CyberTool owners thread
-
@glenfiddich1983 said:
No they don't. After the CyberTool fell apart I dropped three more SAKs, just as a test. And guess what happened?
That's it. I'm selling my SAKs and order my new ones via AliExpress!
@captain spaulding said:
I have a CT34 that I use all the time and has a interesting story behind it. Also have a CT41 thats NIB I may sell but Im not sure yet.
You can't make mention of an interesting story and not tell it! So spill it mister!

-
No they don't. After the CyberTool fell apart I dropped three more SAKs, just as a test. And guess what happened?

That's it. I'm selling my SAKs and order my new ones via AliExpress!
@captain spaulding said:
I have a CT34 that I use all the time and has a interesting story behind it. Also have a CT41 thats NIB I may sell but Im not sure yet.
You can't make mention of an interesting story and not tell it! So spill it mister!

Well, one day I listed a Juice CS4 for trade on the forum and one of our members showed interest. We decided to do a trade and when we exchanged addresses we found we lived in the same city. Obviously we just decided to meet up locally the next day. We decided to meet about 5 minutes away from my house. As I was getting ready to leave I noticed the neighbor across the street leaving his house as well. We both headed in the same direction and made our way down to the meeting spot. Funny thing is it turns out my neighbor across the street from me was the person I was meeting. We made the trade, had a laugh, and became friends. We used to show each other new tools, lights, whatever. He is the reason I got into Zebralights. We both ended up moving and he does not check the forums much anymore, but every time I use that CT34 I think about that day.

Funny thing is I am meeting another member today that lives one city over. We have met for a deal before though.
-
Wow and the scales and brass parts just disappeared?
Another thread taken over by the Dutch :D
Maybe the brass parts were never there in the first place, it would explain a lot!
:P
BTW that's a nice story Captain!
-
@captain spaulding said:
Well, one day...Spoiler:
I listed a Juice CS4 for trade on the forum and one of our members showed interest. We decided to do a trade and when we exchanged addresses we found we lived in the same city. Obviously we just decided to meet up locally the next day. We decided to meet about 5 minutes away from my house. As I was getting ready to leave I noticed the neighbor across the street leaving his house as well. We both headed in the same direction and made our way down to the meeting spot. Funny thing is it turns out my neighbor across the street from me was the person I was meeting. We made the trade, had a laugh, and became friends. We used to show each other new tools, lights, whatever. He is the reason I got into Zebralights. We both ended up moving and he does not check the forums much anymore, but every time I use that CT34 I think about that day.
Funny thing is I am meeting another member today that lives one city over. We have met for a deal before though.
Well, that is an interesting story indeed! Thanks for sharing!

