Braided wire cutting.
-
I am yet to cut braided wire with any of my Leathermans... but I notice one is meant to cut in an ever so slightly different place than when cutting hard wire.
When you look at their website for, say, the Surge http://www.leatherman.com/surge-3.html?dwvar_3_color=10&cgid=heavy-duty-multi-tools#start=1 and click on Stranded-Wire Cutters it says:
"Concave cutters located under plier jaws for use on Stranded wire - smaller gauge wire bundled or wrapped together to form a larger conductor. The concave shape helps to keep the shape of the strands without crushing them."It's very difficult to see the difference between the stranded-wire cutting area and the hard-wire cutting area... but I believe the former is the tiny concave part.
Nope, **under **the pliers jaws ... handle side of the pivot ...
-
They say under in their description, but their pic shows it as being the tiny concave part of the replaceable hard-wire cutters (see my post above).
I have heard others say this - you mean just above the crimpers?
-
@Syncop8r said:
They say under in their description, but their pic shows it as being the tiny concave part of the replaceable hard-wire cutters (see my post above).I have heard others say this - you mean just above the crimpers?
Yeah, I'm pretty sure it's the area just above the crimps
I think they did this on one of their others too. St300? Surge? -
Just checked on their website: Surge, ST300 and MUT all show stranded wire cutters above the head. So either their pics are wrong or perhaps their description is.
I couldn't find any other models with stranded-wire cutters.
It would be good to get to the bottom of this... -
@50ft-trad said:
They say under in their description, but their pic shows it as being the tiny concave part of the replaceable hard-wire cutters (see my post above).
I have heard others say this - you mean just above the crimpers?
Yeah, I'm pretty sure it's the area just above the crimps
I think they did this on one of their others too. St300? Surge?Also on the Core just above the crimpers handle side.
-
Eth's thread... Quick Test: MTs vs. Bike Break Cable
One of mine... High Tensile Wire Cutting Test, Warning: Minor Tool Abuse
The SwissTool and MP600 struggled with the bare steel braid, no issues when sheathed, the Surge and BlackTip cut both fine.
I've found cutting under tension does make a difference.
Leatherman should include the stranded wire cutters (yes they are on the handle side) on their smaller MTs like the Charge and Signal.
-
@tosh said:
Went upstairs and opened the LM storage box..... You know, I think LM need to go back to the drawing board!! Not a single model of theirs had the ability to cut through braided cable, Not even their EOD MUT!!...Yes it's the Signal I bought used. The seller said it as like new, just checked the cutter.....pristine...just tried the cable test...
.....Part Cut, part Crushed it!! Leatherman, you gotta be smurfting me!!
Make of this what you will, but I think it confirms to me that leatherman are just a joke. Oh' tested the OHT too....crushed it, surge crushed it, ST300 crushed it Wave crushed it, Juice crushed it.....Yawn! a pattern is beginning to emerge!
Whereabouts on the Leatherman pliers did you cut the wire?
-
@zoidberg said:
Eth's thread... Quick Test: MTs vs. Bike Break CableOne of mine... High Tensile Wire Cutting Test, Warning: Minor Tool Abuse
The SwissTool and MP600 struggled with the bare steel braid, no issues when sheathed, the Surge and BlackTip cut both fine.
I've found cutting under tension does make a difference.
Leatherman should include the stranded wire cutters (yes they are on the handle side) on their smaller MTs like the Charge and Signal.
Thanks. So Leatherman's pics on their site are wrong then.
-
@Syncop8r said:
Just checked on their website: Surge, ST300 and MUT all show stranded wire cutters above the head. So either their pics are wrong or perhaps their description is.
I couldn't find any other models with stranded-wire cutters.
It would be good to get to the bottom of this...It's no great mystery. The blue dot on their interactive feature guide is in the wrong place.
Please see their user guide.

I just did some of my own testing with some 3/32" (2.4mm) cable.
None of my standard copper wire cutting tools cut it acceptably. This includes linesman's pliers, Vise-grips, large diagonal cutters and an even larger crimper/cutter tool. My LM Wave didn't come close to cutting through it. My Swisstool tried to chew through it but was unsuccessful without adding extensive bending/fatiguing of the cable.
The MOST successful tool in my arsenal was my BO Surge, using a combination of the [correct] stranded wire cutter notch and then the regular wire cutters. I believe 1/16" (1.6mm) wire like my bike brake and shift cables would have fit in the stranded wire cutter notch and would have been cut cleanly, as all or the 3/32" cable that fit in the notch was.
"Rubbish" would not have been my choice for a tool that performed better than all my other tools, including tools that were designed for the specific task being tested. Then again, I don't have an agenda, while the posts of the OP make me wonder if I'm alone in this. -
Working at Best Buy construction I always tried to use my Wave, Charge or Surge to cut braided wire...worked 10% of the time. Always jam.

