PowerPint Overview Mighty Little MT
-
Try cutter with your left hand. This is a pair of left handed scissor like I said before earlier.
I, am, serious.
Btw, the design of the scissors are off. The handles are too short to give it any kind of proper leverage.
-
@Sam Lim said:
Try cutter with your left hand. This is a pair of left handed scissor like I said before earlier.I, am, serious.
Btw, the design of the scissors are off. The handles are too short to give it any kind of proper leverage.
Well, I did just that, but saw no difference, it just chewed on the cardboard, it's too much for it. And let me add that I'm ambidexterous, or mixed handed to be precise, so my left is pretty much the same in strength and dexterity as my right, so that variable can be ruled out. For the sake of the experiment, I tried it with my right hand upside down, with the moving arm facing downwards to my pointer finger, but no difference either.
Maybe you scissors are better made, or your hand/fingers are stronger.
-
Yes they are left handed

You can see it properly in the pic of Sam
Nice one Sam never noticed that before

-
@Sam Lim said:
Try cutter with your left hand. This is a pair of left handed scissor like I said before earlier.
I, am, serious.
Btw, the design of the scissors are off. The handles are too short to give it any kind of proper leverage.
Well, I did just that, but saw no difference, it just chewed on the cardboard, it's too much for it. And let me add that I'm ambidexterous, or mixed handed to be precise, so my left is pretty much the same in strength and dexterity as my right, so that variable can be ruled out. For the sake of the experiment, I tried it with my right hand upside down, with the moving arm facing downwards to my pointer finger, but no difference either.
Maybe you scissors are better made, or your hand/fingers are stronger.
Without any disrespect, I am serious. Its not my hands are better or anything like that. It's really a left handed scissors. There are scissors specifically made for left handers. And this is one of them. I am not sure why Sog made this decision. The past scissors designs from the powerlock series are right handed.
Well, the scissors from sog had never been great for the record. So.. I am not too surprise that it didn't make the cut this time round.. Mine is terrible as well.
-
@Sam Lim said:
@Sam Lim said:
Try cutter with your left hand. This is a pair of left handed scissor like I said before earlier.
I, am, serious.
Btw, the design of the scissors are off. The handles are too short to give it any kind of proper leverage.
Well, I did just that, but saw no difference, it just chewed on the cardboard, it's too much for it. And let me add that I'm ambidexterous, or mixed handed to be precise, so my left is pretty much the same in strength and dexterity as my right, so that variable can be ruled out. For the sake of the experiment, I tried it with my right hand upside down, with the moving arm facing downwards to my pointer finger, but no difference either.
Maybe you scissors are better made, or your hand/fingers are stronger.
Without any disrespect, I am serious. Its not my hands are better or anything like that. It's really a left handed scissors. There are scissors specifically made for left handers. And this is one of them. I am not sure why Sog made this decision. The past scissors designs from the powerlock series are right handed.
Well, the scissors from sog had never been great for the record. So.. I am not too surprise that it didn't make the cut this time round.. Mine is terrible as well.
Well, I didn't think you're pulling my leg. :) And I see what you mean with it being left handed, the arms are arranged opposite as on other scissors, I just meant for me it didn't make any difference when trying it left handed. Take thick blades, short lever arms and a too strong spring and you have your PowerPint scissors. :)
-
On mine they look like this. There are machining marks, and can be felt when opening, definitely not buttery smooth, but wouldn't call it rough either.
Thank you for the input, Exeter!
@Exeter said:
Also, future owners be aware that the scissors on the PowerPint, although require quite some force to operate, are only good for threads, a couple of layers of normal printer/newspaper, thin zipties, thin regular cardboard. I tried it on corrugated cardboard and it failed miserably. See on the photo: the abandoned cut was made with the PP, the rest for comparison with the same piece of cardboard.EDIT: Based on the size of the scissors, maybe a Squirt PS4 would be better for comparison, but I wouldn't dare to have a go at cardboard like this with that, so looking at like that, it's a win for the PP. :)
The scissors were not a disappointment on the Pint for me either after all, after using them on a bunch of stuff. Card stock was the thickest material I successfully cut with mine. Corrugated cardboard is tough on little scissors. :ahhh
@Sam Lim said:
Try cutter with your left hand. This is a pair of left handed scissor like I said before earlier.I, am, serious.
Btw, the design of the scissors are off. The handles are too short to give it any kind of proper leverage.
Well, seeing as the Pint uses the compound leverage pliersand has a tool locking mechanism, that is likely the best handle to cutting end ratio they could have achieved. The spring is stiff, but could possible be removed and over extended to remove some tension. More work to fix another new SOG issue. Though, I should note, the scissors on mine are acceptable in regards to spring tension. Not butter soft like a LM Juice or 91mm SAK, but not as bad as a lot of scissors I've used on cheaper MTs.
I found little difference in using ambidextrously as well, although I concede the point they wouldbe easier to use for a lefty to some degree.
In essence, barring the silly file, the tools were actually better than I had expected considering the tool's nature. IMO of course.
-
@Sam Lim said:
@Sam Lim said:
Try cutter with your left hand. This is a pair of left handed scissor like I said before earlier.
I, am, serious.
Btw, the design of the scissors are off. The handles are too short to give it any kind of proper leverage.
Well, I did just that, but saw no difference, it just chewed on the cardboard, it's too much for it. And let me add that I'm ambidexterous, or mixed handed to be precise, so my left is pretty much the same in strength and dexterity as my right, so that variable can be ruled out. For the sake of the experiment, I tried it with my right hand upside down, with the moving arm facing downwards to my pointer finger, but no difference either.
Maybe you scissors are better made, or your hand/fingers are stronger.
Without any disrespect, I am serious. Its not my hands are better or anything like that. It's really a left handed scissors. There are scissors specifically made for left handers. And this is one of them. I am not sure why Sog made this decision. The past scissors designs from the powerlock series are right handed.
Well, the scissors from sog had never been great for the record. So.. I am not too surprise that it didn't make the cut this time round.. Mine is terrible as well.
Well, I didn't think you're pulling my leg. :) And I see what you mean with it being left handed, the arms are arranged opposite as on other scissors, I just meant for me it didn't make any difference when trying it left handed. Take thick blades, short lever arms and a too strong spring and you have your PowerPint scissors. :)

