CyberTool owners thread
-
@GoatDragon said:
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would? I rarely encounter Pozidrive screws (had to look them up to even see what they were), so would Pozidrive drivers on a Cybertool be less useful to me because of that? Are there any advantages to having Pozidrive drivers over normal ones?
It will work, but the fit won't be 100% so this will wear out the screw, bit or both faster.
So yes, they will serve you less.
You can also buy a new bit (usualy around €4 here) that is a Philips. -
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would? I rarely encounter Pozidrive screws (had to look them up to even see what they were), so would Pozidrive drivers on a Cybertool be less useful to me because of that? Are there any advantages to having Pozidrive drivers over normal ones?
It will work, but the fit won't be 100% so this will wear out the screw, bit or both faster.
So yes, they will serve you less.
You can also buy a new bit (usualy around €4 here) that is a Philips.That's what I suspected, darn.
The only bits I can find for sale on Amazon or eBay are the same four that come with the Cybertool. The closest I can find is this "positive bit" phillips, which sounds like someone making a listing who doesn't have any clue that posidrive is actually a word. The picture of the product does look like a normal phillips to me, however. That being said, I don't know if I have ever seen a posidrive screw or screwdriver/bit in person before so I am hardly an expert on telling them apart.
Any idea where I can buy the normal phillips bit you speak of?
-
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would? I rarely encounter Pozidrive screws (had to look them up to even see what they were), so would Pozidrive drivers on a Cybertool be less useful to me because of that? Are there any advantages to having Pozidrive drivers over normal ones?
It will work, but the fit won't be 100% so this will wear out the screw, bit or both faster.
So yes, they will serve you less.
You can also buy a new bit (usualy around €4 here) that is a Philips.That's what I suspected, darn.
The only bits I can find for sale on Amazon or eBay are the same four that come with the Cybertool. The closest I can find is this "positive bit" phillips, which sounds like someone making a listing who doesn't have any clue that posidrive is actually a word. The picture of the product does look like a normal phillips to me, however. That being said, I don't know if I have ever seen a posidrive screw or screwdriver/bit in person before so I am hardly an expert on telling them apart.
Any idea where I can buy the normal phillips bit you speak of?
I was in a store during my vacation 2 weeks ago which had an INSANE stock and he had all bits available.
No such luck with my local retailer but you might want to check yours.Posidriv screws became more common then regular Philips here troughout the years.
-
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would? I rarely encounter Pozidrive screws (had to look them up to even see what they were), so would Pozidrive drivers on a Cybertool be less useful to me because of that? Are there any advantages to having Pozidrive drivers over normal ones?
It will work, but the fit won't be 100% so this will wear out the screw, bit or both faster.
So yes, they will serve you less.
You can also buy a new bit (usualy around €4 here) that is a Philips.That's what I suspected, darn.
The only bits I can find for sale on Amazon or eBay are the same four that come with the Cybertool. The closest I can find is this "positive bit" phillips, which sounds like someone making a listing who doesn't have any clue that posidrive is actually a word. The picture of the product does look like a normal phillips to me, however. That being said, I don't know if I have ever seen a posidrive screw or screwdriver/bit in person before so I am hardly an expert on telling them apart.
Any idea where I can buy the normal phillips bit you speak of?
I was in a store during my vacation 2 weeks ago which had an INSANE stock and he had all bits available.
No such luck with my local retailer but you might want to check yours.Posidriv screws became more common then regular Philips here troughout the years.
Unfortunatly, Victorinox retail stores are hard to come by here in America. I checked google maps for them recently, and the only one that had existed in my entire state was marked as permanently closed. Gotta be online for order for me.
-
[quote author=GoatDragon link=topic=50953.msg1538481#msg1538481 date=1502863431]
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would? I rarely encounter Pozidrive screws (had to look them up to even see what they were), so would Pozidrive drivers on a Cybertool be less useful to me because of that? Are there any advantages to having Pozidrive drivers over normal ones?
It will work, but the fit won't be 100% so this will wear out the screw, bit or both faster.
So yes, they will serve you less.
You can also buy a new bit (usualy around €4 here) that is a Philips.That's what I suspected, darn.
The only bits I can find for sale on Amazon or eBay are the same four that come with the Cybertool. The closest I can find is this "positive bit" phillips, which sounds like someone making a listing who doesn't have any clue that posidrive is actually a word. The picture of the product does look like a normal phillips to me, however. That being said, I don't know if I have ever seen a posidrive screw or screwdriver/bit in person before so I am hardly an expert on telling them apart.
Any idea where I can buy the normal phillips bit you speak of?
I was in a store during my vacation 2 weeks ago which had an INSANE stock and he had all bits available.
No such luck with my local retailer but you might want to check yours.Posidriv screws became more common then regular Philips here troughout the years.
Unfortunatly, Victorinox retail stores are hard to come by here in America. I checked google maps for them recently, and the only one that had existed in my entire state was marked as permanently closed. Gotta be online for order for me.
[/quote]That's a bummer :/ -
only CYBER in my collection