-
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would? I rarely encounter Pozidrive screws (had to look them up to even see what they were), so would Pozidrive drivers on a Cybertool be less useful to me because of that? Are there any advantages to having Pozidrive drivers over normal ones?
-
@GoatDragon said:
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would? I rarely encounter Pozidrive screws (had to look them up to even see what they were), so would Pozidrive drivers on a Cybertool be less useful to me because of that? Are there any advantages to having Pozidrive drivers over normal ones?
I don't know about the Cybertool bits, but around here, 4/5 of the cross screws are pozidrive, not philips. >:(
And Victorinox doesn't make an inline pozidrive driver of the same type as the inline philips driver.
So I had to cut a slot in a 1/4 pozidrive bit to make it fit on the bottle opener, so that my SAK can actually deal with the most common cross screw around here. :ahhh -
@GoatDragon said:
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would? I rarely encounter Pozidrive screws (had to look them up to even see what they were), so would Pozidrive drivers on a Cybertool be less useful to me because of that? Are there any advantages to having Pozidrive drivers over normal ones?
It will work, but the fit won't be 100% so this will wear out the screw, bit or both faster.
So yes, they will serve you less.
You can also buy a new bit (usualy around €4 here) that is a Philips. -
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would? I rarely encounter Pozidrive screws (had to look them up to even see what they were), so would Pozidrive drivers on a Cybertool be less useful to me because of that? Are there any advantages to having Pozidrive drivers over normal ones?
It will work, but the fit won't be 100% so this will wear out the screw, bit or both faster.
So yes, they will serve you less.
You can also buy a new bit (usualy around €4 here) that is a Philips.That's what I suspected, darn.
The only bits I can find for sale on Amazon or eBay are the same four that come with the Cybertool. The closest I can find is this "positive bit" phillips, which sounds like someone making a listing who doesn't have any clue that posidrive is actually a word. The picture of the product does look like a normal phillips to me, however. That being said, I don't know if I have ever seen a posidrive screw or screwdriver/bit in person before so I am hardly an expert on telling them apart.
Any idea where I can buy the normal phillips bit you speak of?
-
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would? I rarely encounter Pozidrive screws (had to look them up to even see what they were), so would Pozidrive drivers on a Cybertool be less useful to me because of that? Are there any advantages to having Pozidrive drivers over normal ones?
It will work, but the fit won't be 100% so this will wear out the screw, bit or both faster.
So yes, they will serve you less.
You can also buy a new bit (usualy around €4 here) that is a Philips.That's what I suspected, darn.
The only bits I can find for sale on Amazon or eBay are the same four that come with the Cybertool. The closest I can find is this "positive bit" phillips, which sounds like someone making a listing who doesn't have any clue that posidrive is actually a word. The picture of the product does look like a normal phillips to me, however. That being said, I don't know if I have ever seen a posidrive screw or screwdriver/bit in person before so I am hardly an expert on telling them apart.
Any idea where I can buy the normal phillips bit you speak of?
I was in a store during my vacation 2 weeks ago which had an INSANE stock and he had all bits available.
No such luck with my local retailer but you might want to check yours.Posidriv screws became more common then regular Philips here troughout the years.
-
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would? I rarely encounter Pozidrive screws (had to look them up to even see what they were), so would Pozidrive drivers on a Cybertool be less useful to me because of that? Are there any advantages to having Pozidrive drivers over normal ones?
It will work, but the fit won't be 100% so this will wear out the screw, bit or both faster.
So yes, they will serve you less.
You can also buy a new bit (usualy around €4 here) that is a Philips.That's what I suspected, darn.
The only bits I can find for sale on Amazon or eBay are the same four that come with the Cybertool. The closest I can find is this "positive bit" phillips, which sounds like someone making a listing who doesn't have any clue that posidrive is actually a word. The picture of the product does look like a normal phillips to me, however. That being said, I don't know if I have ever seen a posidrive screw or screwdriver/bit in person before so I am hardly an expert on telling them apart.
Any idea where I can buy the normal phillips bit you speak of?
I was in a store during my vacation 2 weeks ago which had an INSANE stock and he had all bits available.
No such luck with my local retailer but you might want to check yours.Posidriv screws became more common then regular Philips here troughout the years.
Unfortunatly, Victorinox retail stores are hard to come by here in America. I checked google maps for them recently, and the only one that had existed in my entire state was marked as permanently closed. Gotta be online for order for me.
-
[quote author=GoatDragon link=topic=50953.msg1538481#msg1538481 date=1502863431]
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would? I rarely encounter Pozidrive screws (had to look them up to even see what they were), so would Pozidrive drivers on a Cybertool be less useful to me because of that? Are there any advantages to having Pozidrive drivers over normal ones?
It will work, but the fit won't be 100% so this will wear out the screw, bit or both faster.
So yes, they will serve you less.
You can also buy a new bit (usualy around €4 here) that is a Philips.That's what I suspected, darn.
The only bits I can find for sale on Amazon or eBay are the same four that come with the Cybertool. The closest I can find is this "positive bit" phillips, which sounds like someone making a listing who doesn't have any clue that posidrive is actually a word. The picture of the product does look like a normal phillips to me, however. That being said, I don't know if I have ever seen a posidrive screw or screwdriver/bit in person before so I am hardly an expert on telling them apart.
Any idea where I can buy the normal phillips bit you speak of?
I was in a store during my vacation 2 weeks ago which had an INSANE stock and he had all bits available.
No such luck with my local retailer but you might want to check yours.Posidriv screws became more common then regular Philips here troughout the years.
Unfortunatly, Victorinox retail stores are hard to come by here in America. I checked google maps for them recently, and the only one that had existed in my entire state was marked as permanently closed. Gotta be online for order for me.
[/quote]That's a bummer :/ -
only CYBER in my collection

-
@GoatDragon said:
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would?
Left to right: Phillips 0, Vic Cybertool 0, Pozi 0. The Cybertool bits are Phillips not pozi. But like all Phillips drivers, with care they will generally work OK on a pozi screw. Better than the other way around - using a pozi driver on a Phillips screw is usually a disaster.

-
-
Left to right: Phillips 0, Vic Cybertool 0, Pozi 0. The Cybertool bits are Phillips not pozi.
...and that was the last that was ever seen of it, because immediately after taking this photo I dropped it, it rolled under a cabinet, and disappeared into some alternate dimension!

Are you Pozi-tive it's gone?
-
@Archibald Tuttle said:
Left to right: Phillips 0, Vic Cybertool 0, Pozi 0. The Cybertool bits are Phillips not pozi.
...and that was the last that was ever seen of it, because immediately after taking this photo I dropped it, it rolled under a cabinet, and disappeared into some alternate dimension!

Are you Pozi-tive it's gone?
This calls for a closer Philinspection...
-
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would?
Left to right: Phillips 0, Vic Cybertool 0, Pozi 0. The Cybertool bits are Phillips not pozi. But like all Phillips drivers, with care they will generally work OK on a pozi screw. Better than the other way around - using a pozi driver on a Phillips screw is usually a disaster.
This is good too hear with my cybertool in the mail. Any idea why the wiki says the bit is posidrive? Perhaps it comes both ways depending on manufacture date and/or market?
-
@Archibald Tuttle said:
Left to right: Phillips 0, Vic Cybertool 0, Pozi 0. The Cybertool bits are Phillips not pozi.
...and that was the last that was ever seen of it, because immediately after taking this photo I dropped it, it rolled under a cabinet, and disappeared into some alternate dimension!

Are you Pozi-tive it's gone?
This calls for a closer Philinspection...
He's screwed.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

