A little Graphics help needed
-
saw this video and thought of this thread... straight lines might be easier to pull off...
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Thanks for that Whoey

But I'm in talks with a Guy to make one for me...
:D -
Cool idea Tony
look forward to seeing it on the leather 
-
@Sparky415 said:
Kaput, I understand what you are saying about the letters but I have to try it
That first one is exactly what I am looking for

The second one is really cool!
Steve and all you other Guys thanks for your help, I think I am sorted now but will get back to you if I need to, thanks for your help

Deeks..... I'm speechless :ahhh

Whats the width you want for your stamp? I can import it into my CAD software and see what the detail would look like when cut with a 1/16" end mill. I cut odd shapes alot lately in brass so its something I could do pretty quick.
-
Kaput, I understand what you are saying about the letters but I have to try it

That first one is exactly what I am looking for

The second one is really cool!
Steve and all you other Guys thanks for your help, I think I am sorted now but will get back to you if I need to, thanks for your help

Deeks..... I'm speechless :ahhh

Whats the width you want for your stamp? I can import it into my CAD software and see what the detail would look like when cut with a 1/16" end mill. I cut odd shapes alot lately in brass so its something I could do pretty quick.
Syph, That is very kind of you but I have just started negotiations with a Guy so I don't want to mess him about as he has put his time in to the job already

If he can't do it I will certainly give you a shout
-
Kaput, I understand what you are saying about the letters but I have to try it

That first one is exactly what I am looking for

The second one is really cool!
Steve and all you other Guys thanks for your help, I think I am sorted now but will get back to you if I need to, thanks for your help

Deeks..... I'm speechless :ahhh

Whats the width you want for your stamp? I can import it into my CAD software and see what the detail would look like when cut with a 1/16" end mill. I cut odd shapes alot lately in brass so its something I could do pretty quick.
Syph, That is very kind of you but I have just started negotiations with a Guy so I don't want to mess him about as he has put his time in to the job already

If he can't do it I will certainly give you a shout
No problem! I had a look and I think scaled to the size you want it would take a smaller bit than I have anyhow to get the detail. :)
-
Update
Thanks to everyone who gave me their help with this
In the end after talking to Peter (Tofty) he designed and had made for me these stamps

Thanks Peter for your time and patience

You can't really see the stamp in the leather square,
I think I need softer leather or to wet the leather or a better press
-
Looking really good Tony

-
Peters picture


-
Nice !

-
Thanks Guys,

I just need to practice now -
Will you be using them on your pvc dress Tony?

-
That will be just between you and me ;)
-
Nice one Tony. Tofty did a great job on those

Does that mean all future shop projects will now have the official Sparky415 seal of approval?
-
Yes he did

Maybe :D
It seems hard to burn a stamp in to a handle which is what I wanted to try, on curved wood it kinda slides while it is hot and blurs the image
Also I'm not sure how well the stamp will hold up to heating with a blowlamp but it's all an experiment
I need to practice -
Just a thought, Tony. Could you drill a teeny hole through the "1" and put a pin through from the back, just proud of the surface? This will give you a fixed point to rock the stamp around to make sure you get the whole logo branded, without it sliding.
-
Thanks Al,
Not a bad idea
but I think I will try heating and holding the stamp upright in a vice and try rolling the wood across the stamp
-
Alternatively, would it not be an idea to use a drill stand with an electric drill (kept stationary in rotation) and a vice? At least the stamp would be guided vertically, with little sideways play. Start with the object in the vice, heat the stamp and move it down? You may need to fashion something to hold the stamp in the drill chuck...
Sent on my SM-G930F with Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

