Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

Used Leatherman PST (Lynn's $10 MT Challenge)

Scheduled Pinned Locked Moved Cheap and Cheerful (or otherwise!)
24 Posts 1 Posters 3.5k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Lynn LeFeyL
    Lynn LeFeyL
    Lynn LeFey
    wrote on last edited by
    #4

    Drivers.

    Hey, kids! Do you like flathead screwdrivers? Well, have I got the multitool for YOU! 😄

    The PST has 4 screwdrivers, a phillips, and three flatheads. Brand new, these are very precisely formed. As received, there's just a small amount of marring on the edge of the largest flathead. I have seen a number of used PSTs, and I would say by far the most common damage I've seen to them is to the smallest flathead screwdriver tips, which are very frequently torqued or broken. on this example, the small flathead is in great shape.

    I was not going to cut the PST any breaks. From previous use, I knew it would handle a lot, so I went straight to hard use with the phillips, giving it a shot at a 3" wood screw in my back porch bench.

    There was SIGNIFICANT flex in the tool, maybe 15 degrees rotational flex, while trying to loosen this screw, but it did it, and sprang right back into shape when done. This is as close as I've been in this Challenge to really feeling like I might be pushing a tool beyond safe limits. The driver held very firmly in the screw, with no sense that it would cam out, and at no point did it feel like the non-locking tool would collapse on me. But to be fair, I was not exerting a huge amount of downward force.

    I gave it the usual round of testing on screws in my cabinets, but that was really just formality at that point.

    I gave the large flathead a shot at hinge screws, and prying open a paint can, and it did fine at both. Then I did a sort of torture test on it...

    That's a 15 degree or so flex while wedged between two 2x10s, and when released, it sprang right back into shape. There was no permanent deformation whatsoever.

    The metal of this tool shows pretty good resilience to taking some bend and returning to shape. This is a MAJOR difference from the previously tested Mossy Oak, a tool with a good design and metal that would take and keep a bend fairly easily.

    I have broken Leatherman tools before. They're not indestructible by any stretch of the imagination, but are pretty darn good.

    The small driver is JUST small enough to slot into eyeglass screws.

    The largest driver is a bit too large to slot into the screws in lightswitches and such, but the medium sized one works fine for this.

    Drivers: PASS
    Flathead for prying: PASS

    The tool is really only limited by the force you can apply to a non-locking tool. Newer versions of the PST redesigned the shape of the Phillips and medium flathead so their line of force would tend to push them toward the open side instead of the folding closed side, but this is the original shape, and these drivers can collapse on you. You, and your fingers, are warned.

    1 Reply Last reply
    0
    • Lynn LeFeyL
      Lynn LeFeyL
      Lynn LeFey
      wrote on last edited by
      #5

      Other functions

      The can opener/cap lifter

      Does it open cans?

      It sure does. This is about 1/3 of a small coffee can. I had to share opening duties with a couple other tools. The can opener works fine, but because of the width of the blade it has to push a lot more material out of the way than a Victorinox can opener. That requires a bit more force. I, personally, can work one of this style somewhat faster than a Vic's though. YMMV. There was no scraping on the inside of the can when I was done, so no metal splinters, although this can be an issue with this style of opener.

      And as a cap lifter...

      It works, although there's the chance of just punching through the top of the cap without pulling it off.

      The Awl. I gave it a go at the same trashcan I used in my Huntsman test. It is considerably better at punching through this kind of material, and leather, than the Victorinox awl.

      That's the GOOD news. The BAD is that while it's a good AWL, it's a terrible drill. I gave up after a few minutes of trying to get this thing to bore a hole in a half inch piece of ash, having made nothing more than a dent. Literally less than 1/16". It's good if you want to punch a hole in a tin can, or thin sheet material, or leather, or plastic, etc. Also, be warned, non locking awls can be iffy. I had no problem with this, but harder tests might show issues.

      The file.

      I put a nail in a vice, and used the metal saw on the side of the file to cut the nail head off.

      I then took the file and tried to put a 45 or so degree angle on the end.

      I was pretty impressed with the speed at which it accomplished both of these tasks. I took down most of the material on the nail with the cross cut side, then tried to smooth it out with the single cut side, and both worked really well. Any problems seemed more a matter of user than tool. 😄

      Can Opener/Cap Lifter: PASS
      Awl (AS an awl): PASS
      Awl (as a drill): FAIL
      File as metal saw: PASS
      File as metal file: PASS

      1 Reply Last reply
      0
      • Lynn LeFeyL
        Lynn LeFeyL
        Lynn LeFey
        wrote on last edited by
        #6

        So, closing thoughts.

        First, stepping away from it as a tool in hand, this thing is pretty much a piece of genius design. If you look at the use of space inside the tool, it is extremely well used. that lends to a high tool density for its space. The next thing is, this is amazingly simple in construction. The tool narrows at the pliers, so the pin holding them in is not stressed unnecessarily, a point I made against the Mossy Oak MT in this challenge.

