I Recently Converted My Alox Mod to Torx
-
I asked for it, didn't I?

-
@Pablo O'Brien said:
I asked for it, didn't I?
You can't help yourself this morning can you P? :D
-
Getting peened heads to look good is a practice thing. Lots of it.
Also the torx pivots were made by someone else with a cnc machine and not anyone here. The "brass" pivots are not brass but a special copper that was heat treated. They were made specifically for me to my specs. As Syph can tell you quality matters when it comes to pivots.
Btw, I'm still around and lurk in the shadows always watching. -
Hey Steven, nice to know your still around... Guess you know the next question some will be asking... Can we still get some? :lol:
Sent from my iPhone using Tapatalk
-
Steve,
Do you remember the actual specs of the "special copper" matwrial that you used.
I'm considering getting some pivots made as l can't make myself pay close to $100 to order a handful of pivots from Alpha Knife Supplies ($ 50 min order plus international postage plus the exchange rate).
Cheers
George -
Would the 1/8" ones not be easy to convert to 3mm by screwing them onto a hex head bolt held in a drill chuck, spinning it up and sanding down a little on a bit of emery? There's very little between the two sizes, so I wouldn't have thought that the wall thickness reduction would be detrimental
-
The 1/8" pivots are hardened stainless.
-
The pivots were part of a deal I had with Tattoosteve99... An awesome guy and friend... A good person to deal with...
Sent from my iPhone using Tapatalk
First of all, great mod!!

As george1 said,@george1 said:
"...I've been holding off on buying the 1/8" pivots from the recommended place as they have a $US 50 minimum order (not including postage) for overseas buyers..."I've also been searching everywhere for just the right size pivots, but no luck so far... until now!! This is maybe great news... if stock still exists
@tattoosteve99 said:
Getting peened heads to look good is a practice thing. Lots of it.
Also the torx pivots were made by someone else with a cnc machine and not anyone here. The "brass" pivots are not brass but a special copper that was heat treated. They were made specifically for me to my specs. As Syph can tell you quality matters when it comes to pivots.
Btw, I'm still around and lurk in the shadows always watching.Are there any pivots left?
I'd gladly take a set of them off your hands. I'll shoot you a PM. -
What was the length of the pivots used for this mod?
It seems that the longest 1/8" pivot that are available are 0.5" and the longest 3.0mm tap that l can find is about 14 mm.
I'm now thinking that if l get some 3.0mm pivots made, the tapped hole wont go all the way through. -
The pivot barrels are 0.5" in length...
Sent from my iPhone using Tapatalk
-
@george1 said:
What was the length of the pivots used for this mod?
It seems that the longest 1/8" pivot that are available are 0.5" and the longest 3.0mm tap that l can find is about 14 mm.
I'm now thinking that if l get some 3.0mm pivots made, the tapped hole wont go all the way through.When I made mine I drilled through from one end - the flute length on a standard 1.6mm drill (tapping drill for M2) is around 20mm - then tapped from each end. The slight mismatch in threads in the centre shouldn't matter.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

