firearms
-
Good shooting!

That's as good as I'm doing with a 6" bbl target revolver.
Hope you can get your Smith squared away.
-
Sorry hear about your M&P woes mate. :( When it is working well how do you like it? BTW good shooting with the .380

-
@Gareth said:
Sorry hear about your M&P woes mate. :( When it is working well how do you like it? BTW good shooting with the .380
When it is working well the trigger (the main reason i had for going with the pc model) pulls like a dream and it is acceptably accurate. I haven't shot anywhere near as well as i shot that .380 though, although that is probably my fault. I shoot low and to the left a good bit which makes me think I'm anticipating the recoil too much.
Here is 8 shots at 30 feet with the shield(after the sight fell off so i was just looking through a hole). I think this was my best grouping of the day. Both the shield and the bodyguard i shot only standing no rest.

-
My shield has a 3.1 inch barrel. The bodyguard 380 is a 2.5 i believe. Each square on the grid on the target is an inch.
-
@ColoSwiss said:
Good shooting!
That's as good as I'm doing with a 6" bbl target revolver.
Hope you can get your Smith squared away.
+100!!!!!

-
Just an update: yesterday I left the gun with the gun store owner who I bought it from. He is going to shoot it today or tomorrow and let me know what he thinks, and if he can do anything or that we need to send it to s&w.
-
I saw a post on twitter this morning that someone was confused as to the purpose of a four barrel rifle. It reminded me of the work by Johann Fanzoj and his Vierling safari rifle
http://www.fanzoj.com/en/gunroom/custom_built_weapons/other_rifles/vierling.html
-
Update on my Shield situation:
Heard from the gun store owner i bought the gun from who I was having shoot my gun for diagnosis. He shot 200-250 rounds through the gun until, get this....
The frame cracked.
Yup. My brand new S&W M&P, performance center no less, frame cracked at 800 or so rounds. That being said, I completely trust the guy who was shooting it. He seems like a great guy and definitely knows his firearms and how to handle them, so I am not faulting him at all for this. He is also handling this situation very well for me. He is going to deal with S&W directly with the faulty gun and as soon as he gets another of these guns in stock, he will give it to me (with paperwork and everything of course) He has been great to deal with through the whole process.
So, when I get my 2nd brand new Shield I will post another update.
-
@gdoolittle said:
Update on my Shield situation:Heard from the gun store owner i bought the gun from who I was having shoot my gun for diagnosis. He shot 200-250 rounds through the gun until, get this....
The frame cracked.
Yup. My brand new S&W M&P, performance center no less, frame cracked at 800 or so rounds. That being said, I completely trust the guy who was shooting it. He seems like a great guy and definitely knows his firearms and how to handle them, so I am not faulting him at all for this. He is also handling this situation very well for me. He is going to deal with S&W directly with the faulty gun and as soon as he gets another of these guns in stock, he will give it to me (with paperwork and everything of course) He has been great to deal with through the whole process.
So, when I get my 2nd brand new Shield I will post another update.
OK not heard of that before, good to hear you have a good gunshop to deal with

-
Wow, that's disappointing. :-\
-
Here is a picture that he sent.

-
Bloody hell.:o I though we were talking about some hairline crack, not the grand canyon! :ahhh
-
Good job that didn't fail while you were using it

-
Good job that didn't fail while you were using it

+1 Yikes!
Maybe you need to consider trading the replacement in on something else.
I would consider it but given the track record that s&w usually has and the fact that it is made in my own country I think I will stick with it. Plus the store owner didn't really offer to let me swap, he just offered me a new gun of the same model. If i were to swap though it would be for the Springfield xds.
-
I've seen polymer fail in that manner before. S&W Sigma, wasn't there when it happened but I've handled the corpse. You can find others like that. This looks like it sprung, the molding was wrong and the internal tensions were bad to begin with. Reason why Glock (both in Austria and the US made ones) get sonogrammed.
One question. Everything you fed it was jacketed, right? I've seen photos of a Glock that failed like this, after someone who couldn't read the manual had fed it a lot of soft cast bullets, not even gas checked. Ultimate THOU SHALT NOT with polygonal rifling- don't know if the M&P has that or not.
Also seen steel and aluminum frames fail more spectacularly.
-
Never been around when one let go (fortunately ) but have seen some of the results. Can happen with anything, but thankfully not common. Some years back in Virginia someone was killed when a shooter several lanes over put a modern load in an old damascus-barrel shotgun and it blew up.




-
@Smashie said:
I saw a post on twitter this morning that someone was confused as to the purpose of a four barrel rifle. It reminded me of the work by Johann Fanzoj and his Vierling safari riflehttp://www.fanzoj.com/en/gunroom/custom_built_weapons/other_rifles/vierling.html
Yeah <u>that's</u> awesome!!!
-
@ironraven said:
I've seen polymer fail in that manner before. S&W Sigma, wasn't there when it happened but I've handled the corpse. You can find others like that. This looks like it sprung, the molding was wrong and the internal tensions were bad to begin with. Reason why Glock (both in Austria and the US made ones) get sonogrammed.One question. Everything you fed it was jacketed, right? I've seen photos of a Glock that failed like this, after someone who couldn't read the manual had fed it a lot of soft cast bullets, not even gas checked. Ultimate THOU SHALT NOT with polygonal rifling- don't know if the M&P has that or not.
Also seen steel and aluminum frames fail more spectacularly.
Everything that i fed through it was mainstream manufacturer fmj and just 5 jhps so everything was jacketed.
-
Geeze, how did I miss this!!!!

Wow!!!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login