PowerPint Overview Mighty Little MT
-
Glad everyone is enjoying their Pints. For me, I like almost everything about it. Except the file, but that was expected.
SOG may have a safety flotation device in the PowerPint. The size and amountof tools are impressive. What really impresses me is that the PowerPint might be the smallest multitool with all locking implements. Aside from the LM Leap possibly. I'll have to check that out this evening.
@Exeter said:
Hm, I just noticed now, that the plier has slightly different typefaces for the SOG logo on the two sides. Interesting. Since this is my first and only SOG product, I can only speculate why this is. Is this something SOG regularly does? Or did the two halves come from a different batch?That is so strange. I'll look at mine wheb I get home. Maybe they had some plier halves cast with a different logo design for early/pre production or something. A mystery that should prove interesting to solve. :)
Those handles look really nice with the centers polished, DT!
-
Dutch_Tooler,
My Pint has the same peculiar difference of branding. Kind of neat.And I was wrong. The Pint IS the smallest MT with all locking tools that I know of. The Leap has a few tools that don't lock. :ahhh
The Leap is also more bulky. SOG may have a winner with the PowerPint.



-
All sites are back to saying preorder...

Is there anything on your Pints to designate it as a first production run?
-
@DeezNittles said:
All sites are back to saying preorder...
Is there anything on your Pints to designate it as a first production run?
Possibly the different cast SOG logos on the pliers.

There aren't any numbers or anything, so it's hard to tell.
I hope the Pint can dig SOG out of their metaphorical hole. :) -
All sites are back to saying preorder...

Is there anything on your Pints to designate it as a first production run?
Possibly the different cast SOG logos on the pliers.

There aren't any numbers or anything, so it's hard to tell.
I hope the Pint can dig SOG out of their metaphorical hole. :)Interesting. And yeah, no date stamps or anything.
I guess I'll be pretty annoyed if a second run comes out with a proper, functional file. :) But of course it would be a positive for future buyers, and a good step from the company if they improve the quality.
-
Hey Exeter,
If the newer ones have good files, then we must immediately request SOG send us just the files to install ourselves. :D -
@gerleatherberman said:
Hey Exeter,
If the newer ones have good files, then we must immediately request SOG send us just the files to install ourselves. :D+1

-
@gerleatherberman said:
Hey Exeter,
If the newer ones have good files, then we must immediately request SOG send us just the files to install ourselves. :DIndeed. (Why haven't I thought of that in the first place?)
-
I was working on the scissors the whole afternoon and I think I have figured out what's wrong with it. It's simply a case of bad design. The angle of the "V" opening of the 2 blades are totally off. They does not provide any slicing action but rather 2 pieces of metal trying to go past each other at a very steep angle. It's more like chopping than slicing. The short length of the handle makes it even worse.
I hope people can understand. The left hand cut post another problem. U try to draw a straight line on a piece of paper and try to cut it. You will get what I mean. In case you are wondering, the dime scissors uses a left handed design. So it doesn't cut well either though mine doesn't have much issues. So imo, there's no way to significantly improve the scissors. Well its a small scissors for small tasks. Not the end of the world, but I would say it's a bad failed design.The awl is extremely well designed. But it drew blood the second day on using it.... When u have the PE blade out, watch where your middle finger is resting. There's a high chance it may wander into the handle frame, into the awl. I was aware of this danger so I am always very mindful of it. But that day, I was just fidgeting with the MT and my finger still got caught on the awl.. So this tool is having a trip to the grinder. But it's really a awl with the optimal pokey power. All awls should be made in this design..
-
@Sam Lim said:
I was working on the scissors the whole afternoon and I think I have figured out what's wrong with it. It's simply a case of bad design. The angle of the "V" opening of the 2 blades are totally off. They does not provide any slicing action but rather 2 pieces of metal trying to go past each other at a very steep angle. It's more like chopping than slicing. The short length of the handle makes it even worse.
I hope people can understand. The left hand cut post another problem. U try to draw a straight line on a piece of paper and try to cut it. You will get what I mean. In case you are wondering, the dime scissors uses a left handed design. So it doesn't cut well either though mine doesn't have much issues. So imo, there's no way to significantly improve the scissors. Well its a small scissors for small tasks. Not the end of the world, but I would say it's a bad failed design.The awl is extremely well designed. But it drew blood the second day on using it.... When u have the PE blade out, watch where your middle finger is resting. There's a high chance it may wander into the handle frame, into the awl. I was aware of this danger so I am always very mindful of it. But that day, I was just fidgeting with the MT and my finger still got caught on the awl.. So this tool is having a trip to the grinder. But it's really a awl with the optimal pokey power. All awls should be made in this design..
Sam, how/what are you planning to modify the awl exactly? So far I managed to avoid being stabbed or cut by it, but got close to it myself, so I'd be interested to hear your (planned) solution. Are you thinking of deepening that little notch at the bottom for it to lie a bit deeper when closed?
-
@Sam Lim said:
I was working on the scissors the whole afternoon and I think I have figured out what's wrong with it. It's simply a case of bad design. The angle of the "V" opening of the 2 blades are totally off. They does not provide any slicing action but rather 2 pieces of metal trying to go past each other at a very steep angle. It's more like chopping than slicing. The short length of the handle makes it even worse.
I hope people can understand. The left hand cut post another problem. U try to draw a straight line on a piece of paper and try to cut it. You will get what I mean. In case you are wondering, the dime scissors uses a left handed design. So it doesn't cut well either though mine doesn't have much issues. So imo, there's no way to significantly improve the scissors. Well its a small scissors for small tasks. Not the end of the world, but I would say it's a bad failed design.The awl is extremely well designed. But it drew blood the second day on using it.... When u have the PE blade out, watch where your middle finger is resting. There's a high chance it may wander into the handle frame, into the awl. I was aware of this danger so I am always very mindful of it. But that day, I was just fidgeting with the MT and my finger still got caught on the awl.. So this tool is having a trip to the grinder. But it's really a awl with the optimal pokey power. All awls should be made in this design..
Sam, how/what are you planning to modify the awl exactly? So far I managed to avoid being stabbed or cut by it, but got close to it myself, so I'd be interested to hear your (planned) solution. Are you thinking of deepening that little notch at the bottom for it to lie a bit deeper when closed?
I am not going that direction.. That would make that particular tools recessed and sort of ruin the outlook.. I just grounded some material off the back of the awl. Its still super effective.

