Shop projects
-
Oh that's cool, I've thought a few times of making a self stamp for on my leather work and maybe some other stuff and also saw those exspencive custom one, forget that, I don't do enough to get that done! But just a brass knob filed down, cool, that would take some patients to do my "JR" but that's a slick idea!

JR -
Maybe Tofty could help 3d printing one to you.
-
Getting one made won't be cheap. 3D metal printing maybe cheaper?
That's a good idea

another good idea

I think I really need a CNC router :ahhh
JR, a lot of brass furniture knobs are hollow, good luck in finding some

Patience and a steady hand is all you need
-
Nice

Getting one made won't be cheap. 3D metal printing maybe cheaper?
That's a good idea

another good idea

I think I really need a CNC router :ahhh
JR, a lot of brass furniture knobs are hollow, good luck in finding some

Patience and a steady hand is all you need
Yeah, I know there mostly hollow, I got a leather punch that I really don't use and thought of using but it isn't brass, and it would need a extension of some sort, I just really like how you did yours!
JR -
Nice

Getting one made won't be cheap. 3D metal printing maybe cheaper?
That's a good idea

another good idea

I think I really need a CNC router :ahhh
JR, a lot of brass furniture knobs are hollow, good luck in finding some

Patience and a steady hand is all you need
Yeah, I know there mostly hollow, I got a leather punch that I really don't use and thought of using but it isn't brass, and it would need a extension of some sort, I just really like how you did yours!
JRThanks JR

Brass seems to be a good compromise, not too hard that its to hard to work on but (I hope) hard enough to last for a good amount of time
-
Just a thought but how about making it out of wax then getting it investment cast in brass?
-
@Smashie said:
Just a thought but how about making it out of wax then getting it investment cast in brass?I have thought of that Mate but it needs to be small enough to fit on things like an axe handle (so I'm thinking about 25mm)
after casting I would still have to finish it off with a dremel and I don't think I can work that smallThe idea of carrying on with the 415 after the Sparky415 didn't work was to see if it was doable/useable and to see how small I could work with the dremel
-
Just what are you trying to fit and in how small?
JR -
This image, about an inch across

There's a little more about it here
/topic/70600 -
@Sparky415 said:
This image, about an inch across

There's a little more about it here
/topic/70600Ok, so yo pretty much got the 415 the size, but you just didn't get the Sparky arched over, and that's totally the design your after? And it's to be heated and or stamped?
JR -
No, the 415 numbers are bigger than the first one I tried
and I think I have settled on the first design
Yes the idea is to heat it up for wood and just cold press it in to leather

-
@Sparky415 said:
No, the 415 numbers are bigger than the first one I tried
and I think I have settled on the first design
Yes the idea is to heat it up for wood and just cold press it in to leather

I was going to ask if you wanted a diff design, but there are a few company's out there that aren't to bad on custom irons, but yeah they can get a little pricy!
JR -
Next little project (sorry not enough pictures)
I'm still packing stuff away from the meet ::)
I need to find somewhere to store these little Gaz canisters safely
I have some spare PVC about the right size and 5ft/1.5m long, bits of wood, cork, foam etc

I came up with this
It's open at the top, there's about 15 in there so far, they just pop out the bottom as you pull the strap


-
Good idea!
Long way to drop for the first ones though. -
Yep it's quite a drop,
I had a cork disk in the bottom first then changed it to some camping mat and...
now I'm inserting them from the bottom :) -
Not a prototype for a home made gas mortar then?
-
I did think that when I dropped the first one in from the top

I'm loading from the bottom now :) -
Perhaps it could tilt for safer toploading?
-
@Sparky415 said:
I did think that when I dropped the first one in from the top
I'm loading from the bottom now :)Just remember, you're only supposed blow the bloody doors off :D
-
@Sparky415 said:
Yep it's quite a drop,
I had a cork disk in the bottom first then changed it to some camping mat and...
now I'm inserting them from the bottom :)Must..........resist...........temptation.............not ....my.....job......pfrsantos...........aaaarghhhhhhhh :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login