        There are only two washers in this tool, flanking the file. I believe I know the intended function, but I think it actually works in two ways. I THINK that they're intended to allow a gap between the side of the handle and small flathead driver to keep the file from rubbing on those elements. However, it has a second, possibly unintended benefit, and i got to see it in this tool. It creates enough space for water to come out of the file. Since it's not as smooth as the other tools, it's more prone to rusting if the tool gets wet, and capillary action pulls water in or holds it in. However, in the specific case of this tool, I think what got into it was probably muddy water, and that held the water in place regardless.

        Setting aside those design issues, does the PST have any other feature that sets it apart? I'd say yes. It is the lightest and probably most pocketable full size multitool I've ever encountered.

        So it's fairly light, slim, with high tool density and pretty easy to maintain. What are the downsides?

        The plier ergonomics almost can't be overstated how bad they are. As a PLIER based tool, this is a BIG hit. Less of a hit, but the fact that the tools don't lock puts a real upper limit on what you can safely accomplish with this tool.

        So, is it worth $10

        :rofl:

        I watched ebay for a month. I feel certain that I could sell this tool in this condition for $30 easily, and it's EASILY worth that.

        This is an extremely strong contender for the best $10 MT.

        But there's one contender left to come.

        1 Reply Last reply
        0
        • FuzzbucketF
          FuzzbucketF
          Fuzzbucket
          wrote on last edited by
          #7

          Brilliant, excellent review Lynn! :salute:

          1 Reply Last reply
          0
          • Don PabloD
            Don PabloD
            Don Pablo
            wrote on last edited by
            #8

            Really cool to read! :like:

            1 Reply Last reply
            0
            • FuzzbucketF
              FuzzbucketF
              Fuzzbucket
              wrote on last edited by
              #9

              Lovely PST too - it cleaned up nicely! :tu:

              1 Reply Last reply
              0
              • MiniM
                MiniM
                Mini
                wrote on last edited by
                #10

                Very interesting! :like:

                1 Reply Last reply
                0
                • Lynn LeFeyL
                  Lynn LeFeyL
                  Lynn LeFey
                  wrote on last edited by
                  #11

                  Thanks, all. :salute:

                  @Fuzzbucket said:
                  Lovely PST too - it cleaned up nicely! :tu:

                  Yeah. I was honestly amazed at the transformation. I think it helped my view of this tool immensely that nothing was actually broken or damaged. Just rusty.

                  1 Reply Last reply
                  0
                  • ironravenI
                    ironravenI
                    ironraven
                    wrote on last edited by
                    #12

                    OK, I usually find them for $15 when I rescue them from the TSA- great find, and that guy is an idiot smurf.

                    So, what's next? Or are we just going to call it a three way tie for the two Vics and the PST and everyone else starts at 4th place?

                    1 Reply Last reply
                    0
                    • YaddaY
                      YaddaY
                      Yadda
                      wrote on last edited by
                      #13

                      I've got a beat up PST coming. Cost was $8.51. I think it is missing the file. This review makes me more excited to get it in hand.

                      1 Reply Last reply
                      0
                      • Lynn LeFeyL
                        Lynn LeFeyL
                        Lynn LeFey
                        wrote on last edited by
                        #14

                        @Yadda said:
                        I've got a beat up PST coming. Cost was $8.51. I think it is missing the file. This review makes me more excited to get it in hand.

                        Awesome! I think you'll like it, even with a missing file. Someone here might have a spare, too, and they're not hard to fix. As I showed above, two pairs of pliers and the tool's apart. And it's not hard to reassemble, unlike some tools I've messed with.

                        1 Reply Last reply
                        0
                        • Lynn LeFeyL
                          Lynn LeFeyL
                          Lynn LeFey
                          wrote on last edited by
                          #15

                          @ironraven said:
                          So, what's next? Or are we just going to call it a three way tie for the two Vics and the PST and everyone else starts at 4th place?

                          Well, YOU were going to call it after the Vics, so...

                          Yeah, still a strong contender to come. Not sure if it'll be the winner, but it's good.

                          1 Reply Last reply
                          0
                          • YaddaY
                            YaddaY
                            Yadda
                            wrote on last edited by
                            #16

                            @Lynn LeFey said:

                            @Yadda said:

                            I've got a beat up PST coming. Cost was $8.51. I think it is missing the file. This review makes me more excited to get it in hand.

                            Awesome! I think you'll like it, even with a missing file. Someone here might have a spare, too, and they're not hard to fix. As I showed above, two pairs of pliers and the tool's apart. And it's not hard to reassemble, unlike some tools I've messed with.

