A little Graphics help needed
-
Thanks Boss,
That's why I asked,
I think it's a bit beyond my ability with Paint
-
What kind of font etc. do you want. I don't have any of the software to give you anything "professional" but it would seem like this is simple enough to do with some wordart and paint. But I guess you (or more like the ones you order from) want it in a format more suitable for a CNC/3D printer.
-
It just needs to be a jpeg 42,

I have paint but I can't get the word Sparky to curve around inside the oval
-
draw it by hand, then take a photograph :)
-
I think I'll be able to do it with visio tomorrow at work for you. I'll give it a go
-
I'm not entirely sure what you're looking for. So a stamp for leather making, are the oval shapes going to be visible in the depression? Also, I personally don't typically like when type is warped on a curve or circular. (It can of course be done properly.) And Im not sure the Palatino typeface lends itself well to a curve, see the way the Y distorts off the end. You may want another font, maybe just initials in a logotype shape with the 415 would be possible, maybe a block shape.
I had a couple minutes to spare, not sure this would even help you though. Good luck
-
Best I can do with my meager skills and tools. Font is a bit different but that's as close as I could get on Photobucket editing
<a href="http://s86.photobucket.com/user/asc67/media/Sparky logo.2_zpsakvldkf6.png.html" target="_blank" rel="noopener noreferrer"><img src="http://i86.photobucket.com/albums/k115/asc67/Sparky logo.2_zpsakvldkf6.png" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Kaput, I understand what you are saying about the letters but I have to try it

That first one is exactly what I am looking for

The second one is really cool!
Steve and all you other Guys thanks for your help, I think I am sorted now but will get back to you if I need to, thanks for your help

Deeks..... I'm speechless :ahhh

-
Here's an update of where I've got to on this project
And thanks again for helping GuysI thought I would give DIY a try

I've got a little brass knob ::)

Bolt it to a piece of wood and flaten the top

Copy paste glue

Not going so well, letters are too small and my fingers are too big :(

Sand back and start again
Lets try some bigger letters, no room, try just the numbers this time

That's working better


Add some heat

Not too bad (happy :D )

Make a Walnut handle

Well I'm happy enough but it's a shame I couldn't get the smaller one to work on there,
guess I will have to throw some money at it if I want it done properly
-
saw this video and thought of this thread... straight lines might be easier to pull off...
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Thanks for that Whoey

But I'm in talks with a Guy to make one for me...
:D -
Cool idea Tony
look forward to seeing it on the leather 
-
@Sparky415 said:
Kaput, I understand what you are saying about the letters but I have to try it
That first one is exactly what I am looking for

The second one is really cool!
Steve and all you other Guys thanks for your help, I think I am sorted now but will get back to you if I need to, thanks for your help

Deeks..... I'm speechless :ahhh

Whats the width you want for your stamp? I can import it into my CAD software and see what the detail would look like when cut with a 1/16" end mill. I cut odd shapes alot lately in brass so its something I could do pretty quick.
-
Kaput, I understand what you are saying about the letters but I have to try it

That first one is exactly what I am looking for

The second one is really cool!
Steve and all you other Guys thanks for your help, I think I am sorted now but will get back to you if I need to, thanks for your help

Deeks..... I'm speechless :ahhh

Whats the width you want for your stamp? I can import it into my CAD software and see what the detail would look like when cut with a 1/16" end mill. I cut odd shapes alot lately in brass so its something I could do pretty quick.
Syph, That is very kind of you but I have just started negotiations with a Guy so I don't want to mess him about as he has put his time in to the job already

If he can't do it I will certainly give you a shout
-
Kaput, I understand what you are saying about the letters but I have to try it

That first one is exactly what I am looking for

The second one is really cool!
Steve and all you other Guys thanks for your help, I think I am sorted now but will get back to you if I need to, thanks for your help

Deeks..... I'm speechless :ahhh

Whats the width you want for your stamp? I can import it into my CAD software and see what the detail would look like when cut with a 1/16" end mill. I cut odd shapes alot lately in brass so its something I could do pretty quick.
Syph, That is very kind of you but I have just started negotiations with a Guy so I don't want to mess him about as he has put his time in to the job already

If he can't do it I will certainly give you a shout
No problem! I had a look and I think scaled to the size you want it would take a smaller bit than I have anyhow to get the detail. :)
-
Update
Thanks to everyone who gave me their help with this
In the end after talking to Peter (Tofty) he designed and had made for me these stamps

Thanks Peter for your time and patience

You can't really see the stamp in the leather square,
I think I need softer leather or to wet the leather or a better press
-
Looking really good Tony

-
Peters picture


-
Nice !

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