It doesn't have to be much and doesn't seem much. But enough to be safe.

-
Ah, I see, nice and simple. I overthought it. :D
-
Well..
I just snapped my spring for the scissors.. I swear I was using it normally.. Can't say I am surprised.. So this marks the end for my ranting of the scissors.. 

-
@Sam Lim said:
Well..
I just snapped my spring for the scissors.. I swear I was using it normally.. Can't say I am surprised.. So this marks the end for my ranting of the scissors.. 
Not again

This is happening a couple of times now :ahhh :ahhh
It happened to a member on here with the PAD
Were the spring broke for the lock mechanism ??? >:( -
@Sam Lim said:
Well..
I just snapped my spring for the scissors.. I swear I was using it normally.. Can't say I am surprised.. So this marks the end for my ranting of the scissors.. 
Not again

This is happening a couple of times now :ahhh :ahhh
It happened to a member on here with the PAD
Were the spring broke for the lock mechanism ??? >:(To be honest, I am not really surprised by it. Not even angry.. Amused really.
Not really sure what u meant by "Were the spring broke for the lock mechanism ???" .. But looking at the spring method they have used for the locking tabs, I think that will be another very possible failure...
I am pretty fast at working/breaking apart things nowadays.. its midnight now so I am only using "quiet" hand tools.. Some changes were made to the loadout. Broken scissors and serrated blade removed.

Some filing work of course. Though the pivot size are different, It doesn't prevent the wave scissors to lock up properly and perfectly functional. The wave scissors was from my parts bin.The thumb pad was broken originally, that's why the handles on this scissors are so short. If done on a proper wave scissors, It should be another 10mm longer, which is a very decent length. Mighty package opener from a Dime of course.( from ThePeacent )


-
Sorry for not explaining it properly
And my bad spelling
The springs I mean are on the handle
Better way here is a pic


-
I would love to see a replaceable spring system
That can just be clipped on to the handles

-
I think Gerber(saf-t-lock) is the only current producer of an MT with replaceable springs. LM, Vic, and SOG have permanent springs. Either riveted on (Vic) or part of the handle.
Some exemptions apply, but for the most part, these comanies really don't care about a tool lasting forever.But, SOG, the springs need to hold up more than a week.

-
@gerleatherberman said:
But, SOG, the springs need to hold up more than a week.
the only two things I've broken in my SOGs are a scissors spring
and a dented cable cutter 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login