Shootout- Leatherman Skeletool vs SOG Reactor
-
@Kampfer said:
Skeletool is Cyberdyne Systems Model 101 Series 800's standard issue breaching tool.
No way the reactor is that cool, matter of fact the Reactor isn't even reacting anymore only after two short years of production. It might sounds great and beats Skeletool on paper, but five minutes in hand I call it quit. The tool just feel cheap in hands, very weak liner lock, uncounterable amount of hotspots in knife, pliers and driver mode.
can't argue with a Skeletool-wieding T800. :ahhh
Skele wins hands down
-
The bit holder on my CX "locks" the bit in place. I have to press the lock to insert and remove bits. While I can agree standard bits would have been a complete win for LM I don't dislike the flat bits. I have never had one not perform for me. I stow the Philips bit in mine and there is no protrusion which could cause any cut or pinch. I also checked with the include flat blade bit. My flat blade bit doesn't protrude like the one pictured. I do like the bit storage which like mentioned gives 2 more options. While I haven't pushed my Skeleltools bit holder I have with my Wave and so far so good. I'm not sure having to "learn" a technique to use a driver is for me. While small I just want to turn a screw and be done. The great potential is the SOG appearing to totally win at turning stubborn screws. I like not pausing thinking to myself ( will the bit holder withstand this ). I've not actually had that happen but still.
-
Part 5- Bottle Opener
I don’t even know if there is a comparison needed here- this one is as open and shut as it can possibly get, and the Skeletool absolutely kills the Reactor on this one. But, since I am dragging this out into a serial, let’s get into why.

First off, there is no prep needed for the Skeletool. If you have it in your hand, chances are it is ready to cleanly snap the top off a bottle. The carabiner end is not only an excellent and effective bottle opener, it is also a carabiner and lanyard hole, adding extra function to the bottle opener.

By comparison the bottle opener on the Reactor is quite lacking, being a small fold out hook that seems like it was thrown in as an afterthought. It also features a lanyard ring but suffers from being very difficult to pull out when needed. Maybe some out there are looser than mine, but I can’t comment on things I have not experienced myself. And, being one small point of contact on a cap means it won’t lift nearly as smoothly as the Skeletool’s bottle opener would.
But, this is Multitool.org and we are famous for finding the good and bad in everything, except of course Schrade, which is absolute monkey crap through and through. In light of that (the finding good thing, not the Schrade thing) here is the one way in which the SOG Reactor bottle opener is better than the Skeletool’s:
It is compact.

As we have seen from the Freestyle the Skeletool is a perfectly functional tool with a carabiner stuck on the end making it quite large for what is supposed to be a compact tool. In fact, we awarded a point in Part 1 to SOG for just that reason. While the Reactor’s bottle opener may not be as effective as the Skeleool’s, it is at least a heck of a lot smaller and doesn’t impact the use of the rest of the tool in any way.
But, that’s not enough to take this point away from Leatherman, and the Skeletool moves up another notch.
SCORE- SOG 4, Leatherman 3
Def
-
I still worry about the flat bit holder it's on a small size pivot screw
So I can't see it lasting long on heavy duty screws ( stubborn screws)
Something is going to give at some point

-
Thanks Def for "testing" the bottle opener.
It seems more important on this side of the pond (no screw caps here)
But does the SOG one work ok?
-
@MTMatt said:
Thanks Def for "testing" the bottle opener.
It seems more important on this side of the pond (no screw caps here)
But does the SOG one work ok?
If you are opening a few beverages at a time it is more than adequate. If you are a professional bartender in a fancy disco and open hundreds of bottles every hour then I suggest getting a better bottle opener than either the Skeletool or the Reactor. :P
The Skeletool pulls the cap off the bottle first time, every time. The Reactor may get first pull every time with some practice, but I'd say at least half the time you will need to do two lifts per cap. The Reactor is functional enough, but not even close to ideal, but I suppose that could be said about just about any function on just about any multitool.
Def
-
@Wspeed said:
I still worry about the flat bit holder it's on a small size pivot screw
So I can't see it lasting long on heavy duty screws ( stubborn screws)
Something is going to give at some point

I have been using my Skeletool for many years now. I have worn out two going on three #2 Philips bits getting after some stubborn and stuck screws with it over the years and my pliers joints are still very tight. It may look delicate but the hinge joint at the pliers have proven to be very robust in my experience. YMMV
-
I still worry about the flat bit holder it's on a small size pivot screw
So I can't see it lasting long on heavy duty screws ( stubborn screws)
Something is going to give at some point

I have been using my Skeletool for many years now. I have worn out two going on three #2 Philips bits getting after some stubborn and stuck screws with it over the years and my pliers joints are still very tight. It may look delicate but the hinge joint at the pliers have proven to be very robust in my experience. YMMV
That's great mcb

That sounds good makes me more at ease
-
@Grant Lamontagne said:
@MTMatt said:
Thanks Def for "testing" the bottle opener.
It seems more important on this side of the pond (no screw caps here)
But does the SOG one work ok?
If you are opening a few beverages at a time it is more than adequate. If you are a professional bartender in a fancy disco and open hundreds of bottles every hour then I suggest getting a better bottle opener than either the Skeletool or the Reactor. :P
The Skeletool pulls the cap off the bottle first time, every time. The Reactor may get first pull every time with some practice, but I'd say at least half the time you will need to do two lifts per cap. The Reactor is functional enough, but not even close to ideal, but I suppose that could be said about just about any function on just about any multitool.
Def
Thanks Grant for your feedback

-
as a side note,
I think the Skele should get some points for having a second carry method via carabiner, as I've hung it from the belt loops more than once in some less than ideal situations. Alo applicable to MOLLEs, backpacks and other packs/bags

But the Reactor should also have some reward for having a blade without holes in it. I've had stuff getting inside my Skele's holes more than once, resulting in gunk and evn rust (yeah I forgot to see the dirt and wash it out of the hole for some time) when delaying the cleaning.

