Self Sufficient computer repair and maintenance
-
@Whoey said:
I'm actually doubly glad I disabled that on the initial setup.He had mentioned that some of his colleges in the field had setup remote access, and I suggested that if I were to set it up it is risky since due to privacy issues the data it contains should not be accessible and that to be sure we should not allow that even though it was a built in feature of the NAS.
I also don't do remote access
-
I do not use remote ANYTHING into my network. actually, I have taken steps to make it more difficult to access my internal network (beyond the typical firewall, etc.
I have my public facing router, feed into another router. so instead of a Network Address Translation of public to private address which most people have, I have a Public to Private, then the private is treated as a public, and translated into a private again. the only traffic that can make its way in is any session that is initiated from inside. I know where there is a will there is a way, and Hackers will always find a way (I am a Certified Ethical Hacker, and Network Security professional).
this little dead network between the outside and the inside, with no inbound routing is a tricky little obstacle.
-
@detron said:
I do not use remote ANYTHING into my network. actually, I have taken steps to make it more difficult to access my internal network (beyond the typical firewall, etc.I have my public facing router, feed into another router. so instead of a Network Address Translation of public to private address which most people have, I have a Public to Private, then the private is treated as a public, and translated into a private again. the only traffic that can make its way in is any session that is initiated from inside. I know where there is a will there is a way, and Hackers will always find a way (I am a Certified Ethical Hacker, and Network Security professional).
this little dead network between the outside and the inside, with no inbound routing is a tricky little obstacle.
It's a sound solution

-
sounds like a good setup, obviously if someone is really determined to find a way in, they will eventually no matter what. I assume that for the most part they are going more for easy targets than the tough ones
-
@Whoey said:
sounds like a good setup, obviously if someone is really determined to find a way in, they will eventually no matter what. I assume that for the most part they are going more for easy targets than the tough onesI would have thought they'd go for large commercial targets first, maximum impact
-
@Whoey said:
sounds like a good setup, obviously if someone is really determined to find a way in, they will eventually no matter what. I assume that for the most part they are going more for easy targets than the tough onestotally agree, I do have a honeynet with its own wide open WiFi that is air-gaped from all other stuff. that is the easy target.
-
After win10's update today my computer won't boot up. Blue screen

I went to office depot to talk to a tech there and he said that he's got four computers in in the last hour with the same problem. He hasn't come up with a fix yet.
-
replied to the other thread... http://www.howto-connect.com/fix-inaccessible-boot-device-windows-10/ seems relevant towards fixing
-
@Whoey said:
replied to the other thread... http://www.howto-connect.com/fix-inaccessible-boot-device-windows-10/ seems relevant towards fixingThanks, I couldn't find that link

-
Well, I took the plunge and installed Linux on my laptop in a dual boot configuration with Windows.
My first experience with Linux, excluding some I-don’t-know-what-I’m-doing messing around with a Raspberry Pi.It took me long enough accomplish, I had to do a few BIOS configuration changes in order to get the Linux usb installer to stop crashing and recognise my SSD upon getting to the partition setup screen... and in addition, I had to make a 500 MB efi (still don’t quite understand what it is) partition for Grub (whatever that is, something boot related?) to install correctly.
Googling solutions when you don’t understand the terminology takes quite a bit of time. :D I wish I had remembered this thread.
I went with Linux Mint 19, because I heard it was noob-friendly, and Cinnamon because that’s the first option I encountered when searching for the download. ::)
I do have an unsolved problem. I’d like to devote more of my SSD space to the Linux /home partition, which is currently about 8GB, but windows won’t allow me to shrink the C: drive beyond a certain point, despite having dozens of gigabytes of free space on it?
Can anyone help? 
-
Dear Pabby,
I'd love to help... am, if you could just explain/clarify the following in red, I'll get my thinking cap on... and I'm sure I could nail something together for you...
Love n kisses,
Fuzzy*Well, I took the plunge and installed Linux on my laptop in a dual boot configuration with Windows.
My first experience with Linux, excluding some I-don’t-know-what-I’m-doing messing around with a Raspberry Pi.It took me long enough accomplish, I had to do a few BIOS configuration changes in order to get the Linux usb installer to stop crashing and recognise my SSD upon getting to the partition setup screen... and in addition, I had to make a 500 MB efi (still don’t quite understand what it is) partition for Grub (whatever that is, something boot related?) to install correctly.
Googling solutions when you don’t understand the terminology takes quite a bit of time. :D I wish I had remembered this thread.
I went with Linux Mint 19, because I heard it was noob-friendly, and Cinnamon because that’s the first option I encountered when searching for the download. ::)
I do have an unsolved problem. I’d like to devote more of my SSD space to the Linux /home partition, which is currently about 8GB, but windows won’t allow me to shrink the C: drive beyond a certain point, despite having dozens of gigabytes of free space on it?
Can anyone help?
*
-
@Don Pablo said:
Well, I took the plunge and installed Linux on my laptop in a dual boot configuration with Windows.
My first experience with Linux, excluding some I-don’t-know-what-I’m-doing messing around with a Raspberry Pi.It took me long enough accomplish, I had to do a few BIOS configuration changes in order to get the Linux usb installer to stop crashing and recognise my SSD upon getting to the partition setup screen... and in addition, I had to make a 500 MB efi (still don’t quite understand what it is) partition for Grub (whatever that is, something boot related?) to install correctly.
Googling solutions when you don’t understand the terminology takes quite a bit of time. :D I wish I had remembered this thread.
I went with Linux Mint 19, because I heard it was noob-friendly, and Cinnamon because that’s the first option I encountered when searching for the download. ::)
I do have an unsolved problem. I’d like to devote more of my SSD space to the Linux /home partition, which is currently about 8GB, but windows won’t allow me to shrink the C: drive beyond a certain point, despite having dozens of gigabytes of free space on it?
Can anyone help? 
Just a question, have you defragged the C: drive?
-
@Don Pablo said:
Well, I took the plunge and installed Linux on my laptop in a dual boot configuration with Windows.
My first experience with Linux, excluding some I-don’t-know-what-I’m-doing messing around with a Raspberry Pi.It took me long enough accomplish, I had to do a few BIOS configuration changes in order to get the Linux usb installer to stop crashing and recognise my SSD upon getting to the partition setup screen... and in addition, I had to make a 500 MB efi (still don’t quite understand what it is) partition for Grub (whatever that is, something boot related?) to install correctly.
Googling solutions when you don’t understand the terminology takes quite a bit of time. :D I wish I had remembered this thread.
I went with Linux Mint 19, because I heard it was noob-friendly, and Cinnamon because that’s the first option I encountered when searching for the download. ::)
I do have an unsolved problem. I’d like to devote more of my SSD space to the Linux /home partition, which is currently about 8GB, but windows won’t allow me to shrink the C: drive beyond a certain point, despite having dozens of gigabytes of free space on it?
Can anyone help? 
Just a question, have you defragged the C: drive?
Pabs in case you're wondering you use a file for that - but you can't do it on a Wednesday

