Swisstool X (Plus ?) - Initial thoughts.
-
@DaveK said:
Poncho / Micky / Roadie:I've persisted with it today, and it is getting easier with practice to open the tools, so you're spot on with that. It's had a proper work out today too, as I'm stripping a room and refurbishing it as an office, I've dismantled furniture, removed fixings from walls, put up guitar hanging brackets, changed plugs, fixed fuses, and probably other stuff that I've forgotten already :)
She's let me have half an hour for lunch ::) so here's a very quick overview of the Swisstool today so far:
**- Awl is superb - the sharpness is perfect for marking pilot holes for subsequent drilling.
- Bit Wrench - how did I ever manage without one of these? Two different allen keys (one in each end - always ready), makes disassembling Ikea furniture a doddle!
- Pliers - needed needle nose pliers a few times today, not yet found a use for the ST-X. Enter Core >:D
- Phillips. Sorry guys, it's pants. After scratching it up a bit on a stubborn screw holding a curtain rail up, and fearing that more force would actually twist it, I got the Core. It came straight out.**
It's doing OK, but so far the Core has had to bail it out a couple of times.
I'll update later, but to summarise this morning, I've warmed to it a bit, but it's not a serious contender so far.......
I agree with all those points. :) The phillips is the main let down with the Swisstool IMO.
-
Suppose I better have my say :D
Locks - I can't believe you don't like them :o I think they are the best on any tool out there . Much better then the Core which I found can be pressed accidently .
Nail Nicks - Your spot on about these and I keep my left thumb nail a little long for this reason . My other 9 nails I bite the hell out of .
Phillips Driver - After using alot of LMs lately I have to agree the phillips is pants :o
Like Mike said it does grow on you . The tools don't get easier to open but you learn over time the best way and it won't be a problem .
Dunc
-
Dunc - It's not the locks themselves that bother me, it's the release mechanism. I am getting on with them better now to be fair, but I still prefer the press motion of the Leatherman tools. This is almost certainly down to familiarity, I simply don't have to think about it with a Leatherman any more, it's like second nature. I've never accidentally released the lock on any Leatherman though.
Something I just remembered also related to the phillips. The "awkward" screw earlier was quite tight to reach, so I tried with the ST-X first, and then the Core with the handles "stretched", i.e. one handle opened, the other closed. One thing I have really become accustomed to with Leatherman tools, is that they are designed to be comfortable in this position, and recognise that the back of the leading handle is a natural place to exert force and generate some decent torque. I still have the dents in my thumb from trying this with the ST! When I eventually gave up and switched to the Core, it was sheer bliss! God bless plastic inserts ;)
As for persevering with it, I could and maybe it would grow on me a bit, but given that the phillips screwdriver is one of my most frequently used tools, I'll probably just make my life easier and use a LM :)
Oh a question! When looking at the outside of the handles in the closed position, there is a backspring that works on the pliers. On both sides it has a funny shaped "hole" which is too precise to be an accident. Any idea what they are for, or indeed why they are not solid?
-
Are you referring to the slot for the corkscrew? That can be used for a lanyard ring as well.
-
Haha - I love the way that the empty slots in the bit holder that the wrench clips to is sold as a feature:
- pliers
.... - bit wrench
...... - wrench for Hex 1/4"
37, space for additional bits
:D
- pliers
-
Or the crimper that isn't even a crimper!
-
@Leatherman123 said:
Or the crimper that isn't even a crimper!Oh yeah! What's that all about then?
-
I don't know! Its under the plier head, and it does the same as the pliers would! :ahhh
-
@Leatherman123 said:
I don't know! Its under the plier head, and it does the same as the pliers would! :ahhhLol - it looks like two bits of flat metal to me. Not so much a crimper as a squisher :D
To be fair, it's not just Vic that do this, I'm sure one of the LM user guides lists the handles as a feature (can't remember which one now).
-
Hmm, I've never seen that.. I'd like to know which one! I noticed that LM doesn't list all the tools. They list the large bit driver instead of the philips and 3/16 slotted driver..
-
I have to sort my stuff out in the next week or so as she is moving me into a smaller office / den / playroom :( , so I'll see if I can spot it and let you know.
-
I don't know! Its under the plier head, and it does the same as the pliers would! :ahhh
Lol - it looks like two bits of flat metal to me. Not so much a crimper as a squisher :D
To be fair, it's not just Vic that do this, I'm sure one of the LM user guides lists the handles as a feature (can't remember which one now).
I believe that the Core lists it as a crimper as well ::) :D and the Super Tool ;)
Glad you are getting a little more use to it
but I definitely know were you are coming from about the comfort of a LM :D I find myself going back to the familiarity of them everytimeNothing wrong with it though cause Mike does it with all the LM he gets ::) and goes back to the SwissTool everytime :D
But as I have already said it's apples and oranges LM and Vic ;) :D
-
Right!
Two more days of decorating and assembling flat-pack furniture has given the Swisstool a really good work-out, and given me an opportunity to get to know it a little better. Right now, the ST-X is caked up with plaster dust, and the blade is covered in a sticky residue from cutting tape. So it worked hard enough.
As the phillips was not up to the jobs I needed, I had my Core with me on stand-by, as I must have tightened hundreds of phillips screws / fixings in the last couple of days and the ST-X would have gone out of the window. I won't mention the phillips again >:(
OK, during the course of yesterday and today, I have been putting up shelves, building bookcases, desks and moving my network (routers, WAP, cabling etc) into my new "office" as SWMBO has booted me out of my old one. I've used various flat-head drivers, blade, saw, pliers, ruler, scissors and I think that's it. The approach was, try and use the ST-X first, and only reach for the Core if it couldn't hack it.
Overall, the ST-X has performed pretty well, and I've got used to the locks a bit, and have figured out how to open the tools I need a bit less painfully. In addition to the problem I said I wouldn't mention again (and I won't, honest) there were two other occasions when I had to give up and use the Core.
-
Cutting a square hole in plasterboard with the saw. The square tip of the ST-X's saw meant that it was impossible to start the cutting, whereas the Core has a pretty sharp point that made life a lot easier (and the hole a lot neater);
-
Retrieving dropped grub screws / pulling cables with pliers. On a number of occasions I had to use the Core's needle nose pliers, where the ST-X's wouldn't fit.
I have to say that I didn't find anything that the ST-X did better than the Core, but clearly I've found a few things that the Core definitely does better than the ST-X.
I think I've given it every chance, and been fair but I'm sticking with Leatherman, one of mine may rust one day (although they haven't yet), but I'd much rather have tools that can get the job done!
I shall clean it up and re-lube it and then decide what to do with it >:D
-
-
At least you gave it a good test. :)
-
-
Informative though all this is, what hasn't been mentioned and what I really want to know is, what evil did you do to get kicked out of the big office :P
:D
Neil
-
@NKB said:
Informative though all this is, what hasn't been mentioned and what I really want to know is, what evil did you do to get kicked out of the big office :P:D
Neil
Nothing, it's wrong I tells ya :P Nah, we need more space for the child-minding, so it's going to be a sort of playroom / cage :D
I'm in the new office now, and my network seems to be functioning OK, and it's nice with all new furniture, but a bit cramped. One bit of good news though, I have a length of wall big enough to hold Roadie's Leatherman timeline, and it looks great

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