                            :tu:

                            1 Reply Last reply
                            0
                            • SteveCS
                              SteveCS
                              SteveC
                              Global Moderators
                              wrote on last edited by
                              #17

                              It's the only Multitool I carried for over 20 years and it served me well :tu:

                              1 Reply Last reply
                              0
                              • Lynn LeFeyL
                                Lynn LeFeyL
                                Lynn LeFey
                                wrote on last edited by
                                #18

                                @SteveC said:
                                It's the only Multitool I carried for over 20 years and it served me well :tu:

                                Care to give some thoughts on long-term use? How does the blade work for day to day stuff, or did you carry a separate blade? How did you find the ergo of the plier handles? How does the file hold up over time? Do you pocket or belt carry? Etc. I'm very interested to get the perspective from someone who's lived with it that long.

                                1 Reply Last reply
                                0
                                • ReamerPunchR
                                  ReamerPunchR
                                  ReamerPunch
                                  Global Moderators
                                  wrote on last edited by
                                  #19

                                  Quite a story indeed, and great job with bringing it back to life. :cheers:

                                  Very appropriate to test a PST now, too. :like:

                                  1 Reply Last reply
                                  0
                                  • ThePeacentT
                                    ThePeacentT
                                    ThePeacent
                                    wrote on last edited by
                                    #20

                                    my OG ST came in similar condition, also cleaned up fine, :salute:

                                    these tools used are a bargain most times, they come back to business in a breeze with some TLC. Also, this tool you tested was 21 years old, how many Ozark Trails, Les Stroud or Mossy Oak would work as good after two decades...I bet few of them :whistle:

                                    good tests and review Lynn, you always bring much fun and entertainment to this forum :tu:

                                    1 Reply Last reply
                                    0
                                    • Lynn LeFeyL
                                      Lynn LeFeyL
                                      Lynn LeFey
                                      wrote on last edited by
                                      #21

                                      @ReamerPunch said:
                                      Very appropriate to test a PST now, too. :like:

                                      With the collector's edition one released, and a general thought of "how much would YOU pay for a PST", I had to bite my tongue while thinking "I guess at least $8". :rofl:

                                      @ThePeacent said:
                                      these tools used are a bargain most times, they come back to business in a breeze with some TLC. Also, this tool you tested was 21 years old, how many Ozark Trails, Les Stroud or Mossy Oak would work as good after two decades...I bet few of them :whistle:

                                      While this is very true, it's also true that the tool as purchased was almost unusable. It's not just a question of how long they last. It's a question of whether or not you have the time and interest in doing the restoration work. If I had worked a minimum wage job for the amount of time I worked to fix this thing, I could have bought a new Rebar. Okay, maybe a gently used Rebar. 😄

                                      1 Reply Last reply
                                      0
                                      • ThePeacentT
                                        ThePeacentT
                                        ThePeacent
                                        wrote on last edited by
                                        #22

                                        @Lynn LeFey said:

                                        @ReamerPunch said:
                                        Very appropriate to test a PST now, too. :like:

                                        While this is very true, it's also true that the tool as purchased was almost unusable. It's not just a question of how long they last. It's a question of whether or not you have the time and interest in doing the restoration work. If I had worked a minimum wage job for the amount of time I worked to fix this thing, I could have bought a new Rebar. Okay, maybe a gently used Rebar. 😄

                                        fair enough.
                                        That's why when the tools you tested drew blood in this challenge and I read about how you spent "30 mins" 😮 sharpening a blade or nearly and hour between those two SAK's badly ground and sharpened edges, I thought to myself that not even I spend that much time on edges,* especially if they're from cheap knives*. :ahhh

                                        If they're so damaged or bad, I put them through the Dremel 😄 and forget about "surgical precision sharpening"

                                        1 Reply Last reply
                                        0
                                        • Lynn LeFeyL
                                          Lynn LeFeyL
                                          Lynn LeFey
                                          wrote on last edited by
                                          #23

                                          @ThePeacent said:
                                          That's why when the tools you tested drew blood in this challenge and I read about how you spent "30 mins" 😮 sharpening a blade or nearly and hour between those two SAK's badly ground and sharpened edges, I thought to myself that not even I spend that much time on edges,* especially if they're from cheap knives*. :ahhh

                                          If they're so damaged or bad, I put them through the Dremel 😄 and forget about "surgical precision sharpening"

                                          The time I spent is for two reasons. Until a few days ago, I didn't have a good way to sharpen a blade very quickly, with any degree or precision. So it was a slow process. Second, I don't want my results of 'this blade sucks' to be because I did a half-smurfed job.

                                          However, I have a new sharpener that should speed things up for future testing.

                                          1 Reply Last reply
                                          0

                                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                          With your input, this post could be even better 💗

                                          Register Login

                                          • Login

                                          • Don't have an account? Register

                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Popular
                                          • World