The Dremel (or clone ) Owners Club
-
5 Tools & Countless Options!
2 @ 4200, 1 for home & 1 for work
1 @ Mid 2000's Dremel - in storage right now
1 @ Mid 1990's Dremel - in storage right now too
1 @ 1980 or earlier knock off I think. So worn its very hard to tell LOL!Cases and kits of tool accessories too numerous to list here, but essential.
Newest favorites are the EZ-Locks and Keyless Chuck (sometimes no-tools is nice)!
-
@Gr8ToolFan said:
5 Tools & Countless Options!2 @ 4200, 1 for home & 1 for work
1 @ Mid 2000's Dremel - in storage right now
1 @ Mid 1990's Dremel - in storage right now too
1 @ 1980 or earlier knock off I think. So worn its very hard to tell LOL!Cases and kits of tool accessories too numerous to list here, but essential.
Newest favorites are the EZ-Locks and Keyless Chuck (sometimes no-tools is nice)!
Pics????
I was looking at the 4200 when I bought my Dremel 3000, but went with the 3000 as the collets for it are interchangeable with my Chicago Electric Rotary Tool, where as the 4200 uses a whole new collet system.
Been trying my hand at using my Rotary Tools for some wood carving, mainly taking 1-1/2" or so thick branches and craving faces into the side of them (Forest Spirit Wood Carvings). So far its a learning experience, using a rotary Tool for carving wood is totally different then using a knife or chisels to carve, it is far easier in my opinion to accidentally remove too much material with the Rotary Tool. No pics of the attempts as I am still getting used to/learning to using the Rotary Tool for carving.
-
Oh no, Not another one.
I just added another rotary tool to my collection. This one is another Harbor Freight Chicago Electric Variable Speed Rotary tool, though this one isn't the corded model, it is a 9.6 volt Cordless Variable Speed Rotary Tool (item #69946). It came with a flex shaft (making it a total of 2 that I now have) and an LED Collar light that replaces the collar cap. It also comes with the standard small assortment of bits (some grinding stones, sanding drum w/ sanding bands, disc and screw mandrels with cutoff discs, sanding discs and a couple felt buffing wheels, dressing stone, a couple drill bits, and the collet wrench along with 1 spare collet (not sure of size right now). I also bought the 276pc Rotary Tool Accessory Kit that Harbor Freight carries since one can always use more diamond tipped engraving burrs, mandrels, grinding stones and even the grinding tone wheels that you use the mandrels with.
I am seriously going to have to build that Shop Notes Rotary Tool Cabinet or the Shop Notes Rotary Tool Storage Case as I know have (1) Dremel 3000, (1) Chicago Electric VS rotary tool (Corded), (1) Chicago Electric VS Rotary Tool (Cordless), (1) Black and Decker Wizard rotary Tool (cordless), and (1) Harbor Freight single speed rotary tool along with a ton of accessories and a handful of attachments (ie flex shafts, lawn mower sharpening guide, sanding/grinding guide, etc...) so that i can store everything easier then I am now.
-
@eldorf.dragonsbane said:
Oh no, Not another one.I just added another rotary tool to my collection. This one is another Harbor Freight Chicago Electric Variable Speed Rotary tool, though this one isn't the corded model, it is a 9.6 volt Cordless Variable Speed Rotary Tool (item #69946). It came with a flex shaft (making it a total of 2 that I now have) and an LED Collar light that replaces the collar cap. It also comes with the standard small assortment of bits (some grinding stones, sanding drum w/ sanding bands, disc and screw mandrels with cutoff discs, sanding discs and a couple felt buffing wheels, dressing stone, a couple drill bits, and the collet wrench along with 1 spare collet (not sure of size right now). I also bought the 276pc Rotary Tool Accessory Kit that Harbor Freight carries since one can always use more diamond tipped engraving burrs, mandrels, grinding stones and even the grinding tone wheels that you use the mandrels with.
I am seriously going to have to build that Shop Notes Rotary Tool Cabinet or the Shop Notes Rotary Tool Storage Case as I know have (1) Dremel 3000, (1) Chicago Electric VS rotary tool (Corded), (1) Chicago Electric VS Rotary Tool (Cordless), (1) Black and Decker Wizard rotary Tool (cordless), and (1) Harbor Freight single speed rotary tool along with a ton of accessories and a handful of attachments (ie flex shafts, lawn mower sharpening guide, sanding/grinding guide, etc...) so that i can store everything easier then I am now.
Come on, you can't just tell everyone and not put a pic up! That's like torture!
JR -
Pics were delayed due to me posting that in the 2 minutes between getting home from Harbor Freight and grabbing what i needed to grab for work, then heading out the door to work.
Pic 1- The rotary tool in the case with all the accessories
Pic 2- The Included flex Shaft
Pic 3- the LED collar light
Pic 4- The LED collar light on



