The Dremel (or clone ) Owners Club
-
@Sparky415 said:
Great score Eldorf
I am happy with it, though truthfully it probably wont get much use as I have my Chicago Electric from Harbor Freight and my Dremel 3000 that I just bought a month or so ago (which I still have yet to use, other then plugging it in to insure it runs) that I will be using more. I think I bought it more for the nostalgia as my very first Rotary Tool was a B&D Wizard just like it. Plus compared to the Chicago Electric and the Dremel its a bit under powered, they are corded and this one uses 3.6v VersaPak batteries. I have been looking at a Cordless 9v Chicago Electric Rotary Tool from Harbor Freight for a possible "portable" Rotary Tool for use when I am not near a power outlet or building a "portable power workstation" for the corded Rotary Tools using some 12v SLA batteries and a power inverter similar to one I found over on Instructables.
-
I had a Draper clone for years and hardly used it until I joined this forum (then it died
)
I now have two Dremels that I bought second hand
It’s surprising how much you can do with one with a little patience
-
@Sparky415 said:
It’s surprising how much you can do with one with a little patience
Couldn't agree more. I primarily used my Rotary Tools (the original B&D Wizard and the single speed Harbor Freight one) for working with wargame miniatures that I wanted to do conversions to, until I bought the Chicago Electric Variable Speed Rotary Tool. I am now looking for projects around the house I can use the Rotary Tools for. I did get a bunch of river rocks and engraved a full set of Futhark runes for myself (haven't been "stained" yet as I still have two stones to engrave for the set) a pagan friend of mine who was thinking of trying out rune casting (these stones have even been properly "stained" with the users blood that was mixed in with the red paint used to fill in the engraved rune on each stone by the individual I made the set for). I have also engraved for them a smaller set of Witch/Wicca runes (these symbolize such things as the Moon, Man, Woman, Waves/Water, Harvest/Crops, etc...). For my mom I took a slightly longer stone and engraved the runes from Kili's runestone in the Hobbit that she asked if I could do for her. I am thinking of also engraving a rune stone for my 5 year old nephew, who keeps trying to steal the runestone I made my mom that has his name in the runic equivalent, though I would have to spell it slightly different with the runes then how its spelt as there is no rune that is equivalent to X, will have to use two runes the one for C/K and the one for S.
As for other uses, now that it is getting warmer out will be using my rotary tool (along with the Dremel sharpening attachment) to sharpen my lawn mowers blade along with the blade from a friends mower. I have already used it with one grinding stone to sharpen the blade of a hatchet/hand ax and a machete that I have for camping since I couldn't find my sharpening stone for them, all I could find was the ceramic rod sharpener for my knives.
I am hoping to get some pinewood derby car kits and using the Rotary Tools (along with a coping saw or scroll saw) to help my best friends two boys and my nephew build a car each along designing and building a car for me. I do know that Dremel had partnered with both the Boy Scouts of America (also known as the BSA) and Lowe's to do a Pinewood Derby Workshops (this year they were held on two days, one in Jan and one in Feb), and Dremel has/had a Pinewood Derby builders kit available, it contains one official BSA Pinewood Derby Kit (wood block, axles, and wheels) along with Dremel 18 accessories. If I am correct the kit is Dremel kit#216-02, and retails/retailed for about $18US
-
It’s surprising how much you can do with one with a little patience

