Swisstool X (Plus ?) - Initial thoughts.
-
Haha - I love the way that the empty slots in the bit holder that the wrench clips to is sold as a feature:
- pliers
.... - bit wrench
...... - wrench for Hex 1/4"
37, space for additional bits
:D
- pliers
-
Or the crimper that isn't even a crimper!
-
@Leatherman123 said:
Or the crimper that isn't even a crimper!Oh yeah! What's that all about then?
-
I don't know! Its under the plier head, and it does the same as the pliers would! :ahhh
-
@Leatherman123 said:
I don't know! Its under the plier head, and it does the same as the pliers would! :ahhhLol - it looks like two bits of flat metal to me. Not so much a crimper as a squisher :D
To be fair, it's not just Vic that do this, I'm sure one of the LM user guides lists the handles as a feature (can't remember which one now).
-
Hmm, I've never seen that.. I'd like to know which one! I noticed that LM doesn't list all the tools. They list the large bit driver instead of the philips and 3/16 slotted driver..
-
I have to sort my stuff out in the next week or so as she is moving me into a smaller office / den / playroom :( , so I'll see if I can spot it and let you know.
-
I don't know! Its under the plier head, and it does the same as the pliers would! :ahhh
Lol - it looks like two bits of flat metal to me. Not so much a crimper as a squisher :D
To be fair, it's not just Vic that do this, I'm sure one of the LM user guides lists the handles as a feature (can't remember which one now).
I believe that the Core lists it as a crimper as well ::) :D and the Super Tool ;)
Glad you are getting a little more use to it
but I definitely know were you are coming from about the comfort of a LM :D I find myself going back to the familiarity of them everytimeNothing wrong with it though cause Mike does it with all the LM he gets ::) and goes back to the SwissTool everytime :D
But as I have already said it's apples and oranges LM and Vic ;) :D
-
Right!
Two more days of decorating and assembling flat-pack furniture has given the Swisstool a really good work-out, and given me an opportunity to get to know it a little better. Right now, the ST-X is caked up with plaster dust, and the blade is covered in a sticky residue from cutting tape. So it worked hard enough.
As the phillips was not up to the jobs I needed, I had my Core with me on stand-by, as I must have tightened hundreds of phillips screws / fixings in the last couple of days and the ST-X would have gone out of the window. I won't mention the phillips again >:(
OK, during the course of yesterday and today, I have been putting up shelves, building bookcases, desks and moving my network (routers, WAP, cabling etc) into my new "office" as SWMBO has booted me out of my old one. I've used various flat-head drivers, blade, saw, pliers, ruler, scissors and I think that's it. The approach was, try and use the ST-X first, and only reach for the Core if it couldn't hack it.
Overall, the ST-X has performed pretty well, and I've got used to the locks a bit, and have figured out how to open the tools I need a bit less painfully. In addition to the problem I said I wouldn't mention again (and I won't, honest) there were two other occasions when I had to give up and use the Core.
-
Cutting a square hole in plasterboard with the saw. The square tip of the ST-X's saw meant that it was impossible to start the cutting, whereas the Core has a pretty sharp point that made life a lot easier (and the hole a lot neater);
-
Retrieving dropped grub screws / pulling cables with pliers. On a number of occasions I had to use the Core's needle nose pliers, where the ST-X's wouldn't fit.
I have to say that I didn't find anything that the ST-X did better than the Core, but clearly I've found a few things that the Core definitely does better than the ST-X.
I think I've given it every chance, and been fair but I'm sticking with Leatherman, one of mine may rust one day (although they haven't yet), but I'd much rather have tools that can get the job done!
I shall clean it up and re-lube it and then decide what to do with it >:D
-
-
At least you gave it a good test. :)
-
-
Informative though all this is, what hasn't been mentioned and what I really want to know is, what evil did you do to get kicked out of the big office :P
:D
Neil
-
@NKB said:
Informative though all this is, what hasn't been mentioned and what I really want to know is, what evil did you do to get kicked out of the big office :P:D
Neil
Nothing, it's wrong I tells ya :P Nah, we need more space for the child-minding, so it's going to be a sort of playroom / cage :D
I'm in the new office now, and my network seems to be functioning OK, and it's nice with all new furniture, but a bit cramped. One bit of good news though, I have a length of wall big enough to hold Roadie's Leatherman timeline, and it looks great

-
Result :DNeil
-
I tried to get a pic, but it's a small room and I don't have a wide angled lens! This is the best I could do:
It is a bit of a beggar to take a photo of isn't it!! What you should do is make a timeline with real tools instead of just pictures 8)
Hehe. I did actually consider that, but I don't have a Charge Ti (yet). I could do all the others though!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