-
More Pics
Pic 1- LED Collar on rotary tool
Pic 2- LED collar on rotary tool, light on
Pic 3- Accessories box that came with rotary tool


-
Very nice. :)
JR -
So I said earlier that I would get a Proxxon the day my Dremel 300 broke but I went away and got one anyway. It's a 12V machine and while I haven't used it for anything heavy it seems like a better tool than the Dremel. The provided box is also a much more convenient size than the Dremel one and allows you to remove the insert to use the box for other stuff if you want.

-
Come on guys, it's been since October since anyone posted on here, you can't tell me no ones used theirs since then? So here I'll start it off,,
My first project of the new year, what is it you ask? I had no clue these things even existed until I even saw one on amazon, even after seeing it I had to do research. But I liked it and kinda needed one so I set sail to the hobby desk to fig it out,
Now, if I had a little workshop with a coping saw and a barrel sander or belt sander I would have had this thing done in 5min, but I don't so I ended up using a Dremel for everything except the fine sanding and rubbing leather on the edges. Besides that all it is, is a small piece of plywood I pulled out of the basement by cutting with the sak farmer saw!
So here it is, a thumb book page holder, hey it works, I'm down with it, I'll have to try it out tonight!
JR -
That looks handy. I think a lot of my volunteers (me included) would love that
-
@styx said:
That looks handy. I think a lot of my volunteers (me included) would love thatI was going to use it last night but I dozed off, you can get them online, at least their real wood and not plywood, they also have them in very cheap thin plastic, I wouldn't mind one of those just like I made just as thick in like a funky neon green plastic! That would be cool, or layered black green or black red!
JR -
As soon as I read "you can get them online" my brain screamed expensive. Although they could be an interesting gift for our sponsors as well
-
I got a nice haul of bits for mine at xmas, I haven't used any yet as I got most of them last Saturday when my sister finally made it here for a belated xmas, I'll take a pic tonight to share.
-
As soon as I read "you can get them online" my brain screamed expensive. Although they could be an interesting gift for our sponsors as well
What, the wood or plastic? Yeah the wood ones are like $12-20 US but the plastic ones are like $1-8 depending where you order from.
JRThanks. Still, We'd need about 250 of 'em, with the exchange rate... perhaps better to spend that cash on a few education seminars for new volunteers
-
My rotary tools have been basically been getting used for around the house jobs. I did pick up one of the Milescraft right angle attachments at Menards along with a 4pk of the RotoZip 1'8" shank multi purpose cutting bits (exact same ones as the Dremel multi purpose cutting bits, and I do mean exact same ones as both Dremel and RotoZip are owned by Bosch tools) which are cheaper to get then the individual Dremel Multi Purpose bits (about $3.50 for one vs. about $7.50 for 4). Whats Nice about the Right angle Attachment it came with 2 collet nuts with the square hole, one fits the Dremel 3000 the other fits my Harbor Freight Rotary Tools (the nut is designed to act ans a collet hold the squared end of the flex shafts and the right angle attachment without use of a collet). I will try to get pics but not at home at the moment and wont be home till late tonight.
-
@eldorf.dragonsbane said:
My rotary tools have been basically been getting used for around the house jobs. I did pick up one of the Milescraft right angle attachments at Menards along with a 4pk of the RotoZip 1'8" shank multi purpose cutting bits (exact same ones as the Dremel multi purpose cutting bits, and I do mean exact same ones as both Dremel and RotoZip are owned by Bosch tools) which are cheaper to get then the individual Dremel Multi Purpose bits (about $3.50 for one vs. about $7.50 for 4). Whats Nice about the Right angle Attachment it came with 2 collet nuts with the square hole, one fits the Dremel 3000 the other fits my Harbor Freight Rotary Tools (the nut is designed to act ans a collet hold the squared end of the flex shafts and the right angle attachment without use of a collet). I will try to get pics but not at home at the moment and wont be home till late tonight.Cool, I'll be waiting for a pic..
JR -
anyone know what these blue/turquoise things do?
its called 'Bench Clamp for Rotary Tool' i thought it was a kinda lathe adaptor or something.
-
Just attaching a drill to a bench, so you can use it sturdy like a third hand. Like if you needed a bench grinder or wire wheel and had the attachment for a drill, just put it in the drill and attach it to the bench? That’s the only thing I see..
JR -
wishing I had a workshop...
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login