these stones have even been properly "stained" with the users blood that was mixed in with the red paint used to fill in the engraved rune on each stone by the individual I made the set for
I was staining micarta with my own blood yesterday :ahhh
-
5 Tools & Countless Options!
2 @ 4200, 1 for home & 1 for work
1 @ Mid 2000's Dremel - in storage right now
1 @ Mid 1990's Dremel - in storage right now too
1 @ 1980 or earlier knock off I think. So worn its very hard to tell LOL!Cases and kits of tool accessories too numerous to list here, but essential.
Newest favorites are the EZ-Locks and Keyless Chuck (sometimes no-tools is nice)!
-
@Gr8ToolFan said:
5 Tools & Countless Options!2 @ 4200, 1 for home & 1 for work
1 @ Mid 2000's Dremel - in storage right now
1 @ Mid 1990's Dremel - in storage right now too
1 @ 1980 or earlier knock off I think. So worn its very hard to tell LOL!Cases and kits of tool accessories too numerous to list here, but essential.
Newest favorites are the EZ-Locks and Keyless Chuck (sometimes no-tools is nice)!
Pics????
I was looking at the 4200 when I bought my Dremel 3000, but went with the 3000 as the collets for it are interchangeable with my Chicago Electric Rotary Tool, where as the 4200 uses a whole new collet system.
Been trying my hand at using my Rotary Tools for some wood carving, mainly taking 1-1/2" or so thick branches and craving faces into the side of them (Forest Spirit Wood Carvings). So far its a learning experience, using a rotary Tool for carving wood is totally different then using a knife or chisels to carve, it is far easier in my opinion to accidentally remove too much material with the Rotary Tool. No pics of the attempts as I am still getting used to/learning to using the Rotary Tool for carving.
-
Oh no, Not another one.
I just added another rotary tool to my collection. This one is another Harbor Freight Chicago Electric Variable Speed Rotary tool, though this one isn't the corded model, it is a 9.6 volt Cordless Variable Speed Rotary Tool (item #69946). It came with a flex shaft (making it a total of 2 that I now have) and an LED Collar light that replaces the collar cap. It also comes with the standard small assortment of bits (some grinding stones, sanding drum w/ sanding bands, disc and screw mandrels with cutoff discs, sanding discs and a couple felt buffing wheels, dressing stone, a couple drill bits, and the collet wrench along with 1 spare collet (not sure of size right now). I also bought the 276pc Rotary Tool Accessory Kit that Harbor Freight carries since one can always use more diamond tipped engraving burrs, mandrels, grinding stones and even the grinding tone wheels that you use the mandrels with.
I am seriously going to have to build that Shop Notes Rotary Tool Cabinet or the Shop Notes Rotary Tool Storage Case as I know have (1) Dremel 3000, (1) Chicago Electric VS rotary tool (Corded), (1) Chicago Electric VS Rotary Tool (Cordless), (1) Black and Decker Wizard rotary Tool (cordless), and (1) Harbor Freight single speed rotary tool along with a ton of accessories and a handful of attachments (ie flex shafts, lawn mower sharpening guide, sanding/grinding guide, etc...) so that i can store everything easier then I am now.
-
@eldorf.dragonsbane said:
Oh no, Not another one.I just added another rotary tool to my collection. This one is another Harbor Freight Chicago Electric Variable Speed Rotary tool, though this one isn't the corded model, it is a 9.6 volt Cordless Variable Speed Rotary Tool (item #69946). It came with a flex shaft (making it a total of 2 that I now have) and an LED Collar light that replaces the collar cap. It also comes with the standard small assortment of bits (some grinding stones, sanding drum w/ sanding bands, disc and screw mandrels with cutoff discs, sanding discs and a couple felt buffing wheels, dressing stone, a couple drill bits, and the collet wrench along with 1 spare collet (not sure of size right now). I also bought the 276pc Rotary Tool Accessory Kit that Harbor Freight carries since one can always use more diamond tipped engraving burrs, mandrels, grinding stones and even the grinding tone wheels that you use the mandrels with.
I am seriously going to have to build that Shop Notes Rotary Tool Cabinet or the Shop Notes Rotary Tool Storage Case as I know have (1) Dremel 3000, (1) Chicago Electric VS rotary tool (Corded), (1) Chicago Electric VS Rotary Tool (Cordless), (1) Black and Decker Wizard rotary Tool (cordless), and (1) Harbor Freight single speed rotary tool along with a ton of accessories and a handful of attachments (ie flex shafts, lawn mower sharpening guide, sanding/grinding guide, etc...) so that i can store everything easier then I am now.
Come on, you can't just tell everyone and not put a pic up! That's like torture!
JR -
Pics were delayed due to me posting that in the 2 minutes between getting home from Harbor Freight and grabbing what i needed to grab for work, then heading out the door to work.
Pic 1- The rotary tool in the case with all the accessories
Pic 2- The Included flex Shaft
Pic 3- the LED collar light
Pic 4- The LED collar light on



-
More Pics
Pic 1- LED Collar on rotary tool
Pic 2- LED collar on rotary tool, light on
Pic 3- Accessories box that came with rotary tool


-
Very nice. :)
JR -
So I said earlier that I would get a Proxxon the day my Dremel 300 broke but I went away and got one anyway. It's a 12V machine and while I haven't used it for anything heavy it seems like a better tool than the Dremel. The provided box is also a much more convenient size than the Dremel one and allows you to remove the insert to use the box for other stuff if you want.

-
Come on guys, it's been since October since anyone posted on here, you can't tell me no ones used theirs since then? So here I'll start it off,,
My first project of the new year, what is it you ask? I had no clue these things even existed until I even saw one on amazon, even after seeing it I had to do research. But I liked it and kinda needed one so I set sail to the hobby desk to fig it out,
Now, if I had a little workshop with a coping saw and a barrel sander or belt sander I would have had this thing done in 5min, but I don't so I ended up using a Dremel for everything except the fine sanding and rubbing leather on the edges. Besides that all it is, is a small piece of plywood I pulled out of the basement by cutting with the sak farmer saw!
So here it is, a thumb book page holder, hey it works, I'm down with it, I'll have to try it out tonight!
JR -
That looks handy. I think a lot of my volunteers (me included) would love that
-
@styx said:
That looks handy. I think a lot of my volunteers (me included) would love thatI was going to use it last night but I dozed off, you can get them online, at least their real wood and not plywood, they also have them in very cheap thin plastic, I wouldn't mind one of those just like I made just as thick in like a funky neon green plastic! That would be cool, or layered black green or black red!
JR -
As soon as I read "you can get them online" my brain screamed expensive. Although they could be an interesting gift for our sponsors as well
-
I got a nice haul of bits for mine at xmas, I haven't used any yet as I got most of them last Saturday when my sister finally made it here for a belated xmas, I'll take a pic tonight to share.
-
As soon as I read "you can get them online" my brain screamed expensive. Although they could be an interesting gift for our sponsors as well
What, the wood or plastic? Yeah the wood ones are like $12-20 US but the plastic ones are like $1-8 depending where you order from.
JRThanks. Still, We'd need about 250 of 'em, with the exchange rate... perhaps better to spend that cash on a few education seminars for new volunteers
-
My rotary tools have been basically been getting used for around the house jobs. I did pick up one of the Milescraft right angle attachments at Menards along with a 4pk of the RotoZip 1'8" shank multi purpose cutting bits (exact same ones as the Dremel multi purpose cutting bits, and I do mean exact same ones as both Dremel and RotoZip are owned by Bosch tools) which are cheaper to get then the individual Dremel Multi Purpose bits (about $3.50 for one vs. about $7.50 for 4). Whats Nice about the Right angle Attachment it came with 2 collet nuts with the square hole, one fits the Dremel 3000 the other fits my Harbor Freight Rotary Tools (the nut is designed to act ans a collet hold the squared end of the flex shafts and the right angle attachment without use of a collet). I will try to get pics but not at home at the moment and wont be home till late tonight.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login