Self Sufficient computer repair and maintenance
-
@raistlin65 said:
Yep. We all get to take performance hits on all of our computers once the patches come out (hopefully soon) :(If I can find the paper I was reading I'll post a link, but the gist of it was, the later the generation processor the lower the performance hit.
Add this too the WD My Cloud back door and it really hasn't been a good week
http://www.theregister.co.uk/2018/01/08/wd_mycloud_nas_backdoor/
-
I have a DNS320, but it's an older model without all the cloud stuff.
My brother in law has a mycloud though, I suppose I had better have a look at it asap. :facepalm:
-
@Whoey said:
http://gulftech.org/advisories/WDMyCloud Multiple Vulnerabilities/125I have a DNS320, but it's an older model without all the cloud stuff.
My brother in law has a mycloud though, I suppose I had better have a look at it asap.

Look on the plus side, at least you'll be able to check it remotely

-
actually no I can't.
the first thing I did was disable all the cloud based services as he is using it for work, and it cannot be accessed outside the LAN, which if I read correctly is the only semi safe state without an update.
-
@Whoey said:
actually no I can't.the first thing I did was disable all the cloud based services as he is using it for work, and it cannot be accessed outside the LAN, which if I read correctly is the only semi safe state without an update.
I thought you might have done, I forced an update on mine and I'll replace it this year with another raid 5 nas. It was part of my old backup routine and is nowhere near large enough any more.
-
I'm actually doubly glad I disabled that on the initial setup.
He had mentioned that some of his colleges in the field had setup remote access, and I suggested that if I were to set it up it is risky since due to privacy issues the data it contains should not be accessible and that to be sure we should not allow that even though it was a built in feature of the NAS.
-
I have a My Cloud EX4100, all cloud based features are dissabled.
I have to really try and figure out what is going on, and devote some time to ensuring I do not assume anything
-
@Whoey said:
I'm actually doubly glad I disabled that on the initial setup.He had mentioned that some of his colleges in the field had setup remote access, and I suggested that if I were to set it up it is risky since due to privacy issues the data it contains should not be accessible and that to be sure we should not allow that even though it was a built in feature of the NAS.
I also don't do remote access
-
I do not use remote ANYTHING into my network. actually, I have taken steps to make it more difficult to access my internal network (beyond the typical firewall, etc.
I have my public facing router, feed into another router. so instead of a Network Address Translation of public to private address which most people have, I have a Public to Private, then the private is treated as a public, and translated into a private again. the only traffic that can make its way in is any session that is initiated from inside. I know where there is a will there is a way, and Hackers will always find a way (I am a Certified Ethical Hacker, and Network Security professional).
this little dead network between the outside and the inside, with no inbound routing is a tricky little obstacle.
-
@detron said:
I do not use remote ANYTHING into my network. actually, I have taken steps to make it more difficult to access my internal network (beyond the typical firewall, etc.I have my public facing router, feed into another router. so instead of a Network Address Translation of public to private address which most people have, I have a Public to Private, then the private is treated as a public, and translated into a private again. the only traffic that can make its way in is any session that is initiated from inside. I know where there is a will there is a way, and Hackers will always find a way (I am a Certified Ethical Hacker, and Network Security professional).
this little dead network between the outside and the inside, with no inbound routing is a tricky little obstacle.
It's a sound solution

-
sounds like a good setup, obviously if someone is really determined to find a way in, they will eventually no matter what. I assume that for the most part they are going more for easy targets than the tough ones
-
@Whoey said:
sounds like a good setup, obviously if someone is really determined to find a way in, they will eventually no matter what. I assume that for the most part they are going more for easy targets than the tough onesI would have thought they'd go for large commercial targets first, maximum impact
-
@Whoey said:
sounds like a good setup, obviously if someone is really determined to find a way in, they will eventually no matter what. I assume that for the most part they are going more for easy targets than the tough onestotally agree, I do have a honeynet with its own wide open WiFi that is air-gaped from all other stuff. that is the easy target.
-
After win10's update today my computer won't boot up. Blue screen

I went to office depot to talk to a tech there and he said that he's got four computers in in the last hour with the same problem. He hasn't come up with a fix yet.
-
replied to the other thread... http://www.howto-connect.com/fix-inaccessible-boot-device-windows-10/ seems relevant towards fixing
-
@Whoey said:
replied to the other thread... http://www.howto-connect.com/fix-inaccessible-boot-device-windows-10/ seems relevant towards fixingThanks, I couldn't find that link

