Are multitool saws resharpenable?
-
@pfrsantos said:
Glad to see you answer your own questions.:D :D


The question was not how to resharpen them, but rather can they be resharpened.
-
Well, the nitpicker in me says, if there's an answer to the question "how" that implies that the answer to "if" is "yes"...

Sent on my SM-G930F with Tapatalk
-
@50ft-trad said:
The Victorinox double acting saws are sharpenable with a small triangular diamond file. Care is needed, but if you get the file aligned correctly, passing the file down each tooth groove will sharpen both the push and pull cutting edges either side of the groove.The Leatherman pull cutting edges won't accept this file, as the groove is more acute than 60o, however a small half round (which usually has a larger radius than half the file width) may be able to sharpen them albeit only to a partial tooth depth.
I haven't checked the Gerber and SOG offerings, but I am confident I could sharpen both with my small diamond files.
Thanks for the info!

-
@50ft-trad said:
The Victorinox double acting saws are sharpenable with a small triangular diamond file. Care is needed, but if you get the file aligned correctly, passing the file down each tooth groove will sharpen both the push and pull cutting edges either side of the groove.
The Leatherman pull cutting edges won't accept this file, as the groove is more acute than 60o, however a small half round (which usually has a larger radius than half the file width) may be able to sharpen them albeit only to a partial tooth depth.
I haven't checked the Gerber and SOG offerings, but I am confident I could sharpen both with my small diamond files.
Thanks for the info!

Vicman,
It turned out that the 60o diamond file worked on the other saws too. They are just harder to align with the tooth form on the pull saws

-
Did you need to use a diamond file?
EDIT: Disregard - I just re-read an earlier answer of yours:
@50ft-trad said:
I don't have any standard tool steel jewellers files to check this with. I can't imagine the saws being treated too highly as nobody wants a saw with brittle teeth, but I don't know what hardness jewellers files are taken to either. As an aside, I think a lot of saw blades (and plier teeth) are laser treated to case harden them rather than a soak and quench type process.i don't know whether this translates to multitool components too, or just dedicated tools.Tl:dr = dunno

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login