(well I think i'm funny)
-
@AlephZero said:
Just a question, have you defragged the C: drive?Do SSD's need to be defragged?

In any case, I THINK I did. I might have done it wrong.
See the attached screenshot.

In the big window, is the Disk management tool.
Partitions 1 and 7 are a mystery to me.
Linux is on partitions 8 (efi), 9 (home), 10 (swap), and 11 (root).
D: is where the Laptop drivers are. It used to be 25 GB but I shrunk it to make space for linux.
C: is, well, C:.
LENOVO_PART and WINRE_DRV are also a mystery.The hidden lower-right window is the result of right clicking C: in the Disk Management tool and going to properties.
The left window called "Optimize drives" is from clicking Optimize in properties. The "defrag" button I used is the Optimize button in "Optimize drives".The lower middle window is from right clicking C: and going to Shrink. As you can see, although there is lots of free space on C:, I cannot shrink it farther.
-
@Don Pablo said:
Just a question, have you defragged the C: drive?
Do SSD's need to be defragged?

In any case, I THINK I did. I might have done it wrong.
See the attached screenshot.

In the big window, is the Disk management tool.
Partitions 1 and 7 are a mystery to me.
Linux is on partitions 8 (efi), 9 (home), 10 (swap), and 11 (root).
D: is where the Laptop drivers are. It used to be 25 GB but I shrunk it to make space for linux.
C: is, well, C:.
LENOVO_PART and WINRE_DRV are also a mystery.The hidden lower-right window is the result of right clicking C: in the Disk Management tool and going to properties.
The left window called "Optimize drives" is from clicking Optimize in properties. The "defrag" button I used is the Optimize button in "Optimize drives".The lower middle window is from right clicking C: and going to Shrink. As you can see, although there is lots of free space on C:, I cannot shrink it farther.
I think a few years back i hit a similar problem, if i remember correctly i used a linux partition manager to shrink the windows partition.
When you're in this kind of territory make sure you have everything backed up, it can go pearshaped real easy
-
I didn’t forget about you, Fuzzy! Since you asked so nicely:
My computer is not working as I want it to.
-
@eamo said:
I think a few years back i hit a similar problem, if i remember correctly i used a linux partition manager to shrink the windows partition.When you're in this kind of territory make sure you have everything backed up, it can go pearshaped real easy
Ok, I’ll try using a Linux program.

Regarding the backups, I have no data that I wouldn’t mind losing on my laptop, but I am worried about the possibility of reinstalling everything from windows to Linux from scratch again if I mess up something important. :ahhh
Any suggestions? -
@Don Pablo said:
I think a few years back i hit a similar problem, if i remember correctly i used a linux partition manager to shrink the windows partition.
When you're in this kind of territory make sure you have everything backed up, it can go pearshaped real easy
Ok, I’ll try using a Linux program.

Regarding the backups, I have no data that I wouldn’t mind losing on my laptop, but I am worried about the possibility of reinstalling everything from windows to Linux from scratch again if I mess up something important. :ahhh
Any suggestions?one easy solution is Parted Magic. it is a $10 purchase, but is a great tool to have on hand.
https://partedmagic.com/it is a bootable CD, focused on partition resizing and other administrative tasks. I carry this with me everywhere, (on a usb)
the nice thing about this type of solution, is no partitions are in use while you resize and reconfigure those partitions.Windows may complain after it boots the next time, and may want to scan the disk, but it is an easy one stop solution.
this disc also has backup solutions and virus scan solutions that may come in handy
-
No reason to pay for partition software. Gparted is a free open source partition program. Been around over a dozen years:
https://gparted.org/Create a live USB version to run it without being in your Windows or Linux boot: https://gparted.org/liveusb.php. The USB will have a mini version of Linux on it, just enough to support gparted. It won't be installing it to your hard drive. Just to the USB so it can boot from it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login