Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
Nice start, guys. Eager to join you in a couple of days!
Sent from my iPhone using Tapatalk
-
Thanks Nix

Have a safe trip and can’t wait to have you joining us
-
Powernoodle Day 3

-
Day 3
Today I had to adjust the fan in the downstairs toilet
It stays on for 30 minutes after you leave the toilet
Which is to long :ahhh
So today I used the jewellers driver
to turn the adjuster down to 10 minutes
The length of the driver helped as the adjuster is set far back in the fan



-
@Wspeed said:
the fan in the downstairs toiletIt stays on for 30 minutes after you leave the toilet
Which is too long :ahhhIf you've ever had some of ThePeacent's cabbage and jalapeno casserole, you'll know that sometimes 30 minutes isn't enough.
Good one

I don’t think any fan would
be strong enough for TPs toilet
:D -
Nothing person, TP. Its that incredible Spanish cuisine.

-
**Day 3 **
From the bathroom to a bedroom. Door handle retainer plate was reported loose. PAD to the rescue. The medium screwdriver on the cap lifter's end is not bad at all, sits well in the screw head slot.
Later tonight I shall use the cap lifter for its intended purpose

Come to think of it, or rather of the can opener: I don't think I have any old-fashioned cans anymore, only those with quick-pull tabs...


Sent on my SM-G930F with Tapatalk
-
I have the same problem with bottles
Most of them now have screw tops
And not the old cap lifter anymore :ahhh :ahhh -
Back to the short saw... I've found a spare ST300 saw in my parts bin which is making me think...


Edit: and the file, too. The ST300's file is both longer and better than the one on the PAD. Hmmm...
Sent on my SM-G930F with Tapatalk
-
@Dutch_Tooler said:
Back to the short saw... I've found a spare ST300 saw in my parts bin which is making me think...
Sent on my SM-G930F with Tapatalk
That looks a lot more usable D_T

Have you got a spare file as well
As that could make the PAD more useful
-
Early pros and cons for me, subject to change:
<u>Pros</u>
- compound leverage pivot is one of the best features on any MT; I knew that a long time ago
- outside opening tools for quick deployment
- real 3D phillips with adequate reach
- it has a saw
- 1/4" driver
- hard wire cutter ate a 10d nail with no problem
<u>Cons</u>
- overall cheap feel
- flimsy main blade; a longer saw could have been used
- tools can accidentally deploy past 180 degrees; no big deal, but not a sign of tight engineering and quality
- file appears to be almost non-functional, but more data is required. Did SOG think we wouldn't notice?
- jewelry driver, can open and cap lifter are unnecessary; space could have been used for scissors
- phillips shank is offset which limits reach in countersunk holes
Current Powernoodle Dynamic Assessment Rating ("CPDAR"): 5/10
-
Cap lifter lifts caps. Had to apply it a second time though, the first time the hook slipped out from under the cap. Operator error can be excluded, it's only my first :D

Sent on my SM-G930F with Tapatalk
-
That’s a shame TP :ahhh :ahhh
Have you got a pic of the braided wire you cut
well, actually yes I have. :D After all the drama to cut that d*rn wire I sure was going to keep it

Next to a Rambler and Spirit for size reference, is just what I had laying on the table

Thanks TP

You would think that it is ok to cut wire
Are you going to send it to SOG for warranty
-
I've been doing outside work today (95 F out and humid) and haven't gotten a chance to use the pad yet, but will be working on something different in a bit and shall use it then. :)
-
I've bought three packs of these hangers for hammers and mallets($1 for five) so far. Now I have them everywhere to keep from laying hammers on stuff that could get damaged.
Putting another one on the table utilized the awl and dedicated phillips driver. The awl was very good at drilling the hardwood. The phillips driver did what it was supposed to do and screwed in the #1 3/8" wood screws with normal applied force.



-
I would like to mention something about SOG saws. They have been shorter than they could have made them since the PowerPlier(with exception of the PowerPlay and Paratool?).
Even my beloved PowerLock has a comically short saw. However, with that being said, the "whispy"(for lack of a better word) PE/SE blades are longer, so they did fix two of the four "shorter" tools that have plagued SOGs older designs, even though they are not likely to be as robust.
I am not sure what to say about the PAD file. Is it some kind of MT hipster irony that it is so bad? The PowerLock file(round and flat versions) are very acceptable.
Comparison pics:



-
Day 4
The awl is pretty good. My belt's inability to hold up my trousers had been bothering me for a few days already (crikey, have I lost weight?) and I decided to put the PAD's awl to the test on the sturdy leather. No major problems there.



**<u>
Edit: </u>**Now, regarding that file...
I have taken a somewhat closer look at the file and I think a case can be made for the manufacturer having committed an act of felony.I am serious.
The manufacturer declares this tool as a file.
According to all definitions I know, a file has teeth.
See e.g. Wikipedia: "A file is a tool used to remove fine amounts of material from a workpiece. It is common in woodworking, metalworking, and other similar trade and hobby tasks. Most are hand tools, made of a case hardened steel bar of rectangular, square, triangular, or round cross-section, with one or more surfaces cut with sharp, generally parallel teeth" (emphasis added).In metal- and woodworking, a tooth on a tool has a triangular shape and is characterised by having more or less slanted sides and an apex.
I have taken a magnifying glass to the so-called "file" and confirmed my initial assessment that whatever this file has, it does not include teeth. The ridges left over after applying the shallow parallel incisions are generally flat-topped and fail to produce the required apex. Therefore, no teeth are present. Therefore the "file" is not a file.
I have also compared the PAD's flat piece of metal with shallow grooves with real files as found on Victorinox and Leatherman products, which can be said to be the leading manufacturers each in their own aspect of the multitool business. All these files have teeth, and therefore one can say that these represent the state of the art, even in the multitool business. By declaring said flat piece of metal with shallow grooves to be a file, in the knowledge that even in the multitool business, a file is generally known as having teeth, and therefore must be presumed to have teeth, SOG are misrepresenting their product and thereby cheating (swindling, deceiving, defrauding?) the client.
Now, being in Europe, even if I wanted to, I can't (yet) start a class action suit, but maybe one of our interested members in the US can?
Anyway, rant over, just wanted to get this off my chest, take it as you will.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

