Shootout- Leatherman Skeletool vs SOG Reactor
-
@OldBoy2016 said:
Rooting for the Skeletool.I'm also rooting for the Skele. I'm pretty sure it would make my ideal EDC, but its damn hard to find a seller with decent shipping when I have the money for it (never found)...
-
Part 3- Pliers

After the blade the most prominent function is the pliers, and let’s face it, this one seems like an open and shut case (pun sadly intended) given SOG’s compound leverage. Just for the fun of it though, let’s break it down and see what we really have.

The heads themselves are very similar, with the Reactor’s being slightly stouter than the slender Skeletool’s more pointed needlenose. In fact, the Skeletool has slightly more reach than the Reactor.

As you can see from the photos, it’s pretty minor and I don’t see it being point-worthy so let’s dig a little deeper and notice that the SOG head has more surface area on the cutters. Good cutters are important when you have SOG’s Compound Leverage driving those teeth together, so again it seems like SOG has this one.
But, there’s a twist- SOG’s Compound Leverage isn’t without it’s drawbacks too. For example, while the SOG plier head may open further than the Skeletool’s, the handles have to be much farther apart to allow it, and they are basically nonfunctional in that configuration.
Compact tools such as these are also favored by people with smaller hands and having handles that open too wide limits their usefulness significantly.

This having been said, the Compound Leverage does allow you to use it with the plier handles folded over the head as well as opposite the head in a normal plier position, and that has come in handy on some jobs where clearance was an issue.
Additionally, my father is somewhat past his prime and he loves his SOG pliers because the compound leverage offsets the arthritis in his hands very well, and that alone deserves a point. I could keep poking at this, but in the end we all know this point is going to the Reactor, so let’s just cut to the chase.
SCORE- SOG 3, Leatherman 1
Def
-
Very interesting

To me they are both very handy looking pliers
But I do like the SOG compound leverage idea
-
I never handled a SOG, but this looks great to me.

-
How durable are the SOG pliers?
Those little gears are ingenious....but they seem....frail?
Maybe I'm just too rough on my stuff. :-[
-
Great review!

I like the compound leverage of Reactor but the assisted opening is a con very big to me.
Could it be possible to disassist the SOG Reactor??
Thanks Mr Lamontagne ;)
-
How far can the Reactor jaws open one-handed?

-
@Nix said:
How durable are the SOG pliers?Those little gears are ingenious....but they seem....frail?
Maybe I'm just too rough on my stuff. :-[
The gears do less than you might think. The mechanical advantage, or multiplication of the gripping force, is created by having the handle pivot forwards of the plier pivots. All the gears do, is keep the centreline of the plier head in line with the centre line of the handles. If you were gripping something to pull along the tool axis, or using the cutters for example, the gears aren't subject to much force at all. They do come into play however, when turning a nut, or doing anything which may twist the pliers centreline away from the handle centreline. Even then, I do not believe the gears are taking the full torsional load. This is a different torsional load from the twisting of the screwdriver bit in the back of the plier head - different axis of rotation...
It's not a particularly easy concept to put across in words only, but I hope this helps to get a clearer understanding of what those gears are for. I do not believe they are quite the weak link that they might initially appear to be.
@Syncop8r said:
How far can the Reactor jaws open one-handed?
Good question.
-
Thanks, 50ft. Good explanation of an abstract concept.
I've pre-ordered the SOG PowerAccess Deluxe through the MTo store. I guess I'll get a chance to see!

-
The compound pliers for the SOG tool is one of the few things I really like about SOG multi-tools. I just wish they did not feel so flimsy in the handles compared to Leatherman.
Does SOG have IP on their geared compound pliers? Seems compound pliers in general have been around long before SOG. It would be cool to see Leatherman make a compound pliers tool. A Surge with a compound pliers would be a beast!
-
I'm liking the shootout. I wasn't the biggest fan of the Skeletool till just recently. I tried to carry it in the past but we didn't quite hit it off. Having made an effort I have had a change a mind. While it has a basic set of tools its a functional set. I've not handled the Reactor so this is really a good read.
-
So far I am liking the SOG