-
@GoatDragon said:
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would?
Left to right: Phillips 0, Vic Cybertool 0, Pozi 0. The Cybertool bits are Phillips not pozi. But like all Phillips drivers, with care they will generally work OK on a pozi screw. Better than the other way around - using a pozi driver on a Phillips screw is usually a disaster.

-
-
Left to right: Phillips 0, Vic Cybertool 0, Pozi 0. The Cybertool bits are Phillips not pozi.
...and that was the last that was ever seen of it, because immediately after taking this photo I dropped it, it rolled under a cabinet, and disappeared into some alternate dimension!

Are you Pozi-tive it's gone?
-
@Archibald Tuttle said:
Left to right: Phillips 0, Vic Cybertool 0, Pozi 0. The Cybertool bits are Phillips not pozi.
...and that was the last that was ever seen of it, because immediately after taking this photo I dropped it, it rolled under a cabinet, and disappeared into some alternate dimension!

Are you Pozi-tive it's gone?
This calls for a closer Philinspection...
-
Question for the Cybertool owners in here. According to the SAKWiki the Cybertool comes with the following drivers:
[pre]Phillips (Pozidrive) 0 / 1
Slotted 4 mm / Phillips 2
Hex 4 mm / Torx #8
Torx #10 / #15[/pre]I am curious about the Pozidrive Phillips 0 / 1 bit. Does that work on regular Phillips 0 and 1 screws just as well as a normal Phillips driver would?
Left to right: Phillips 0, Vic Cybertool 0, Pozi 0. The Cybertool bits are Phillips not pozi. But like all Phillips drivers, with care they will generally work OK on a pozi screw. Better than the other way around - using a pozi driver on a Phillips screw is usually a disaster.
This is good too hear with my cybertool in the mail. Any idea why the wiki says the bit is posidrive? Perhaps it comes both ways depending on manufacture date and/or market?
-
@Archibald Tuttle said:
Left to right: Phillips 0, Vic Cybertool 0, Pozi 0. The Cybertool bits are Phillips not pozi.
...and that was the last that was ever seen of it, because immediately after taking this photo I dropped it, it rolled under a cabinet, and disappeared into some alternate dimension!

Are you Pozi-tive it's gone?
This calls for a closer Philinspection...
He's screwed.
-
@50ft-trad said:
@Archibald Tuttle said:
[quote author=shibafu link=topic=50953.msg1540191#msg1540191 date=1503142791]
Left to right: Phillips 0, Vic Cybertool 0, Pozi 0. The Cybertool bits are Phillips not pozi....and that was the last that was ever seen of it, because immediately after taking this photo I dropped it, it rolled under a cabinet, and disappeared into some alternate dimension!

Are you Pozi-tive it's gone?
This calls for a closer Philinspection...
He's screwed.
[/quote]Or nuts...? -
Left to right: Phillips 0, Vic Cybertool 0, Pozi 0. The Cybertool bits are Phillips not pozi.
...and that was the last that was ever seen of it, because immediately after taking this photo I dropped it, it rolled under a cabinet, and disappeared into some alternate dimension!

Between or under the floorboards? Inside the wall?
If not, it went where you didn't expect it to go. :ahhh -
@GoatDragon said:
This is good too hear with my cybertool in the mail. Any idea why the wiki says the bit is posidrive? Perhaps it comes both ways depending on manufacture date and/or market?They only come as Phillips' bits. The reference to Pozidriv is probably due to error or confusion.
-
@Little Tinker said:
@Little Tinker said:
They only come as Phillips' bits. The reference to Pozidriv is probably due to error or confusion.
Although while looking at the 2015 catalogue I see Victorinox themselves say "41. – bit Phillips 0 (Pozidrive)", etc ::)
Just found out...
My brand new CT41 has a double Philips bit.
My older CT34 (crossbow tang stamp) came with a double Pozidriv bit!! :ahhh
-
@GoatDragon said:
.My comment above this one might matter to you

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