Also, the Skele's holes and alien looking curves allow for much pocket lint and dust to fill those voids, I don't know how the Reactor's construction would fare with that
-
Funny you should mention Carry Methods, as that is the subject of Part 6 of this series, and the second last installment!
Part 6- Carry Methods

Another big strength of the Skeleool is its versatility in carry- it can be clipped onto a pack or other equipment or clipped to a pocket using the pocket clip. Conversely the Reactor can really only be carried clipped to a pocket

Comparing pocket clip to pocket clip to keep them on an even playing field, the Skeletool pocket clip is longer than the one on the Reactor, and generally that translates to a more secure hold in the pocket. However, the Reactor pocket clip allows the Reactor to ride much lower in your pocket, and the fact that it is shorter is offset by the fact that the tool itself is shorter.

Instead on this one I think I am going to call it a draw, as the clip is far better on the Reactor than the one on the Skeletool, but the Skeletool offers us twice as many carry options, both of which are highly effective.

Like I did with the screwdrivers, I think I am going to have to rule this one a tie, not because they are the same, but because the Reactor is superior, but the range of options provided by the Skeletool is undeniable.
SCORE- SOG 5, Leatherman 4
There's one event left and so far SOG has maintained the lead! Will they keep it? Will Leatherman tie it up? Only one way to find out! Tune in tomorrow for the finale- same multitool time, same multitool channel! :D
Def
-
Nice write up look forward to tomorrow

-
Not that I would buy one of these...

-
Waiting for the last post! :)

-
Sorry, I got distracted by some other stuff... more on that later.... >:D
I will get the last part posted shortly.

Def
-
Part 7- Overall Fit and Finish
This one is also immediately apparent as soon as you handle each one- The Leatherman Skeletool just feels nicer in the hand, and each of it’s functions is crisp and locks into place. There’s nothing wrong with the SOG per se, it just doesn’t seem to feel as solid.

When you fold the Skeletool blade out you feel a healthy bit of resistance- it’s smooth, but you know it’s not going to fall out accidentally, and then when the liner lock snaps into place it feels like a bank vault door closing. The relatively deep click you heard when it does fills you with confidence that this tool is going to be as strong as you need it and won’t give in easily.
By comparison, although the blade setup is much different, the Reactor’s blade flings open like a kid tossing his backpack on the couch when coming in the house after school, and the liner lock is more of a pop than a click. Not a bad thing in its own right, but it just doesn’t give you that confident feeling that you get from the Skeletool.

Going a bit further, at some points it seems like someone spent more time crafting the Skeletool, with it’s sweeping lines and many interlocking parts, while the Reactor feels like someone was just trying to put the most used functions together to get something made. There’s nothing wrong with that mentality, and in fact I prefer a feature rich and functional tool over one that sacrifices function for the sake of looks, but the Skeletool hasn’t really sacrificed much for the way it looks.
The screwdrivers are a great example of this- the way the screwdriver end folds neatly inside the split end of the carabiner (unless you are using the flat bit!) and the spare bit tucks neatly into an otherwise unused spot on the frame, while the bit on the Reactor just sort of fits into a spare end because it can’t stay in the bit driver when not in use. The attention to detail shows that the Skeletool designer Glenn Klecker really put some effort into it.
In my opinion, the Skeletool design does qualify as art, because Leatherman continues to use that concept with the MUT, Signal and other tools, and yet they just don’t have the same appeal as the Skeletool, kind of like if someone stuck a bag of Ruffles in the hands of the Mona Lisa.
What all this means is that Leatherman has gotten this last point, and once again a shootout has resulted in a tie. It’s a bit of a shock to me as well, as once again my personal bias has been well established, but in the end each one has its strengths and weaknesses, and, as with any multitool, has its compromises. In the end though I have to say that I just don’t think you can go wrong with either of these tools. Yes, the Skeletool is higher quality, but the Reactor has massive pliers, well able to tackle big jobs despite being in a smaller package.And, there’s a twist….
In an ultra secret memo that I may be “sanctioned” for spilling, SOG has recognized the quality issues that have been plaguing them lately and have informed me that they are making an increase in quality a huge priority. This is great news for any SOG enthusiast, and I am looking forward to seeing what the result is. Maybe I’ll revisit this in a year or so, with a new Skeletool and a new Reactor and find out for ourselves!
Congratulations to both tools, and both companies- you have both made a fine tool, and, in the end, isn’t that really what everyone here wants, regardless of where it came from?
FINAL SCORE- Leatherman 5, SOG 5
TIE TIE TIE TIE TIE TIE TIE TIE TIE TIE TIE TIE :ahhh :ahhh :ahhh
Def
-
Great review!

The downside is that it just made me want the Skele even more, haha. -
That was a great write up
Hope we get some more soon

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