My savior was Knipex diagonal cutters. Never could find a reliable cutter on any of my multis. -
In my tests (in Etherearlicer's thread Zoidberg linked to above) the Spirit, Rebar and MP400 came out best at cutting stainless braided cable (bike brake cable). I haven't tried the Surge but will have a go today if I get chance.
-
Thanks for everyones input on this.
Yes, Etherealicers original thread is what made me assume the Spirit would come out top...but my own Spirit couldn't get through, took its bigger brother the swisstool to get the job done and with ease I must add.
I'll try again with LM's at my next opportunity, having said that I did try all the places on the plier head that have been listed above. Everytime the head just jammed and had to be forced apart using brute force or a screwdriver to pry open!! It really shouldn't be that difficult.
I'll stand by my "Rubbish" remark, I can't begin to say how appalled I was that the MUT EOD failed....WTF Leatherman!!Yes, I too love MT's, god only knows I have enough of 'em :D
And, I accept that ALL MT's (SAKs too) are a compromise in one way or another.....BUT, come on given the ridiculously high rrp of these tools they really should fair better than they have.Like I keep banging on about, I think its time they (Manufacturers) upp'd their game and transformed the MT into a serious tool and not just some cute plier with added gadget factor. It really does annoy me. These are very expensive items....very expensive! But yet cannot be relied upon 100%, which in my book makes them unsuitable for their proposed market.
I quite honestly couldn't give a toss about asthetics, colour, BO or SS, cute factor or tacticool what I need and dare I say demand, is a simple tool that can be relied upon, to that end I feel as though a high percentage simply fail to even achieve that.
"Rubbish" is the word
-
@tosh said:
Thanks for everyones input on this.
Yes, Etherealicers original thread is what made me assume the Spirit would come out top...but my own Spirit couldn't get through, took its bigger brother the swisstool to get the job done and with ease I must add.
I'll try again with LM's at my next opportunity, having said that I did try all the places on the plier head that have been listed above. Everytime the head just jammed and had to be forced apart using brute force or a screwdriver to pry open!! It really shouldn't be that difficult.
I'll stand by my "Rubbish" remark, I can't begin to say how appalled I was that the MUT EOD failed....WTF Leatherman!!Yes, I too love MT's, god only knows I have enough of 'em :D
And, I accept that ALL MT's (SAKs too) are a compromise in one way or another.....BUT, come on given the ridiculously high rrp of these tools they really should fair better than they have.Like I keep banging on about, I think its time they (Manufacturers) upp'd their game and transformed the MT into a serious tool and not just some cute plier with added gadget factor. It really does annoy me. These are very expensive items....very expensive! But yet cannot be relied upon 100%, which in my book makes them unsuitable for their proposed market.
I quite honestly couldn't give a toss about asthetics, colour, BO or SS, cute factor or tacticool what I need and dare I say demand, is a simple tool that can be relied upon, to that end I feel as though a high percentage simply fail to even achieve that.
"Rubbish" is the word
Lol Tosh this is how I feel about sogs files

-
Thanks for everyones input on this.
Yes, Etherealicers original thread is what made me assume the Spirit would come out top...but my own Spirit couldn't get through, took its bigger brother the swisstool to get the job done and with ease I must add.
I'll try again with LM's at my next opportunity, having said that I did try all the places on the plier head that have been listed above. Everytime the head just jammed and had to be forced apart using brute force or a screwdriver to pry open!! It really shouldn't be that difficult.
I'll stand by my "Rubbish" remark, I can't begin to say how appalled I was that the MUT EOD failed....WTF Leatherman!!Yes, I too love MT's, god only knows I have enough of 'em :D
And, I accept that ALL MT's (SAKs too) are a compromise in one way or another.....BUT, come on given the ridiculously high rrp of these tools they really should fair better than they have.Like I keep banging on about, I think its time they (Manufacturers) upp'd their game and transformed the MT into a serious tool and not just some cute plier with added gadget factor. It really does annoy me. These are very expensive items....very expensive! But yet cannot be relied upon 100%, which in my book makes them unsuitable for their proposed market.
I quite honestly couldn't give a toss about asthetics, colour, BO or SS, cute factor or tacticool what I need and dare I say demand, is a simple tool that can be relied upon, to that end I feel as though a high percentage simply fail to even achieve that.
"Rubbish" is the word
Lol Tosh this is how I feel about sogs files