Though I sounded like I have alot of complains for the power pint, I am still liking this tool alot. Well mainly because how small and compact this is! Lets face it. The scissors are smallish and most likely suited for light task which I think they are ok-ish. Let's look beyond the scissors! There's the wonderful awl, nice blades, butter spreading file, etc etc....

-
@Sam Lim said:
@Sam Lim said:
[quote author=Sam Lim link=topic=77214.msg1697258#msg1697258 date=1526472630]
Try cutter with your left hand. This is a pair of left handed scissor like I said before earlier.I, am, serious.
Btw, the design of the scissors are off. The handles are too short to give it any kind of proper leverage.
Well, I did just that, but saw no difference, it just chewed on the cardboard, it's too much for it. And let me add that I'm ambidexterous, or mixed handed to be precise, so my left is pretty much the same in strength and dexterity as my right, so that variable can be ruled out. For the sake of the experiment, I tried it with my right hand upside down, with the moving arm facing downwards to my pointer finger, but no difference either.
Maybe you scissors are better made, or your hand/fingers are stronger.
Without any disrespect, I am serious. Its not my hands are better or anything like that. It's really a left handed scissors. There are scissors specifically made for left handers. And this is one of them. I am not sure why Sog made this decision. The past scissors designs from the powerlock series are right handed.
Well, the scissors from sog had never been great for the record. So.. I am not too surprise that it didn't make the cut this time round.. Mine is terrible as well.
Well, I didn't think you're pulling my leg. :) And I see what you mean with it being left handed, the arms are arranged opposite as on other scissors, I just meant for me it didn't make any difference when trying it left handed. Take thick blades, short lever arms and a too strong spring and you have your PowerPint scissors. :)

Though I sounded like I have alot of complains for the power pint, I am still liking this tool alot. Well mainly because how small and compact this is! Lets face it. The scissors are smallish and most likely suited for light task which I think they are ok-ish. Let's look beyond the scissors! There's the wonderful awl, nice blades, butter spreading file, etc etc....

[/quote]Oh yeah, I do like the tool as well for its compactness and versatility, so those who are contemplating buying one, don't let yourselves be turned off by my/our "camplaints", it's still a nice little multitool and I am happy I got one.

-
And I almost forgot: I mentioned I didn't really like the stowash finish, so I polished the middle "panel" on the handles. It came out pretty nice, at least for my eyes. It's not easy to show on camera, but irl it looks quite stylish like this.
-
Hm, I just noticed now, that the plier has slightly different typefaces for the SOG logo on the two sides. Interesting. Since this is my first and only SOG product, I can only speculate why this is. Is this something SOG regularly does? Or did the two halves come from a different batch?


