 of the donors taken apart, the Champ and the Outrider.
I liked that little nylon scales Sportsman so much I didn't have the heart to take it apart...and now I wish it had scissors (tried to see if I could find any of the older 84mm knives that still had scissors...search continues.)
If I want a nail file instead of the small blade, going into a 91mm knife...which knives should I be looking at to get that implement?
Seems like the Sportsman is one of the only ones. I'm guessing whenever I see a nail file instead of small blade in a 91mm custom build, it was taken from the 84mm Sportsman?I did a quick test fit of the fine phillips from underneath the scissors on the Outrider as a replacement for the magnifying glass across from the larger size phillips in a 91mm chassis.
There's plenty of room for it. But there are 3 issues:
-It's pretty loose when closed...I know it's supposed to be a little bit loose since it's deployed with that goofy hook. The standard phillips will keep the fine phillips from swinging out on its own, but it would be nice if it was a little tighter when closed. Granted...when I get it all sandwiched together and pinned up, the friction of the liners pressing on the sides of it may keep it from flapping around.
-The fine phillips is thinner than the standard phillips/mag glass/LED layer...I expected this and just need to put a spacer in there...but the difference is minor...the fine phillips is the thickness of scissors...going to need very thin stock to cut a spacer from...or should I just use a very thin washer?
-The little hook that's there to help you deploy the screwdriver would interfere with a keyring...but I'm thinking I just need to keep the screwdrivers layer away from the can/bottle layer...screwdrivers in the middle layer would be ace. I tried swapping the positions of the regular and fine phillips on the spring but then the regular phillips doesn't snap nice into the 90 degree position.


-
Serrations went Ok I guess...there is still a "blob" of metal on the surface of the blade, at the edge of where the little bit was missing...either the damage to the blade somehow melted a bit of the metal back onto the blade...OR...some clever guy was trying to fill the chip with rod, or it randomly fell onto a torch...most likely it was aliens. These could be pretty and more even...thinking of going in with a tiny round file to clean them up a bit...but already they cut well.
The size and shape was just a result of the notch that was already there. I guess I could have went bigger.




-
@JamesJ said:
I received the 111m knife today (I've been calling it a 110mm knife, NOOB). Got 2 of the donors taken apart, the Champ and the Outrider.I liked that little nylon scales Sportsman so much I didn't have the heart to take it apart...and now I wish it had scissors (tried to see if I could find any of the older 84mm knives that still had scissors...search continues.)
If I want a nail file instead of the small blade, going into a 91mm knife...which knives should I be looking at to get that implement?
Seems like the Sportsman is one of the only ones. I'm guessing whenever I see a nail file instead of small blade in a 91mm custom build, it was taken from the 84mm Sportsman?I did a quick test fit of the fine phillips from underneath the scissors on the Outrider as a replacement for the magnifying glass across from the larger size phillips in a 91mm chassis.
There's plenty of room for it. But there are 3 issues:
-It's pretty loose when closed...I know it's supposed to be a little bit loose since it's deployed with that goofy hook. The standard phillips will keep the fine phillips from swinging out on its own, but it would be nice if it was a little tighter when closed. Granted...when I get it all sandwiched together and pinned up, the friction of the liners pressing on the sides of it may keep it from flapping around.
-The fine phillips is thinner than the standard phillips/mag glass/LED layer...I expected this and just need to put a spacer in there...but the difference is minor...the fine phillips is the thickness of scissors...going to need very thin stock to cut a spacer from...or should I just use a very thin washer?
-The little hook that's there to help you deploy the screwdriver would interfere with a keyring...but I'm thinking I just need to keep the screwdrivers layer away from the can/bottle layer...screwdrivers in the middle layer would be ace. I tried swapping the positions of the regular and fine phillips on the spring but then the regular phillips doesn't snap nice into the 90 degree position.Hi James,
The fine phillips from the outrider is probably loose and moves freely because there isn't enough tension on the backspring. If you notice the end part where the phillips sit on the outrider is a bit higher compared to the backspring part where the magnifying glass sits...
Putting washers to compensate for tool width is to prevent side to side play...
:Cheers:
Sent from my iPhone using Tapatalk
-
@JamesJ said:
Serrations went Ok I guess...there is still a "blob" of metal on the surface of the blade, at the edge of where the little bit was missing...either the damage to the blade somehow melted a bit of the metal back onto the blade...OR...some clever guy was trying to fill the chip with rod, or it randomly fell onto a torch...most likely it was aliens. These could be pretty and more even...thinking of going in with a tiny round file to clean them up a bit...but already they cut well.The size and shape was just a result of the notch that was already there. I guess I could have went bigger.
Awesome work there James [emoji1303]
Sent from my iPhone using Tapatalk
-
@JamesJ said:
I received the 111m knife today (I've been calling it a 110mm knife, NOOB). Got 2 of the donors taken apart, the Champ and the Outrider.I liked that little nylon scales Sportsman so much I didn't have the heart to take it apart...and now I wish it had scissors (tried to see if I could find any of the older 84mm knives that still had scissors...search continues.)
If I want a nail file instead of the small blade, going into a 91mm knife...which knives should I be looking at to get that implement?
Seems like the Sportsman is one of the only ones. I'm guessing whenever I see a nail file instead of small blade in a 91mm custom build, it was taken from the 84mm Sportsman?I did a quick test fit of the fine phillips from underneath the scissors on the Outrider as a replacement for the magnifying glass across from the larger size phillips in a 91mm chassis.
There's plenty of room for it. But there are 3 issues:
-It's pretty loose when closed...I know it's supposed to be a little bit loose since it's deployed with that goofy hook. The standard phillips will keep the fine phillips from swinging out on its own, but it would be nice if it was a little tighter when closed. Granted...when I get it all sandwiched together and pinned up, the friction of the liners pressing on the sides of it may keep it from flapping around.
-The fine phillips is thinner than the standard phillips/mag glass/LED layer...I expected this and just need to put a spacer in there...but the difference is minor...the fine phillips is the thickness of scissors...going to need very thin stock to cut a spacer from...or should I just use a very thin washer?
-The little hook that's there to help you deploy the screwdriver would interfere with a keyring...but I'm thinking I just need to keep the screwdrivers layer away from the can/bottle layer...screwdrivers in the middle layer would be ace. I tried swapping the positions of the regular and fine phillips on the spring but then the regular phillips doesn't snap nice into the 90 degree position.Wow the in-line phillips and backspring shape has evolved again... New info for me...
Here's a comparison pic of the same in-line phillips layer I dissambled in the past..

Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