Just curious: when almost all files fail a particular test, would you repeatedly single out only one of the brands repeatedly and subject only it to your scorn and derision? Or might that show a bias?
-
Isn't this more about anvil vs. bypass cutters and less of a quality issue

-
Thanks for everyones input on this.
Yes, Etherealicers original thread is what made me assume the Spirit would come out top...but my own Spirit couldn't get through, took its bigger brother the swisstool to get the job done and with ease I must add.
I'll try again with LM's at my next opportunity, having said that I did try all the places on the plier head that have been listed above. Everytime the head just jammed and had to be forced apart using brute force or a screwdriver to pry open!! It really shouldn't be that difficult.
I'll stand by my "Rubbish" remark, I can't begin to say how appalled I was that the MUT EOD failed....WTF Leatherman!!Yes, I too love MT's, god only knows I have enough of 'em :D
And, I accept that ALL MT's (SAKs too) are a compromise in one way or another.....BUT, come on given the ridiculously high rrp of these tools they really should fair better than they have.Like I keep banging on about, I think its time they (Manufacturers) upp'd their game and transformed the MT into a serious tool and not just some cute plier with added gadget factor. It really does annoy me. These are very expensive items....very expensive! But yet cannot be relied upon 100%, which in my book makes them unsuitable for their proposed market.
I quite honestly couldn't give a toss about asthetics, colour, BO or SS, cute factor or tacticool what I need and dare I say demand, is a simple tool that can be relied upon, to that end I feel as though a high percentage simply fail to even achieve that.
"Rubbish" is the word
Lol Tosh this is how I feel about sogs files

Just curious: when almost all files fail a particular test, would you repeatedly single out only one of the brands repeatedly and subject only it to your scorn and derision? Or might that show a bias?
I can't speak for the others, but I personally would weight the level of criticism based on how deficient the tool appears to be. Sometimes it warrents a negative comment, and sometimes a full weight rant - possibly even repeatedly ::) :D On that basis, SOG would indeed be criticised more than other makers :P >:D as I'm with Zed in considering the SOG files to be particularly poor

-
Here's a question: Is braided wire something that ANY pliers should be expected to cut easily?
-
@Syncop8r said:
Here's a question: Is braided wire something that ANY pliers should be expected to cut easily?IMO, no. It's a tricky task, particularly if the wire is hard material like stainless. I wouldn't expect a typical linesman's pliers with diagonal cutters to perform that well. You really need hard, sharp and close fitting bypass cutters that don't allow the cable to flatten as you cut it. In theory, the Surge/Rebar/MUT/OHT/Signal should be ideal for this, but there's obviously some variation in performance. IMO, the cast plier heads that most (all?) manufacturers use aren't up to repeated use on hard braided wire. Clean cuts on softer braided wire like copper seems to be dependent on a close fit between the two halves of the pliers head (if a bypass style) or accuracy of the cutting edges meeting (if side-cutter style, like the Wingman/Sidekick).
-
OK, so maybe we're expecting too much of them then. Any other opinions on this?

New Page Banana Dance

-
@Syncop8r said:
OK, so maybe we're expecting too much of them then. Any other opinions on this?
I completely disagree...
The whole attraction of the MT over a SAK is primarily the plier feature - if the MT were basically a bloated balisong with additional tools within, then fair do's.....horses for courses.But it ain't !
The MT is ultimately built around the ability to be used as a traditional pair of pliers - and therein lies the attraction.
It's pretty rich therefore to suddenly have to accept the plier concept is actually the archiles heel of the whole tool.
Clearly, the manufacturers haven't grasped what pliers are expected to do on a day to day basis. I cannot think of ANY plier manufacturer whose added replaceable carbide cutters - they simply used the correct steel first off.
Maybe MT manufacturers need to swallow their pride and accept their products are not upto industry standards - it would be wonderful if say SOG took advice from knipex, or Leatherman from Wera etc etc.
Suddenly the MT would have real stature and be able to hold its own.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login