-
Glad everyone is enjoying their Pints. For me, I like almost everything about it. Except the file, but that was expected.
SOG may have a safety flotation device in the PowerPint. The size and amountof tools are impressive. What really impresses me is that the PowerPint might be the smallest multitool with all locking implements. Aside from the LM Leap possibly. I'll have to check that out this evening.
@Exeter said:
Hm, I just noticed now, that the plier has slightly different typefaces for the SOG logo on the two sides. Interesting. Since this is my first and only SOG product, I can only speculate why this is. Is this something SOG regularly does? Or did the two halves come from a different batch?That is so strange. I'll look at mine wheb I get home. Maybe they had some plier halves cast with a different logo design for early/pre production or something. A mystery that should prove interesting to solve. :)
Those handles look really nice with the centers polished, DT!
-
Dutch_Tooler,
My Pint has the same peculiar difference of branding. Kind of neat.And I was wrong. The Pint IS the smallest MT with all locking tools that I know of. The Leap has a few tools that don't lock. :ahhh
The Leap is also more bulky. SOG may have a winner with the PowerPint.



-
All sites are back to saying preorder...

Is there anything on your Pints to designate it as a first production run?
-
@DeezNittles said:
All sites are back to saying preorder...
Is there anything on your Pints to designate it as a first production run?
Possibly the different cast SOG logos on the pliers.

There aren't any numbers or anything, so it's hard to tell.
I hope the Pint can dig SOG out of their metaphorical hole. :) -
All sites are back to saying preorder...

Is there anything on your Pints to designate it as a first production run?
Possibly the different cast SOG logos on the pliers.

There aren't any numbers or anything, so it's hard to tell.
I hope the Pint can dig SOG out of their metaphorical hole. :)Interesting. And yeah, no date stamps or anything.
I guess I'll be pretty annoyed if a second run comes out with a proper, functional file. :) But of course it would be a positive for future buyers, and a good step from the company if they improve the quality.
-
Hey Exeter,
If the newer ones have good files, then we must immediately request SOG send us just the files to install ourselves. :D -
@gerleatherberman said:
Hey Exeter,
If the newer ones have good files, then we must immediately request SOG send us just the files to install ourselves. :D+1

-
@gerleatherberman said:
Hey Exeter,
If the newer ones have good files, then we must immediately request SOG send us just the files to install ourselves. :DIndeed. (Why haven't I thought of that in the first place?)
-
I was working on the scissors the whole afternoon and I think I have figured out what's wrong with it. It's simply a case of bad design. The angle of the "V" opening of the 2 blades are totally off. They does not provide any slicing action but rather 2 pieces of metal trying to go past each other at a very steep angle. It's more like chopping than slicing. The short length of the handle makes it even worse.
I hope people can understand. The left hand cut post another problem. U try to draw a straight line on a piece of paper and try to cut it. You will get what I mean. In case you are wondering, the dime scissors uses a left handed design. So it doesn't cut well either though mine doesn't have much issues. So imo, there's no way to significantly improve the scissors. Well its a small scissors for small tasks. Not the end of the world, but I would say it's a bad failed design.The awl is extremely well designed. But it drew blood the second day on using it.... When u have the PE blade out, watch where your middle finger is resting. There's a high chance it may wander into the handle frame, into the awl. I was aware of this danger so I am always very mindful of it. But that day, I was just fidgeting with the MT and my finger still got caught on the awl.. So this tool is having a trip to the grinder. But it's really a awl with the optimal pokey power. All awls should be made in this design..
-
@Sam Lim said:
I was working on the scissors the whole afternoon and I think I have figured out what's wrong with it. It's simply a case of bad design. The angle of the "V" opening of the 2 blades are totally off. They does not provide any slicing action but rather 2 pieces of metal trying to go past each other at a very steep angle. It's more like chopping than slicing. The short length of the handle makes it even worse.
I hope people can understand. The left hand cut post another problem. U try to draw a straight line on a piece of paper and try to cut it. You will get what I mean. In case you are wondering, the dime scissors uses a left handed design. So it doesn't cut well either though mine doesn't have much issues. So imo, there's no way to significantly improve the scissors. Well its a small scissors for small tasks. Not the end of the world, but I would say it's a bad failed design.The awl is extremely well designed. But it drew blood the second day on using it.... When u have the PE blade out, watch where your middle finger is resting. There's a high chance it may wander into the handle frame, into the awl. I was aware of this danger so I am always very mindful of it. But that day, I was just fidgeting with the MT and my finger still got caught on the awl.. So this tool is having a trip to the grinder. But it's really a awl with the optimal pokey power. All awls should be made in this design..
Sam, how/what are you planning to modify the awl exactly? So far I managed to avoid being stabbed or cut by it, but got close to it myself, so I'd be interested to hear your (planned) solution. Are you thinking of deepening that little notch at the bottom for it to lie a bit deeper when closed?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login