Never had one yet so i will be
Interested to see how it performs
-
While I really like the idea of these "shootouts" between two similar tools of different brands, I have to say - and maybe this is just me here - the price to feature ratio on both of these tools is abysmal.
I may follow this thread for the heck of it and for Grant' s sense of humor, but $60-$70 MSRP for a device with so few tool components drives me up a friggin' wall.
A new Wingman or a used 1st gen Wave cost less and does so much more. Hell, a new Rebar does WAY more at the lower price. I'm not as well versed in SOG' s line-up, but I bet they have a new something or other that's cheaper but has a more dense tool load out as well.
If they are going to give me half the tool load of a Rebar, it ought to cost about half as much. Not some overwrought, gussied-up, fancy schmancy designed scales just to puff up the price of a (maybe) $40 tool. My PS4 has more features.
**end rant. Thanks for your patience.
-
@mcb said:
Does SOG have IP on their geared compound pliers? Seems compound pliers in general have been around long before SOG. It would be cool to see Leatherman make a compound pliers tool. A Surge with a compound pliers would be a beast!There are many ways to make compound pliers. SOGs geared version is one of the compact sized ones though, and hence well suited for multitools.
The flip side is the doubled handle movement which makes the effective grip range of the plier (at least one handed) half of normal pliers. And I've noticed those tiny gears tend to poke me a bit if I just put it in my pocket. (I don't have the reactor though - just two of the others).
-
Great review!

I like the compound leverage of Reactor but the assisted opening is a con very big to me.
Could it be possible to disassist the SOG Reactor??
Thanks Mr Lamontagne ;)
Helloooooooo!
Removing the spring (or at least attempting to) is my next project. >:D
Def
-
@Grant Lamontagne said:
Great review!

I like the compound leverage of Reactor but the assisted opening is a con very big to me.
Could it be possible to disassist the SOG Reactor??
Thanks Mr Lamontagne ;)
Helloooooooo!
Removing the spring (or at least attempting to) is my next project. >:D
Def
Coooool!!! :D
-
Part 4- Screwdrivers
To me the screwdrivers are probably the most used part of a multitool, or at least are tied with the blade for most used, and therefore they deserve special attention. Of course, as screwdrivers are part of the scope of this comparison, I imagine we were going to take a close look anyway….

Neither of these tools has on board, folding drivers as many tools do, and they both rely on replaceable bit drivers. That’s about where the similarity ends, as they are very different setups.
The Reactor has a strange way of going about it- the double ended standard ¼” (6mm) hex bit spends most of it’s time in the end of the smaller of the two plier handles, however is not meant to be used from that position. To use it, you have to pull the screwdriver bit out then insert it in the backside of the head of the Reactor when the handles are folded into the closed position. This allows the Compound Leverage to grip the bit twice as hard as your hand is gripping it and allows you to put a lot of pressure on extremely stubborn screws.
Of course, the draw back is that if you release the pressure on the handles the bit then becomes loose and potentially rotates, so you have to develop a bit of a technique to use it.

On the other hand, the Skeletool simply needs to be folded out as one double ended bit rides in the bit driver, and, assuming that is the bit you need, no further action is required. And, the Skeletool has a second double ended bit riding along which means it has double the screwdriver options as the Reactor. This would be a definite win for the Skeletool, except that it isn’t quite perfect either.
First and most obviously, the Skeletool uses Leatherman’s flattened bits, which I personally cannot stand. These bits are fine as long as you have the proper bit loaded on board, but if you don’t, you can’t just grab a bit out of a toolbox or at a local shop. There is a standard bit size for a reason, and Leatherman chose to ignore that standard. The Reactor, as with all bit driver equipped SOG models, accepts standard bits.

The second issue with the Skeletool bit driver is seen in all the photos so far, although you may not have noticed it- I have a different, non standard issue set of bits in mine because at some point the double Phillips bit has fallen out of it and gotten lost. With the open end of the Skeletool there is nothing to retain bits in it, and they go missing quite easily, which seriously negates the advantage of having multiples.
Further, if you should leave a flathead bit in the driver end then it sticks out just enough when folded to draw blood from any unsuspecting bit of flesh that it comes in contact with- such as when you reach into the pocket it is clipped in to get some change or your keys.

And then there is the form of the tool- in order to use the screwdriver the handles have to be folded out, either at a 90 or 180 degree orientation to the rest of the tool. This seems like it would be great to apply extra torque to a screw or get extra reach, but given the excess flex that results when tackling a resistive screw, I worry about permanently warping the Skeletool under hard use.
By comparison the Reactor can be used as hard as you want- the harder you grip it the harder you can use it. While it may be a bit more inconvenient, overall I have to give this point to the Reactor. Still, the Skeletool does have twice as many screwdriver functions as the Reactor, and that can’t be ignored. I’ll score this one as a tie and award a point to both.
SCORE- SOG 4, Leatherman 2
After 4 events the SOG Reactor isn't looking like such a bad tool after all, is it?

My personal preference on this one is the SOG because of the versatility of being able to use standard bits, which could come in handy for different types of screws or ones that are recessed, while you just kind of get what you get with the Skeletool. I really hate those flat bits.

But, fair is fair, and the Skeletool does have twice as many screwdriver bits on board as the Reactor, and Leatherman deserves recognition for that.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login