-
Well, I took the plunge and installed Linux on my laptop in a dual boot configuration with Windows.
My first experience with Linux, excluding some I-don’t-know-what-I’m-doing messing around with a Raspberry Pi.It took me long enough accomplish, I had to do a few BIOS configuration changes in order to get the Linux usb installer to stop crashing and recognise my SSD upon getting to the partition setup screen... and in addition, I had to make a 500 MB efi (still don’t quite understand what it is) partition for Grub (whatever that is, something boot related?) to install correctly.
Googling solutions when you don’t understand the terminology takes quite a bit of time. :D I wish I had remembered this thread.
I went with Linux Mint 19, because I heard it was noob-friendly, and Cinnamon because that’s the first option I encountered when searching for the download. ::)
I do have an unsolved problem. I’d like to devote more of my SSD space to the Linux /home partition, which is currently about 8GB, but windows won’t allow me to shrink the C: drive beyond a certain point, despite having dozens of gigabytes of free space on it?
Can anyone help? 
-
Dear Pabby,
I'd love to help... am, if you could just explain/clarify the following in red, I'll get my thinking cap on... and I'm sure I could nail something together for you...
Love n kisses,
Fuzzy*Well, I took the plunge and installed Linux on my laptop in a dual boot configuration with Windows.
My first experience with Linux, excluding some I-don’t-know-what-I’m-doing messing around with a Raspberry Pi.It took me long enough accomplish, I had to do a few BIOS configuration changes in order to get the Linux usb installer to stop crashing and recognise my SSD upon getting to the partition setup screen... and in addition, I had to make a 500 MB efi (still don’t quite understand what it is) partition for Grub (whatever that is, something boot related?) to install correctly.
Googling solutions when you don’t understand the terminology takes quite a bit of time. :D I wish I had remembered this thread.
I went with Linux Mint 19, because I heard it was noob-friendly, and Cinnamon because that’s the first option I encountered when searching for the download. ::)
I do have an unsolved problem. I’d like to devote more of my SSD space to the Linux /home partition, which is currently about 8GB, but windows won’t allow me to shrink the C: drive beyond a certain point, despite having dozens of gigabytes of free space on it?
Can anyone help?
*
-
@Don Pablo said:
Well, I took the plunge and installed Linux on my laptop in a dual boot configuration with Windows.
My first experience with Linux, excluding some I-don’t-know-what-I’m-doing messing around with a Raspberry Pi.It took me long enough accomplish, I had to do a few BIOS configuration changes in order to get the Linux usb installer to stop crashing and recognise my SSD upon getting to the partition setup screen... and in addition, I had to make a 500 MB efi (still don’t quite understand what it is) partition for Grub (whatever that is, something boot related?) to install correctly.
Googling solutions when you don’t understand the terminology takes quite a bit of time. :D I wish I had remembered this thread.
I went with Linux Mint 19, because I heard it was noob-friendly, and Cinnamon because that’s the first option I encountered when searching for the download. ::)
I do have an unsolved problem. I’d like to devote more of my SSD space to the Linux /home partition, which is currently about 8GB, but windows won’t allow me to shrink the C: drive beyond a certain point, despite having dozens of gigabytes of free space on it?
Can anyone help? 
Just a question, have you defragged the C: drive?
-
@Don Pablo said:
Well, I took the plunge and installed Linux on my laptop in a dual boot configuration with Windows.
My first experience with Linux, excluding some I-don’t-know-what-I’m-doing messing around with a Raspberry Pi.It took me long enough accomplish, I had to do a few BIOS configuration changes in order to get the Linux usb installer to stop crashing and recognise my SSD upon getting to the partition setup screen... and in addition, I had to make a 500 MB efi (still don’t quite understand what it is) partition for Grub (whatever that is, something boot related?) to install correctly.
Googling solutions when you don’t understand the terminology takes quite a bit of time. :D I wish I had remembered this thread.
I went with Linux Mint 19, because I heard it was noob-friendly, and Cinnamon because that’s the first option I encountered when searching for the download. ::)
I do have an unsolved problem. I’d like to devote more of my SSD space to the Linux /home partition, which is currently about 8GB, but windows won’t allow me to shrink the C: drive beyond a certain point, despite having dozens of gigabytes of free space on it?
Can anyone help? 
Just a question, have you defragged the C: drive?
Pabs in case you're wondering you use a file for that - but you can't do it on a Wednesday

(well I think i'm funny)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login